Fakir Inovator 6157 Cordless Stick Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Fakir Inovator 6157 Cordless Stick Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.

Important Safety Instructions

• Always ensure the appliance is switched off and unplugged before cleaning or performing maintenance.
• Do not use the vacuum cleaner to pick up water or wet substances.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not pick up burning or smoking materials, such as cigarettes, matches, or hot ashes.
• Use only manufacturer-recommended attachments.
• Store the appliance indoors in a dry place.

2. Product Overview

Familiarize yourself with the components of your Fakir Inovator 6157 vacuum cleaner.

Figure 1: Fully assembled Fakir Inovator 6157 Cordless Stick Vacuum Cleaner. This image shows the complete unit in its upright stick configuration, featuring the main motor unit at the top, the red extension tube in the middle, and the floor nozzle at the bottom. The power button and battery indicator lights are visible on the top part of the motor unit.

Figure 2: Fakir Inovator 6157 handheld unit. This image displays the main motor unit detached, showing the ergonomic handle, the transparent dustbin, and the power controls. A crevice tool attachment is also visible, ready for use with the handheld configuration.

Main Components:

1. Main Motor Unit (includes motor, dustbin, handle, controls)
2. Extension Tube
3. Motorized Floor Nozzle
4. Crevice Tool (typically included)
5. Brush Tool (typically included)
6. Charging Adapter

3. Setup

3.1 Assembly

1. Insert the extension tube into the main motor unit until it clicks securely into place.
2. Attach the motorized floor nozzle to the other end of the extension tube, ensuring it clicks into place.
3. For handheld use, attach desired accessories (crevice tool, brush tool) directly to the main motor unit.

3.2 Charging the Battery

• Before first use, fully charge the vacuum cleaner for approximately 4-5 hours.
• Connect the charging adapter to the charging port on the main motor unit.
• Plug the adapter into a suitable wall outlet.
• The battery indicator lights on the main unit will illuminate to show charging status. They will typically stop blinking or change color when fully charged.
• Do not operate the vacuum cleaner while it is charging.

4. Operating Instructions

4.1 Power On/Off and Suction Modes

• To turn on the vacuum cleaner, press the power button located on the main motor unit.
• The vacuum will typically start in standard suction mode.
• Press the mode selection button (if available, usually near the power button) to switch between standard and boost suction modes. Boost mode provides stronger suction for tougher messes but reduces battery life.
• To turn off the vacuum cleaner, press the power button again.

4.2 Using Attachments

• Motorized Floor Nozzle: Ideal for cleaning various floor types, including hard floors and carpets. The rotating brush helps to agitate dirt and debris.
• Crevice Tool: Use for narrow gaps, corners, and hard-to-reach areas.
• Brush Tool: Suitable for delicate surfaces, upholstery, and removing pet hair from fabrics.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

5.1 Emptying the Dustbin

1. Ensure the vacuum cleaner is switched off.
2. Locate the dustbin release button, usually on the main motor unit.
3. Press the button to detach the dustbin.
4. Hold the dustbin over a waste bin and open the bottom flap to empty the contents.
5. Close the flap and reattach the dustbin to the main unit until it clicks.

5.2 Cleaning Filters

• Filters should be cleaned regularly, ideally after every few uses, or when suction power decreases.
• Remove the filters from the dustbin (refer to the product diagram for exact location).
• Tap the filters gently to remove loose dust. For thorough cleaning, rinse them under cold running water.
• Allow filters to air dry completely for at least 24 hours before reinserting them. Do not use a dryer or direct heat.
• Replace filters if they are damaged or excessively worn.

5.3 Cleaning the Brush Roll

• Turn off the vacuum cleaner and detach the floor nozzle.
• Locate the brush roll access cover on the bottom of the floor nozzle.
• Open the cover (may require a coin or screwdriver) and remove the brush roll.
• Carefully cut away any tangled hair or fibers using scissors.
• Clean any debris from the brush roll housing.
• Reinsert the brush roll and secure the cover.

6. Troubleshooting

Refer to this section for solutions to common issues you might encounter.

7. Specifications

• Brand: Fakir
• Model Name: INOVATOR6157
• Form Factor: Stick
• Color: Red
• ASIN: B0FLYLRW4L
• First Available Date: August 6, 2025
• Note: Specific power, battery capacity, and run-time details are not provided in the source data. Please refer to product packaging or official Fakir website for full technical specifications.

8. Warranty and Support

For warranty information, product registration, or technical support, please refer to the warranty card included with your purchase or visit the official Fakir website. Keep your proof of purchase for any warranty claims.

For further assistance, you may contact Fakir customer service through their official channels.