NUU GARDEN 31.5-inch Square Outdoor Dining Table

1. Introduction and Safety Information

This manual provides essential instructions for the assembly, operation, and maintenance of your NUU GARDEN 31.5-inch Square Outdoor Dining Table. Please read all instructions carefully before assembly and use to ensure safe and proper operation.

Important Safety Warnings:

• Do not overload the table. The maximum weight recommendation is 180 pounds (81.6 kg). Exceeding this limit may cause damage to the table or result in injury.
• Keep children away from the table's edges to prevent injury. Rounded edges are designed for safety, but supervision is always recommended.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Place the table on a flat, stable surface to prevent tipping.
• Avoid placing hot items directly on the tempered glass surface without protective mats to prevent thermal shock, although the glass is designed to be durable.
• Do not stand or sit on the table.

2. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Tabletop (Tempered Glass)
• Table Legs (Iron Frame)
• Assembly Guide
• Installation Tool (Wrench/Hex Key)
• Hardware Pack (Bolts, Washers, Nuts)

3. Assembly Instructions

Follow these steps to assemble your NUU GARDEN outdoor dining table. It is recommended to assemble the table on a soft, clean surface to prevent scratches.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Check against the package contents list.
2. Attach Legs to Frame: Identify the table frame and the four legs. Align each leg with the designated attachment points on the frame. Secure them using the provided bolts and washers.
   

   Figure 3.1: Illustration of the table's stable and safe design, including reinforced stability in the frame.
3. Secure Crossbars/Support: If your model includes crossbars or additional support structures between the legs, attach them now using the appropriate hardware. Ensure they are aligned correctly for stability.
4. Attach Tabletop: Carefully place the tempered glass tabletop onto the assembled frame. Ensure it is centered and aligned with the pre-drilled holes or suction cups (if applicable). Secure the tabletop using the remaining hardware. Do not overtighten.
5. Insert Umbrella Hole Cover: If not using an umbrella, insert the provided cover into the umbrella hole to protect it from debris.
   

   Figure 3.2: Detail of the umbrella hole and its protective cover.

6. Final Check: Once assembled, gently shake the table to ensure it is stable. Re-tighten any loose connections if necessary.

4. Operating Instructions

Using the Umbrella Hole:

Your NUU GARDEN dining table is equipped with a 1.7-inch diameter umbrella hole, suitable for most standard patio umbrellas. The fixed holder ensures the umbrella remains steady.

1. Remove the umbrella hole cover from the tabletop.
2. Insert the pole of your patio umbrella through the hole in the tabletop and into the fixed holder below.
3. Ensure the umbrella pole is seated firmly in the holder. Tighten any securing knobs on your umbrella pole or base if applicable.
4. Always close and secure your umbrella during strong winds or when not in use to prevent damage to the umbrella or table.

Figure 4.1: The 1.7-inch umbrella hole designed for standard patio umbrellas.

5. Maintenance

Proper care and maintenance will extend the life and appearance of your outdoor dining table.

Cleaning the Tempered Glass Tabletop:

• Wipe the glass surface with a soft, damp cloth and a mild soap solution.
• For streaks or smudges, use a glass cleaner and a lint-free cloth.
• Avoid abrasive cleaners or scouring pads, which can scratch the glass.
• Rinse thoroughly with clean water and dry immediately to prevent water spots.

Figure 5.1: The thickened tempered glass top is weather-resistant, scratch-resistant, and easy to clean.

Care for the Iron Frame:

• Clean the iron frame with a soft cloth and mild soap and water.
• Rinse thoroughly and dry completely to prevent rust.
• Inspect the frame periodically for any signs of rust or damage. Touch up any chips or scratches with rust-inhibiting paint if necessary.
• During prolonged periods of non-use or harsh weather conditions, consider covering the table or storing it indoors to protect it from the elements.

6. Troubleshooting

Refer to this section for common issues and their solutions.

7. Specifications

Detailed specifications for the NUU GARDEN 31.5-inch Square Outdoor Dining Table.

• Brand: NUU GARDEN
• Model Number: TA402-01
• Product Dimensions (D x W x H): 31.5 inches x 31.5 inches x 27.56 inches (80 cm x 80 cm x 70 cm)
• Item Weight: 23.8 Pounds (10.8 kg)
• Maximum Weight Recommendation: 180 Pounds (81.6 kg)
• Frame Material: Iron
• Top Material Type: Tempered Glass
• Color: Black (Frame), Clear (Tabletop)
• Shape: Square
• Umbrella Hole Diameter: 1.7 Inches (4.3 cm)
• Seating Capacity: 4 (Unextended)
• Required Assembly: Yes
• Indoor/Outdoor Usage: Indoor, Outdoor

Figure 7.1: Detailed dimensions of the NUU GARDEN 31.5-inch Square Outdoor Dining Table.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact NUU GARDEN customer service directly. Keep your purchase receipt for warranty claims.

NUU GARDEN Customer Service: Please visit the official NUU GARDEN website or contact your retailer for support options.