Introduction
Thank you for choosing the SR SUN RISE Floor Mount Bathtub Faucet. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new faucet. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Setup and Installation
Before installation, ensure all necessary components are present and that you have the required tools. Professional installation is recommended for optimal performance and safety.
Included Components
The package includes:
- Bathtub Faucet Body
- Brass Tube
- Handheld Sprayer
- 59 Inch Shower Hose
- Hot and Cold Water Supply Lines (G 1/2" threaded)
- Base Cover
- Mounting Hardware (including G 1/2" to G 3/8" threaded adapter and 8-inch extension hoses)
- Installation Instructions
Figure 1: All included components for installation.
Installation Steps (4-Step Process)
Follow these steps for a straightforward installation:
- Mark & Drill Holes: Position the faucet base on the floor where it will be installed. Use a marker to accurately mark the drilling points for the mounting hardware. Drill the necessary holes according to the provided template.
- Assemble the Faucet: Connect the main faucet body to the brass tube. Ensure all connections are secure.
- Secure the Faucet: Insert the faucet assembly into the drilled holes. Secure the base to the floor using the provided mounting hardware. Ensure the faucet is stable and level.
- Install the Handheld Shower: Connect the 59-inch shower hose to the handheld sprayer and the faucet body. Ensure all connections are hand-tightened to prevent leaks. Do not use a wrench to overtighten connections involving O-rings, as this can cause damage and leaks.
Figure 2: Visual guide for the 4-step installation process.
Figure 3: Faucet dimensions and important note on connection tightening.
Operating Instructions
Your SR SUN RISE bathtub faucet is designed for ease of use and versatility.
Water Flow and Temperature Control
The faucet features a single handle for controlling both water flow and temperature. Lift the handle to increase flow and move it left for hot water or right for cold water. The dual ceramic valve cartridge ensures precise control and durability.
Figure 4: Hot & Cold Balance Valve for temperature control.
360° Swivel Spout
The main spout can swivel 360 degrees, allowing for flexible positioning and easy filling of bathtubs or other containers. This feature is particularly useful for directing water flow precisely where needed.
Figure 5: The 360° swivel spout in use.
3-Function Handheld Shower Head
The handheld shower head offers three distinct spray settings for various needs:
- Massage Spray: A focused, invigorating spray.
- Powerful Cleaning: A strong, concentrated stream ideal for rinsing the tub.
- Powerful Full Body Spray: A broad, consistent spray for general showering or rinsing.
Figure 6: Three spray settings of the handheld shower head.
Maintenance
Proper care and maintenance will ensure the longevity and appearance of your SR SUN RISE faucet.
Cleaning the Faucet
To maintain the brushed nickel finish, clean regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. For stubborn water spots, a mild soap solution can be used, followed by rinsing and drying.
Checking Connections
Periodically inspect all connections for any signs of leaks. If a leak is detected, gently tighten the connection. Remember not to overtighten, especially where O-rings are present, to prevent damage.
Aerator Maintenance
If water flow from the spout decreases, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris or mineral deposits, and then reattach it securely.
Figure 7: Non-splashing mesh outlet and solid brass construction.
Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or supply lines. | Clean the aerator. Check supply lines for kinks or obstructions. Ensure water shut-off valves are fully open. |
| Leaks at Connections | Loose connections or damaged O-rings. | Gently tighten connections. If leaks persist, check O-rings for damage and replace if necessary. Avoid overtightening. |
| Water Temperature Issues | Improper hot/cold supply connection or issue with valve cartridge. | Verify hot and cold supply lines are correctly connected. If problem persists, contact customer support. |
| Handheld Shower Not Working | Hose kinked or sprayer clogged. | Check the shower hose for kinks. Clean the spray nozzles on the handheld shower head. |
Specifications
Key technical details for the SR SUN RISE Floor Mount Bathtub Faucet.
| Feature | Detail |
|---|---|
| Brand | SR SUN RISE |
| Model Number | TJYG004 |
| Color | Brushed Nickel |
| Material | Solid Brass (faucet body), 304 Stainless Steel (supply lines, shower hose) |
| Finish Type | Brushed |
| Number of Handles | 1 |
| Mounting Type | Floor Mount |
| Handheld Shower Functions | 3 (Massage, Powerful Cleaning, Full Body Spray) |
| Shower Hose Length | 59 inches |
| Valve Type | Dual Ceramic Valve Cartridge (tested over 150,000 cycles) |
| Water Flow Rate | 4 GPM (Gallons Per Minute) |
| Certifications | CEC & DOE certified |
Figure 8: High-temperature resistant 304 stainless steel hose.
Warranty Information
SR SUN RISE provides a 10-year support for this product. This warranty covers any product quality problems that may arise under normal use and service. Please retain your proof of purchase for warranty claims.
Customer Support
If you have any questions, require assistance with installation, or need to make a warranty claim, please do not hesitate to contact our customer service team. Our 24/7 online customer service team is available to provide support.
For contact information, please refer to the SR SUN RISE official website or the contact details provided with your purchase documentation.