YITAHOME Lift Top Coffee Table Set with Storage Ottoman Bench & Wheels - Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your YITAHOME Lift Top Coffee Table Set. This versatile furniture piece features a dual lift-top design, hidden storage compartments, and a nesting ottoman bench with wheels, offering multiple configurations for various uses.

Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.

Description: The YITAHOME Lift Top Coffee Table Set in a living room setting, showcasing the table with its top extended for dining and the accompanying ottoman bench.

2. Safety Information

To prevent injury or damage to the product, observe the following safety precautions:

• Exercise caution when operating the lift-top mechanisms. Keep hands and fingers clear of moving parts to avoid pinching.
• Do not allow children to play on or around the table unsupervised, as there is a risk of tip-over or injury from moving parts.
• Be aware of the rolling wheels on the ottoman to prevent accidental movement or falls.
• Always follow the assembly instructions precisely. Incorrect assembly can compromise the stability and safety of the unit.
• Do not overload the table or storage compartments. Refer to the specifications for weight limits.
• Avoid placing hot items directly on the table surface without protective coasters.
• Regularly inspect all fasteners and connections to ensure they remain tight. Tighten as needed.

3. Parts List

Before beginning assembly, verify that all parts and hardware are present. Refer to the assembly video for visual identification of components.

3.1. Main Table Components

• Lift-top panels (2)
• Table base panels (various sizes)
• Internal shelf panels (various sizes)

3.2. Ottoman Bench Components

• Ottoman body panels (various sizes)
• Padded seat lid
• Wheels (4)

3.3. Hardware

Various screws, dowels, cam locks, hinges, and lift mechanisms are included. Please refer to the assembly video for specific hardware identification per step.

4. Assembly Instructions

Assembly requires careful attention to detail. It is recommended to have a second person assist with certain steps. A screwdriver is required (not always included). Ensure you have ample space to work.

4.1. Assembly Video Guide

For a visual step-by-step guide, please watch the official assembly video below. This video demonstrates the complete assembly process for the YITAHOME Lift Top Coffee Table Set.

4.2. Step-by-Step Assembly (Summary from Video)

1. Prepare Base Panels: Attach dowels and screws to the designated holes on the main base panels.
2. Assemble Inner Shelves: Connect the smaller shelf panels to form the internal structure of the coffee table base using screws and dowels.
3. Attach Side Panels: Secure the side panels to the assembled inner shelves, ensuring proper alignment.
4. Install Top Support Rails: Fasten the top support rails to the upper edges of the table base.
5. Mount Lift Mechanisms: Attach the metal lift mechanisms to the underside of the main lift-top panels using screws.
6. Secure Lift-Top Panels: Carefully position and secure the lift-top panels with the attached mechanisms to the table base.
7. Assemble Ottoman Base: Construct the ottoman bench base using the provided panels, screws, and dowels.
8. Install Ottoman Wheels: Attach the four rolling wheels to the bottom of the ottoman bench.
9. Attach Ottoman Lid Hinges: Secure the hinges to the ottoman bench and the padded seat lid.
10. Final Checks: Ensure all screws are tightened and the table and ottoman are stable.

Note: The assembly video provides detailed visual guidance for each step, including specific hardware usage.

5. Operation

Your YITAHOME Lift Top Coffee Table Set is designed for versatile use. Here's how to operate its key features:

5.1. Lift-Top Mechanism

The coffee table features a dual lift-top design. To raise a tabletop, gently pull it upwards. The reinforced metal lifting mechanism will assist in raising and holding the top in place. To lower, gently push the tabletop down until it rests in its original position. The smaller lift-top panel has a rebound function for ease of use.

Description: Image showing the YITAHOME Lift Top Coffee Table in its standard configuration, with one side lifted, both sides lifted, and fully extended for dining.

5.2. Hidden Compartments

Beneath the lift-tops, there are hidden compartments for storing items like books, blankets, or remote controls. Simply lift the tabletop to access these spaces.

5.3. Storage Ottoman Bench

The included ottoman bench nests perfectly under the coffee table. It features a hinged, padded lid that opens to reveal additional storage space. The ottoman is equipped with 360-degree rolling wheels for easy movement. To use, simply roll it out from under the table. To store, roll it back into place.

Description: Image showing the ottoman bench pulled out from under the coffee table, with its lid open to display the internal storage capacity.

6. Maintenance

Proper care will extend the life and appearance of your coffee table set.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Promptly wipe up spills to prevent staining, especially on the wooden surfaces.
• Heat Protection: Always use coasters or placemats under hot dishes or beverages to protect the tabletop.
• Fasteners: Periodically check all screws and connections and tighten them as necessary to maintain stability.
• Moving: When moving the table, lift it rather than dragging it to prevent damage to the legs and floor.
• Ottoman Care: For the faux leather cushioning, wipe with a damp cloth. Avoid excessive moisture.

7. Troubleshooting

If you encounter issues during assembly or use, refer to the following common solutions:

8. Specifications

Description: Diagram illustrating the precise dimensions of the coffee table and the storage ottoman, including height, width, and depth measurements.

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your product or contact YITAHOME directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.