1. Introduction
The Jansite MT07A+Z035B is a 7-inch IPS display designed for motorcycles, offering seamless integration of Apple CarPlay and Android Auto. This device enhances your riding experience by providing navigation, communication, and entertainment directly on your motorcycle's dashboard. It features dual Bluetooth connectivity, support for Siri and Google Assistant, and an IP67 waterproof rating for reliable performance in various weather conditions. The exclusive Z035B mount is specifically engineered for BMW motorcycles, ensuring a secure and user-friendly installation.
Figure 1.1: Jansite 7-inch Motorcycle CarPlay/Android Auto Display. This image shows the front view of the device, highlighting its 7-inch screen and sleek design, ready for motorcycle mounting.
2. Package Contents
Please check the package contents carefully upon unboxing. If any items are missing or damaged, contact customer support.
- 1 x Jansite Motorcycle CarPlay Display (MT07A)
- 1 x BMW Specific Mounting Bracket (Z035B)
- 1 x Power Cable
- 1 x User Manual
3. Safety Information
Read all safety warnings and instructions before using this product to prevent injury or damage. Keep this manual for future reference.
- Installation: Ensure the device is securely mounted and does not obstruct your view or interfere with motorcycle controls. Improper installation can lead to accidents.
- Power: Connect the device to a suitable 12V DC power source on your motorcycle. Do not attempt to modify the power cable or use non-approved power adapters.
- Operation: Operate the device only when it is safe to do so. Avoid prolonged distraction while riding. Always prioritize road safety.
- Water Resistance: The device is IP67 waterproof. While designed for outdoor use, avoid submerging it in water or exposing it to high-pressure water jets.
- Temperature: Do not expose the device to extreme temperatures (below -20°C or above 70°C) or direct sunlight for extended periods.
4. Setup and Installation
The Jansite MT07A+Z035B is designed for straightforward installation, particularly with its exclusive Z035B mount for BMW motorcycles. This plug-and-play system minimizes complex wiring.
4.1 Mounting the Display
- Identify the designated mounting point on your BMW motorcycle for the Z035B bracket. This is typically near the handlebars or dashboard.
- Securely attach the Z035B mounting bracket to your motorcycle using the provided hardware. Ensure it is firm and does not vibrate excessively.
- Slide the Jansite display unit onto the Z035B bracket until it clicks into place. Verify that the display is locked and stable.
- Adjust the viewing angle of the display for optimal visibility without obstructing your view of the road or motorcycle instruments.
4.2 Power Connection
- Connect the provided power cable to the power input port on the Jansite display.
- Route the power cable safely along your motorcycle's frame, away from moving parts or heat sources.
- Connect the other end of the power cable to your motorcycle's 12V DC power supply. It is recommended to connect to a switched power source that turns on and off with the ignition to prevent battery drain.
- Once connected, turn on your motorcycle's ignition. The display should power on automatically.
5. Operating Instructions
This section covers the basic operation and connectivity features of your Jansite display.
5.1 Initial Power On and Setup
- After connecting power, the device will boot up. Follow any on-screen prompts for initial language and time zone settings.
- The main interface will display options for CarPlay, Android Auto, Bluetooth, and system settings.
5.2 Bluetooth Connectivity
The device supports dual Bluetooth connections: one for your smartphone and another for your Bluetooth helmet or headset.
- Pairing your Smartphone:
- Go to the 'Bluetooth' menu on the display.
- Enable Bluetooth on your smartphone and set it to 'discoverable'.
- Select your smartphone from the list of available devices on the display and pair them. Confirm the pairing code if prompted.
- Pairing your Bluetooth Helmet/Headset:
- Ensure your smartphone is already paired and connected to the display.
- Put your Bluetooth helmet or headset into pairing mode.
- On the display's 'Bluetooth' menu, search for and select your helmet/headset to pair.
- Audio from CarPlay/Android Auto will now be routed to your helmet.
5.3 Apple CarPlay / Android Auto
Once your smartphone is paired via Bluetooth, you can initiate CarPlay or Android Auto.
- Ensure your smartphone has CarPlay (for iOS) or Android Auto (for Android) enabled and running.
- On the display's main interface, select the 'CarPlay' or 'Android Auto' icon.
- The display will automatically connect to your phone and launch the respective interface.
- You can now access navigation, music, calls, and messages through the display, controlled by touch or voice commands (Siri/Google Assistant).
5.4 Voice Assistant (Siri/Google Assistant)
With CarPlay or Android Auto active, you can use voice commands:
- Press the dedicated voice assistant button on the display (if available) or use the voice command prompt on the screen.
- Speak your command clearly, such as "Navigate to [address]", "Play [song name]", or "Call [contact name]".
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your Jansite display.
- Cleaning: Use a soft, damp cloth to clean the screen and exterior. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the display or casing.
- Waterproofing: While IP67 rated, regularly check that all port covers are securely closed to maintain water resistance. Do not intentionally submerge the device.
- Storage: If storing the motorcycle for an extended period, it is recommended to remove the display unit and store it in a dry, temperate environment to prevent theft and protect it from extreme conditions.
- Software Updates: Periodically check the manufacturer's website for any available firmware updates to ensure optimal performance and access to new features.
7. Troubleshooting
If you encounter issues with your Jansite display, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | No power connection or faulty cable. | Check power cable connections to the display and motorcycle. Ensure the motorcycle ignition is on. Test the power source. |
| Cannot connect to CarPlay/Android Auto. | Bluetooth not paired, app not running, or phone settings. | Ensure your smartphone is paired via Bluetooth. Verify CarPlay/Android Auto is enabled on your phone. Restart both devices. |
| No audio from helmet. | Helmet not paired or incorrect audio routing. | Ensure your Bluetooth helmet is paired to the display. Check audio output settings on the display. |
| Touchscreen unresponsive. | Software glitch or physical damage. | Restart the device. If the problem persists, contact customer support. |
8. Specifications
Key technical specifications for the Jansite MT07A+Z035B display.
- Model Number: MT07A+Z035B
- Screen Size: 7 Inches
- Display Type: IPS
- Connectivity Technology: Bluetooth
- Special Features: Android Auto, Apple CarPlay, BMW Mount
- Waterproof Rating: IP67
- Compatible Devices: Smartphone
- Map Type: Europe (GPS functionality)
- Package Dimensions: 22.5 x 15.5 x 11 cm
- Item Weight: 1 Kilogram
- Batteries Included: No
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Jansite website. Keep your proof of purchase for warranty claims.
If you require assistance beyond the troubleshooting steps provided in this manual, please contact Jansite customer service through their official channels.
