1. Safety Information
Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in serious injury or property damage.
- Maximum Weight Capacity: Do not exceed 475 lbs (215 kg).
- Secure Anchoring: Always ensure the hammock is securely anchored to stable supports.
- Spreader Bars: Always use the hammock with the provided spreader bars.
- Children: Keep children away from the hammock unless supervised by an adult.
- Inspection: Regularly inspect all components for wear, damage, or loose connections. Do not use if any part is damaged.
- Placement: Place the hammock on a level, stable surface. Avoid placing near open flames, sharp objects, or uneven terrain.
2. Package Contents
Verify that all components are present before beginning assembly.

Image: All components, including wooden stand pieces, hammock fabric, pillow, hardware, and instruction manual, laid out on a grassy surface.
- Wooden Hammock Stand (Larch wood)
- Double Hammock (Two-layer quilted polyester fabric with poly fiber filling)
- Polyethylene-stuffed Head Pillow
- Hardwood Spreader Bars (55 inch)
- Steel Chains and Carabiners
- Balance Ropes
- Assembly Hardware (screws, washers, nuts)
- Assembly Tools
- Hammock Rain Cover
3. Setup and Assembly
Follow these steps to assemble your SUNCREAT Double Hammock with Wooden Stand. It is recommended to have two people for easier assembly.
3.1. Assemble the Wooden Stand Base

Image: A person kneeling on grass, assembling the curved wooden pieces of the hammock stand base.
- Identify the 'B' pieces of wood (curved base sections) and 'C' pieces (vertical support legs).
- Orient the 'B' pieces so that the larger holes face outwards.
- Attach the 'C' pieces to the 'B' pieces, ensuring the ledge on the 'C' pieces faces inwards towards the middle of the stand.
- Secure these connections using the provided 'D' screws, threading them through the pre-drilled holes. Do not fully tighten yet.
3.2. Attach the Upper Curved Sections

Image: A person attaching the upper curved wooden pieces to the base of the hammock stand, showing the sturdy construction.
- Take the 'A' pieces of wood (upper curved sections).
- Orient them so the holes on the outside edge face upwards.
- Align the holes of the 'A' pieces with the corresponding holes on the assembled base.
- For the inner connections, use the long 'H' screws with 'E' washers. Thread them through all three pieces of wood and secure with a nut ('F') on the other side. Tighten using the provided tools.
- For the outer connections, use the 'N' screw (open-ended) with a 'P' ring and 'E' washer. Thread through and secure.
- Once all screws are in place, fully tighten all connections on the underside of the stand.
3.3. Attach Hanging Accessories

Image: A close-up view of the steel chains and carabiners securely attached to the top ends of the wooden hammock stand.
- Attach the 'K' hooks (carabiners) to the designated holes on each end of the wooden stand.
- Ensure they are securely fastened.
3.4. Hang the Hammock

Image: A person kneeling beside the hammock stand, demonstrating how to loop the balance ropes around the wooden piece and secure them with a carabiner.
- Unroll the hammock fabric.
- Attach the chains from the hammock to the carabiners on each end of the stand. Adjust the chain links to achieve your desired hammock height and tension.
- Take the four balance ropes. Create a loop around the wooden spreader bar of the hammock, between the first and second rope holes.
- Hook the carabiner on the end of the balance rope to the designated attachment point on the lower part of the wooden stand. Repeat for all four ropes.
3.5. Assembly Video Guide
Video: A detailed step-by-step installation guide for the SUNCREAT Double Hammock with Wooden Stand. This video demonstrates the assembly process from unboxing to final setup, including attaching the wooden pieces, securing hardware, and hanging the hammock.
Video: An official product video from Suncreat Outdoor showcasing the assembly and features of the SUNCREAT Double Hammock with 14 ft Wooden Stand.
4. Operating Instructions
Enjoy your SUNCREAT Double Hammock safely and comfortably.

Image: A couple enjoying the spacious and comfortable double hammock, positioned next to a pool.
- Entering the Hammock: Carefully sit in the center of the hammock, distributing your weight evenly.
- Exiting the Hammock: Slowly shift your weight to one side and stand up.
- Pillow Adjustment: The polyethylene-stuffed head pillow can be adjusted or removed as desired for optimal comfort.
- Capacity: The hammock is designed to comfortably support up to two people, with a maximum capacity of 475 lbs.
5. Maintenance
Proper care will extend the life and appearance of your hammock.

Image: The included black rain cover protecting the hammock from outdoor elements.
- Cleaning the Hammock Fabric: The two-layer quilted polyester fabric is designed to be non-fading. For general cleaning, spot clean with mild soap and water. Allow to air dry completely.
- Wooden Stand Care: The 100% Larch wood stand is coated with varnish for durability and easy cleaning. To prolong its lifetime, store it indoors when not in use for extended periods or during harsh weather.
- Hammock Cover: Use the included rain cover to protect the hammock from sun, rain, and snow when not in use. This helps maintain its condition and color.
- Hardware: Periodically check all nuts, bolts, and chains to ensure they are tight and free from rust or corrosion.
6. Troubleshooting
Common issues and solutions.
- Hammock feels unstable: Ensure all assembly bolts are securely tightened. Check that the balance ropes are correctly tied between the first and second rope holes on the spreader bar and hooked to the stand.
- Hammock is too low/high: Adjust the length of the chains connecting the hammock to the stand's carabiners to achieve the desired height.
- Missing parts: If any parts are missing upon arrival, please contact SUNCREAT customer support.
- Damage during shipping: If the product arrives damaged, document the damage with photos and contact SUNCREAT customer support immediately.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | SUNCREAT |
| Model | B0FM3MSHVD |
| Material | Larch Wood, Polyester, Hardwood, Steel |
| Color | Beige |
| Product Dimensions (L x W) | 162"L x 55.1"W |
| Maximum Weight Recommendation | 475 Pounds |
| Seating Capacity | 2 Persons |
| Included Components | Wooden Stand, Double Hammock, Rain Cover |
8. Warranty and Support
For warranty information or customer support, please refer to the product packaging or contact SUNCREAT directly through their official website or the retailer where the product was purchased. Keep your purchase receipt for any warranty claims.



