NICECNC Front Lighting Kit for Yamaha Tenere 700 (2019-2024)

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your NICECNC Front Lighting Kit. This kit is designed to enhance visibility and safety for your Yamaha Tenere 700 / XTZ700 motorcycle models from 2019 to 2024. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

2. Safety Information

• Always wear appropriate safety gear, including eye protection, during installation.
• Ensure the motorcycle's ignition is off and the battery is disconnected before beginning any electrical work.
• If you are unsure about any step of the installation process, consult a qualified motorcycle technician.
• Do not modify the product in any way, as this may void the warranty and create safety hazards.
• Ensure all connections are secure and properly insulated to prevent short circuits.

3. Package Contents

Verify that all components are present before proceeding with installation:

• 1x Front Lighting Kit (includes 2 light units)
• Mounting Brackets (Stainless Steel)
• Necessary Fasteners

Figure 3.1: Overview of the NICECNC Front Lighting Kit, showing the two light units and associated wiring.

4. Setup and Installation

This lighting kit is compatible with Yamaha Tenere 700 / XTZ700 models from 2019-2024. Follow these steps for proper installation:

1. Prepare the Motorcycle: Ensure the motorcycle is stable and the engine is off. Disconnect the battery's negative terminal.
2. Identify Mounting Location: The kit is designed for front mounting, typically near the handlebars or existing accessory points.
3. Attach Mounting Brackets: Secure the stainless steel mounting brackets to the desired location on your motorcycle. The multi-angle adjustable bracket allows for precise positioning of the light beam.

Figure 4.1: The adjustable bracket allows for easy modification of the light beam direction.

4. Mount the Lights: Attach the NICECNC light units to the installed brackets using the provided fasteners. Ensure they are securely fastened but allow for minor adjustments if needed.
5. Wiring: Connect the wiring harness from the lights to your motorcycle's electrical system. Refer to your motorcycle's service manual for specific wiring diagrams if necessary. The bracket is designed for easy operation, often fixed near the handle for convenient access.
6. Final Adjustments: Once wired, reconnect the battery. Turn on the motorcycle and test the lights. Adjust the angle of the lights using the adjustable brackets to achieve the desired beam direction and coverage.

Figure 4.2: The lighting kit installed, demonstrating both yellow and white light output for optimal visibility.

5. Operating Instructions

The NICECNC Front Lighting Kit provides powerful illumination for various riding conditions.

• Power On/Off: The lights are typically controlled via a switch integrated into your motorcycle's electrical system, often mounted near the handlebars for easy access.
• Light Modes: The lights feature both yellow and white light options. The 3030 LED chips provide 2000 lumens of bright light. The white light operates at 5500K, while the yellow light operates at 3000K. The specific method for switching between yellow and white light depends on your wiring setup (e.g., separate switches, integrated switch with multiple positions).
• Beam Performance: The flood beam design offers a wide irradiation area, allowing for a broader field of view and improved visibility, especially in challenging conditions.

Figure 5.1: Key specifications of the LED chips, including color temperature, lumen output, and power.

6. Maintenance

The NICECNC Front Lighting Kit is designed for durability and requires minimal maintenance.

• Cleaning: Periodically clean the convex lenses with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens surface.
• Inspection: Regularly check all mounting bolts and electrical connections to ensure they remain secure.
• Durability: The lights feature a die-cast rust-proof aluminum housing and impact-resistant convex lenses, providing heavy-duty performance and protection against environmental elements. The IP67 waterproof rating ensures effective resistance to extreme weather conditions.
• Lifespan: The LED chips are designed for an extended service life of 50,000+ hours.

Figure 6.1: Illustration of the robust construction, including 3030 LED chips, convex lens, and aluminum housing.

Figure 6.2: The IP67 waterproof rating ensures the lights can withstand challenging weather conditions.

Figure 6.3: The lights are designed for an extended service life of over 50,000 hours.

7. Troubleshooting

If you encounter issues with your lighting kit, consider the following common troubleshooting steps:

• Lights Not Turning On:
  • Check all electrical connections for looseness or corrosion.
  • Verify that the motorcycle's battery has sufficient charge.
  • Inspect any fuses in the wiring circuit.
• Intermittent Operation:
  • Ensure all wiring is securely connected and not exposed to excessive vibration.
  • Check for any damage to the wiring insulation.
• Dim or Uneven Light Output:
  • Clean the lens surface to remove any dirt or film.
  • Verify that the power supply to the lights is stable (12V-24V).

If these steps do not resolve the issue, it is recommended to consult a professional motorcycle technician.

8. Specifications

Figure 8.1: Detailed dimensions of the NICECNC Front Lighting Kit.

9. Warranty and Support

For warranty information or technical support, please contact NICECNC customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

Legal Disclaimer: ARCFOX parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Polaris, Can-am, Arctic Cat, Ski-Doo, Beta, GASGAS, Sherco, etc.