Introduction
Thank you for choosing the ChunHee Dog Training Bell. This device is designed to facilitate communication between you and your dog, helping to signal when they need to go outside for potty breaks or play. By using this manual, you will learn how to set up, operate, and maintain your training bell for optimal performance and a positive training experience.
Product Overview
The ChunHee Dog Training Bell features a large, easy-to-press button, adjustable volume, and multiple sound options, including voice commands. It is designed to be chew-proof and durable for long-term use.
Image: The ChunHee Dog Training Bell, showing a dog's paw interacting with the large button featuring a paw print design.
Key Features:
- Adjustable Volume: 0-115dB with 5 levels.
- 28 Custom Sounds: Includes tones, ringtones, and voice commands.
- Chew-Proof Design: Durable construction for longevity.
- Easy Installation: No tools required, uses adhesive mounting.
- Long Battery Life: Operates on 2 AAA batteries (included).
Image: A visual comparison highlighting the features of the ChunHee Smart Dog Door Bell, such as adjustable volume, multiple ringtones, and smooth surface, against limitations of traditional dog doorbells.
Setup
1. Battery Installation
- Twist the base of the doorbell counter-clockwise to open the back cover.
- Insert 2 AAA batteries into the battery compartment, ensuring correct polarity (+/-).
- Replace the back cover by twisting it clockwise until secure.
Image: Step-by-step guide for battery replacement, showing how to open the back cover, insert AAA batteries, and secure the cover.
2. Mounting the Bell
The ChunHee Dog Training Bell can be mounted on various surfaces using the included adhesive tape. Choose a location easily accessible by your dog, such as near a door or on a wall.
- Clean the desired surface thoroughly to ensure proper adhesion.
- Peel off the protective film from one side of the non-marking double-sided adhesive tape and apply it to the back of the bell.
- Peel off the remaining protective film and firmly press the bell onto the chosen surface for at least 30 seconds.
Image: Illustration of quick installation, showing the bell being mounted on a door, with options for wall or floor placement.
3. Adjusting Volume and Sound
- Volume Control: Press the volume button (speaker icon) on the side of the bell to cycle through 5 volume levels (0-115dB).
- Sound Selection: Press the music note button on the side to cycle through the 28 available tones, ringtones, and voice commands. Choose a sound that is distinct and easily recognizable by your dog.
Image: The dog training bell demonstrating its 5-level volume adjustment capability, suitable for various home environments.
Operating and Training Guide
Effective training requires consistency and positive reinforcement. Follow these steps to teach your dog to use the ChunHee Dog Training Bell:
- Step 1: Introduce the Doorbell
Let your dog explore the bell. Treat and reward any interest they show. Ensure they are comfortable with the sound it makes.
- Step 2: Teach to Touch
Cut treats into small pieces. When your dog touches the bell (even accidentally), say "Touch!" then "Yes!" and reward with a treat. You can also gently guide their paw to touch the bell.
- Step 3: Teach When to Ring
Before opening the door to go outside, ask your dog to touch the bell. Say "Yes!" and treat them. Repeat this every time you go out. Treat them again after they potty outside.
- Step 4: Be Patient
If your dog rings the bell to play, praise and treat them. If they ring for potty, praise and treat, then immediately take them outside. If they don't need to go, gently guide them back inside. They will learn the bell means potty time when it consistently leads to going outside for that purpose.
Image: A visual representation of the four-step training process: Introduce, Teach to Touch, Teach When to Ring, and Be Patient.
Tips for Success:
- Consistency is Key: Always respond to the bell and follow through with the intended action (e.g., going outside).
- Positive Reinforcement: Use treats, praise, and affection to reward desired behavior.
- Placement: Ensure the bell is placed at a height easily accessible by your dog's paw or nose.
- Voice Commands: Utilize the voice command options (e.g., "outside," "potty") to reinforce the meaning of the bell.
Image: The dog training bell's sensitive trigger and large touch area, making it easy for dogs to activate with a paw, nose, or tongue.
Maintenance
Battery Replacement
The training bell uses 2 AAA batteries. When the sound becomes faint or the bell stops responding, it's time to replace the batteries. Follow the steps outlined in the "Setup" section for battery installation.
Cleaning
Wipe the surface of the bell with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the bell is completely dry before re-use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bell does not ring. | Low or dead batteries. Incorrect battery installation. | Replace batteries with fresh AAA batteries. Ensure batteries are inserted with correct polarity. |
| Sound is too quiet or too loud. | Volume setting is not optimal. | Press the volume button to adjust to a suitable level. |
| Dog is not using the bell. | Insufficient training or inconsistent reinforcement. Bell placement is inconvenient. | Review the "Operating and Training Guide" and practice consistently. Ensure the bell is easily accessible to your dog. |
| Bell falls off the wall/door. | Surface was not clean before adhesion. Adhesive tape is worn. | Clean the surface thoroughly and reapply with new strong double-sided adhesive tape. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | CB10-WH/BU |
| Item Weight | 4.2 ounces |
| Dimensions (L x W x H) | 4.41 x 3.66 x 1.26 inches (Package) |
| Batteries | 2 AAA batteries (included) |
| Volume Range | 0-115dB (5 levels) |
| Number of Sounds | 28 (tones, ringtones, voice commands) |
| Included Components | 1 x Dog Button, 1 x Non-marking Double Sided Adhesive Tape, 1 x User Manual, 2 x AAA Battery |
| Manufacturer | ChunHee |
Warranty and Support
Warranty Information
This ChunHee Dog Training Bell is covered by a 1-Year Manufacturer Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Customer Support
For any questions, concerns, or technical assistance regarding your ChunHee Dog Training Bell, please contact our customer support team. Refer to the contact information provided with your purchase or visit the official ChunHee website for support details.
