Calex Falerna Rechargeable Outdoor Wall Light (Set of 4)

Introduction

Thank you for choosing the Calex Falerna Rechargeable Outdoor Wall Light set. This manual provides essential information for the safe and efficient use of your new lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.

This set includes four modern, cubic-shaped outdoor wall lights designed to provide warm white (2700K) up and down lighting. Featuring a wireless, rechargeable design with an integrated motion sensor and IP44 weather resistance, these lights are ideal for enhancing the ambiance and security of your outdoor spaces.

Safety Instructions

• Always handle the product with care.
• Do not attempt to disassemble or modify the product. This may void the warranty and pose a safety risk.
• Ensure the charging port is dry before connecting the USB-C cable.
• Keep the product away from extreme temperatures, direct sunlight for prolonged periods, and open flames.
• Dispose of batteries and electronic components according to local regulations.
• This product is rated IP44 for outdoor use, meaning it is protected against splashing water from any direction. However, it should not be submerged in water.
• Do not stare directly into the LED light source.

Package Contents

Verify that all items listed below are present and in good condition:

• 4x Calex Falerna Rechargeable Outdoor Wall Lights
• 1x Remote Control
• 4x USB-C Charging Cables (1.5m each)
• 4x Magnetic Mounting Plates
• Mounting Accessories (screws, wall plugs)

Product Features

• Modern & Elegant Design: Clean cubic form with warm white (2700K) up and down lighting, suitable for various outdoor and indoor settings.
• Wireless & Rechargeable: Each light is equipped with a powerful 2000 mAh integrated rechargeable battery, offering up to 8 hours of illumination on a full 6-hour charge via USB-C.
• Smart Motion Sensor: Detects movement within 2 to 5 meters at a 90° angle, automatically activating the light for 30 seconds.
• Weather-Resistant & Durable: IP44 rating ensures protection against splashing water, making it ideal for exterior walls, fences, porches, and facades.
• Quick & Easy Installation: Features a magnetic mounting plate for tool-free installation in minutes, perfect for temporary setups or renters.

Setup and Installation

The Calex Falerna wall lights are designed for quick and easy installation without the need for drilling, thanks to their magnetic mounting system. For permanent installation, screws are provided.

Magnetic Installation (Drill-Free)

1. Identify the desired location for your wall light. Ensure the surface is clean and dry.
2. Peel off the protective film from the adhesive backing of the magnetic mounting plate.
3. Firmly press the magnetic mounting plate onto the chosen surface. Hold for 30 seconds to ensure strong adhesion.
4. Align the back of the wall light with the mounted plate. The magnets will securely attach the light to the plate.

Screw Installation (Permanent)

1. Identify the desired location for your wall light.
2. Place the magnetic mounting plate against the wall and mark the positions for drilling.
3. Drill holes at the marked positions and insert the provided wall plugs.
4. Secure the magnetic mounting plate to the wall using the provided screws.
5. Align the back of the wall light with the mounted plate. The magnets will securely attach the light to the plate.

Operating Instructions

Your Calex Falerna wall lights can be operated using the included remote control or the buttons on the back of each unit.

Using the Remote Control

The remote control allows for convenient operation of multiple lights simultaneously.

• ON/OFF: Press the 'ON' button to turn the lights on, and 'OFF' to turn them off.
• Brightness Adjustment: Use the '+' and '-' buttons to increase or decrease the light intensity.
• Timer Function: Press 'TIMER 1H' for the lights to stay on for 1 hour, or 'TIMER 2H' for 2 hours. After the set time, the lights will turn off automatically.
• Mode Selection: The 'MODE' button cycles through different operating modes, including motion sensor mode and continuous on.

Using the Integrated Motion Sensor

In motion sensor mode, the lights will automatically activate when movement is detected.

• Ensure the light is in motion sensor mode (refer to remote control 'MODE' button or unit's manual button).
• The sensor detects movement between 2 and 5 meters with a 90° detection angle.
• Once activated, the light will stay on for approximately 30 seconds before turning off if no further movement is detected.

Charging

Each Calex Falerna wall light is equipped with an integrated 2000 mAh rechargeable battery.

1. Locate the USB-C charging port on the light unit.
2. Connect one end of the provided USB-C cable to the light's charging port.
3. Connect the other end of the USB-C cable to a standard USB power adapter (not included) or a powered USB port.
4. A full charge takes approximately 6 hours and provides up to 8 hours of illumination, depending on brightness settings and motion sensor activity.
5. It is recommended to fully charge the lights before first use.

Maintenance

• Cleaning: Wipe the lights with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Battery Care: To prolong battery life, avoid completely draining the battery frequently. If storing the lights for an extended period, charge them to about 50% and recharge every few months.
• Inspection: Periodically check the mounting plates and the lights for any signs of wear or damage.

Troubleshooting

Specifications

Warranty and Support

Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or spare parts inquiries, please contact CALEX customer service directly or refer to the retailer where the product was purchased.

Please retain your proof of purchase for any warranty-related requests.