KWANWA LED Digital Alarm Clock

KWANWA LED Digital Alarm Clock User Manual

Model: LED Digital Alarm Clock (KW628)

Introduction

Thank you for choosing the KWANWA LED Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

This alarm clock features a vibrant RGB display with 8 lighting modes, a reliable alarm with snooze function, a 3-level dimmer, and a battery backup system to ensure your alarm functions even during power outages.

Setup

Power Connection

  1. Connect the provided DC5V adapter to the power input port on the back of the alarm clock.
  2. Plug the adapter into a standard electrical outlet. The display will light up.
KWANWA LED Digital Alarm Clock with power adapter and cable

Image: The alarm clock connected to its power adapter and cable, ready for use.

Battery Backup Installation

The alarm clock requires 3 AA batteries (not included) for backup power. This feature ensures that the time settings and alarm functions are maintained during a power outage. The display will not remain lit during battery backup mode to conserve energy, but the alarm will still sound.

  1. Locate the battery compartment on the back of the alarm clock.
  2. Open the battery compartment cover.
  3. Insert 3 new AA batteries, ensuring correct polarity (+ and -).
  4. Close the battery compartment cover securely.
KWANWA LED Digital Alarm Clock with power outage symbol and battery backup explanation

Image: Illustration showing the alarm clock's battery backup feature during a power outage.

Operating Instructions

Familiarize yourself with the control buttons located on the back of the unit:

Close-up of the KWANWA LED Digital Alarm Clock's control buttons: Time Set, AL Set, UP/Dimmer, DOWN/AL ON/OFF

Image: Rear view of the alarm clock showing the control buttons: TIME SET, AL SET, UP/DIMMER, DOWN/AL ON/OFF.

Setting the Time

  1. Press and hold the TIME SET button until the hour digits begin to flash.
  2. Use the UP/DIMMER and DOWN/AL ON/OFF buttons to adjust the hour.
  3. Press TIME SET again to move to the minute digits. Adjust minutes using the UP/DIMMER and DOWN/AL ON/OFF buttons.
  4. Press TIME SET once more to confirm and exit time setting mode.

12/24 Hour Format Conversion

To switch between 12-hour and 24-hour time formats:

  • While in normal time display mode, press the TIME SET button once. The display will toggle between 12-hour (with PM indicator) and 24-hour formats.
KWANWA LED Digital Alarm Clock showing 12-hour and 24-hour time formats

Image: Comparison of the alarm clock display in 12-hour format (with PM indicator) and 24-hour format.

Setting the Alarm

  1. Press and hold the AL SET button until the alarm hour digits begin to flash.
  2. Use the UP/DIMMER and DOWN/AL ON/OFF buttons to adjust the alarm hour.
  3. Press AL SET again to move to the alarm minute digits. Adjust minutes using the UP/DIMMER and DOWN/AL ON/OFF buttons.
  4. Press AL SET once more to confirm and exit alarm setting mode.

Activating/Deactivating the Alarm

  • To activate the alarm, press the DOWN/AL ON/OFF button once. An alarm icon will appear on the display, indicating the alarm is active.
  • To deactivate the alarm, press the DOWN/AL ON/OFF button again. The alarm icon will disappear.

Snooze Function

  • When the alarm sounds, press the large SNOOZE button on top of the clock to temporarily silence the alarm. The alarm will sound again after 7 minutes.
  • The snooze function can be used up to 3 times.
  • To turn off the alarm completely after it sounds, press the DOWN/AL ON/OFF button.

Adjusting Display Brightness (Dimmer)

The display has 3 brightness levels (High, Medium, Low) for comfortable viewing at any time of day or night.

  • Press the UP/DIMMER button repeatedly to cycle through the brightness levels: High → Medium → Low → High.
KWANWA LED Digital Alarm Clock showing different brightness levels in a bedroom setting

Image: The alarm clock display shown at different brightness levels, suitable for day and night use.

Changing RGB Display Colors

The alarm clock features 8 dynamic RGB lighting effects for the display. A dedicated button (often on the top or back) is used to cycle through these modes.

  • Press the RGB button (refer to your physical unit for exact location) to cycle through the 8 display modes:
    • Cycling RGB Colors
    • Solid White
    • Solid Pink
    • Solid Green
    • Solid Blue
    • Left-to-Right Gradient
    • Top-to-Bottom Gradient
    • Random Colors
KWANWA LED Digital Alarm Clock displaying 8 different RGB color modes

Image: Visual representation of the 8 dynamic RGB display modes available on the alarm clock.

Maintenance

  • Cleaning: Wipe the clock's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Battery Replacement: Replace the AA backup batteries annually or when the clock is stored for extended periods to prevent leakage.
  • Storage: If storing the clock for a long time, remove the batteries and disconnect it from the power source. Store in a cool, dry place.

Troubleshooting

Problem Possible Cause Solution
Clock display is off. No power from adapter or power outage. Ensure the adapter is securely plugged into the clock and a working outlet. Check if there's a power outage. If using battery backup, the display will be off to save power.
Alarm does not sound. Alarm is not activated or set incorrectly. Verify the alarm icon is visible on the display. Re-check alarm time settings.
Time/Alarm settings reset after power loss. Backup batteries are dead or not installed. Install 3 fresh AA batteries or replace existing ones.
Display is too bright/dim. Brightness level needs adjustment. Press the UP/DIMMER button to cycle through brightness levels.

Specifications

  • Model Number: LED Digital Alarm Clock (KW628)
  • Brand: KWANWA
  • Dimensions (L x W x H): 18 x 3.81 x 7.7 cm (7.1 x 1.5 x 3.0 inches)
  • Weight: 280 grams (0.62 lbs)
  • Power Source: DC5V Adapter (included), 3x AA Batteries (not included) for backup
  • Display Type: Digital LED
  • Screen Size: 1.9 inches
  • Display Colors: 8 RGB modes (White, Pink, Green, Blue, Cycling RGB, Left-to-Right Gradient, Top-to-Bottom Gradient, Random Colors)
  • Brightness Levels: 3 (High, Medium, Low)
  • Alarm Features: Single alarm, 7-minute snooze (up to 3 times)
  • Time Format: 12-hour / 24-hour selectable
  • Material: Plastic
  • Mounting Type: Table Mount
  • Usage: Indoor
  • Manufacturer: Guangkehua

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact KWANWA customer service directly. Contact details are typically available on the product packaging or the official KWANWA website.

Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.