1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Flieks Twin Platform Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use damaged parts.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Tighten all bolts and screws securely. Periodically check and re-tighten as needed.
- Do not exceed the maximum weight capacity of 350 lbs (158 kg).
- Keep small parts away from children during assembly to prevent choking hazards.
- Use only the recommended mattress thickness of 6 inches.
- Ensure electrical connections for the charging station and LED lights are properly installed and maintained. Do not overload the charging station.
3. Package Contents
Your Flieks Twin Platform Bed is shipped in 2 packages. Verify that all components listed below are present before starting assembly.
Hardware List:
- Bolts (various sizes)
- Screws (various sizes)
- Washers
- Allen Wrench
- Other fasteners as specified in the assembly diagram.
Component List:
- Headboard (Upholstered with LED)
- Bed Frame Side Rails
- Bed Frame End Rails
- Storage Shelves (various pieces)
- Desk Components
- Drawer Components (2 drawers)
- Bed Slats (10 pieces)
- Charging Station Unit
- Assembly Manual
Refer to the included assembly diagram for specific part identification and quantities.
4. Assembly Instructions
Assembly typically requires two adults. Follow the steps sequentially for proper construction.
Step 1: Prepare the Area and Unpack
Clear a spacious area for assembly. Lay out all components and hardware on a soft, clean surface to prevent damage.
Image 1: Assembled Flieks Twin Platform Bed. This image provides an overview of the final product, showcasing the integrated storage shelves, desk, and LED-lit upholstered headboard.
Step 2: Assemble the Headboard and Storage Shelves
Attach the upholstered headboard to the main storage shelf unit. Secure all connections using the provided bolts and an Allen wrench. Ensure the LED strip and charging station wiring are accessible for later connection.
Image 2: Detail of the LED-lit upholstered headboard. This image highlights the padded headboard and the LED lighting strip within the upper shelf compartment.
Step 3: Construct the Bed Frame
Connect the side rails and end rails to form the main bed frame. Ensure all joints are flush and securely fastened. Do not fully tighten bolts until all frame components are aligned.
Step 4: Install the Desk Unit
Attach the desk components to the designated side of the bed frame and storage unit. Follow the specific diagrams for proper orientation and secure attachment.
Image 3: Integrated desk and side storage. This image illustrates the pull-out desk feature and the additional shelving located at the foot of the bed.
Step 5: Insert Bed Slats
Place the 10 bed slats across the bed frame. Secure them according to the instructions, typically by screwing them into the side rails. This provides support for the mattress.
Step 6: Assemble and Install Drawers
Assemble the two under-bed drawers following the provided diagrams. Once assembled, slide them into their designated compartments beneath the bed frame.
Image 4: Under-bed storage drawer. This image shows one of the two drawers fully extended, demonstrating the available storage capacity.
Step 7: Connect Charging Station and LED Lights
Carefully connect the charging station and LED light power cables to a suitable power outlet. Ensure all connections are secure and routed safely to avoid tripping hazards.
Image 5: Integrated charging station. This image provides a detailed view of the charging station, featuring two standard power outlets and two USB ports for electronic devices.
Step 8: Final Tightening and Inspection
Once all components are assembled, go back and fully tighten all bolts and screws. Inspect the entire bed for stability and ensure there are no loose parts. Place your mattress on the bed.
5. Operating Instructions
5.1 LED Lighting
The LED lights integrated into the headboard storage shelves can be controlled via a switch or remote (if included). Refer to the specific LED controller instructions for color changes, brightness adjustments, and mode selections.
5.2 Charging Station
The charging station provides 2 standard plug outlets and 2 USB ports. Plug your electronic devices directly into these ports for convenient charging. Do not exceed the maximum power rating of the charging station.
5.3 Storage Drawers and Shelves
The two under-bed drawers and eight integrated storage shelves are designed for organizing personal items, books, and small electronics. Ensure items are placed securely to prevent them from falling or obstructing drawer movement.
5.4 Integrated Desk
The desk at the end of the bed can be used as a workspace or an additional shelf. Ensure the desk is stable before placing heavy items on it or using it for tasks requiring pressure.
6. Maintenance
- Cleaning: Wipe wood surfaces with a soft, damp cloth. Avoid harsh chemicals. For the upholstered headboard, spot clean with a mild fabric cleaner as needed.
- Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- Electrical Components: Ensure the charging station and LED wiring are free from damage. If any damage is observed, discontinue use and contact customer support.
- Weight Distribution: Distribute weight evenly on the bed and shelves to prevent stress on the frame.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly after assembly. | Loose hardware. | Check and tighten all bolts and screws. Ensure all components are correctly aligned. |
| Drawers do not slide smoothly. | Misaligned drawer slides or obstruction. | Verify drawer slides are correctly installed and aligned. Check for any items obstructing the drawer path. |
| LED lights not working. | Power connection issue or faulty LED strip. | Ensure the power adapter is securely plugged into an active outlet. Check the LED controller for proper connection. If issues persist, contact support. |
| Charging station not providing power. | Power connection issue or overloaded circuit. | Verify the charging station is plugged into a live outlet. Ensure the total power draw of connected devices does not exceed the station's rating. Try a different outlet. |
8. Specifications
- Model: N7090001046K-MZJ
- Brand: Flieks
- Material: Pine Wood, MDF, Linen
- Size: Twin
- Overall Product Dimension: 98.4''L x 50.1''W x 40.4''H
- Twin Bed Dimensions: 75.4'' x 39.2''
- Total Height: 40.4''
- Number of Bed Slats: 10
- Recommended Mattress Thickness: 6''
- Overall Product Weight: 178 lbs
- Bed Weight Capacity: 350 lbs
- Number of Packages: 2
- Assembly Required: Yes
- Origin: Vietnam
- Special Features: Upholstered Headboard, LED Lighting, 8 Storage Shelves, 2 Under-bed Drawers, Integrated Charging Station (2 AC outlets, 2 USB ports), Integrated Desk.
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, missing parts, or any questions regarding your Flieks Twin Platform Bed, please contact Flieks customer service through your purchase platform or the official brand website.
Please have your model number (N7090001046K-MZJ) and purchase date ready when contacting support.
