1. Introduction
Thank you for choosing the Adamson Hybrid 2-in-1 Analog & Digital Weighing Scale. This manual provides essential information for the safe and effective use of your new scale. Please read it thoroughly before operation and retain it for future reference.
Image 1.1: The Adamson Hybrid 2-in-1 Analog & Digital Weighing Scale, showcasing its sleek design and dual display.
2. Safety Information
- Always place the scale on a hard, flat, and stable surface. Uneven surfaces can affect accuracy.
- Do not use the scale on wet or slippery floors to prevent accidents.
- The scale features a tempered glass platform. Handle with care to avoid breakage. Do not drop or strike the scale.
- Keep the scale dry. Avoid contact with water or other liquids.
- Do not overload the scale beyond its maximum capacity of 400 lbs / 180 kg.
- This scale is intended for personal body weight measurement only.
- Keep batteries out of reach of children.
3. Package Contents
Please check the package for the following items:
- Adamson Hybrid 2-in-1 Analog & Digital Weighing Scale
- 3 x AAA Alkaline Batteries
- User Manual (this document)
4. Product Features
The Adamson Hybrid Scale combines advanced technology with user-friendly design:
- Dual Weight Measurement Display: Features both a digital LCD and an analog dial for clear readings.
- High Precision: Equipped with advanced GX Sensors for accurate measurements up to 396 lbs / 180 kg, with 0.2 lbs / 0.1 kg precision.
- Backlit Display: The digital display includes backlighting for easy readability in various lighting conditions.
- Extra-Wide Tempered Glass Platform: Designed for comfort and stability, accommodating larger foot sizes.
- Auto Calibration: Ensures consistent and accurate readings.
- Unit Conversion: Displays weight in both pounds (LB) and kilograms (KG).
Image 4.1: Key features of the Adamson Hybrid Scale, including its dual display, high capacity, and precision sensors.
Image 4.2: The large, backlit LCD display and analog dial for clear weight readings.
5. Setup
- Install Batteries: Open the battery compartment on the underside of the scale. Insert the 3 AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
- Placement: Place the scale on a hard, flat, and stable surface. Avoid carpets, rugs, or uneven flooring, as this can affect accuracy.
- Initial Calibration: For the first use or after moving the scale, gently step on the scale until the display activates, then step off. The scale will show "0.0" or a similar reading, indicating it is calibrating. Wait for it to turn off automatically. This process ensures accurate readings.
Image 5.1: Illustration of the scale's internal features and battery compartment location.
6. Operating Instructions
- Step On: Gently step onto the center of the scale with bare feet. Stand still and distribute your weight evenly.
- Read Measurement: The digital display will illuminate and show your weight. The analog dial will also indicate your weight simultaneously. The reading will flash a few times before settling.
- Step Off: Once your weight is displayed and stable, you can step off the scale. The scale will automatically turn off after a few seconds to conserve battery life.
For consistent results, it is recommended to weigh yourself at the same time each day, preferably in the morning before breakfast and after using the restroom.
Image 6.1: A user standing on the scale, demonstrating how to take a measurement.
7. Maintenance and Care
- Cleaning: Wipe the scale surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a cool, dry place. Avoid extreme temperatures and direct sunlight.
- Battery Replacement: If the display shows "Lo" or becomes dim, replace all three AAA batteries. Ensure proper polarity.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Display / "Lo" | Batteries are low or incorrectly installed. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Inaccurate Readings | Scale is on an uneven surface; initial calibration not performed; scale moved between measurements. | Place scale on a hard, flat surface. Perform initial calibration (step on, then off). Avoid moving the scale between uses. |
| "Err" Message | Scale overloaded. | Step off the scale. Ensure weight does not exceed 400 lbs / 180 kg. |
9. Specifications
- Model: Adamson Hybrid Scale
- Weight Capacity: 396 lbs / 180 kg
- Precision: 0.2 lbs / 0.1 kg
- Display Type: Dial pointer + LCD digital display (Backlit)
- Power Source: 3 x AAA Batteries (included)
- Product Dimensions: 15.35 x 11.81 x 1.26 inches
- Materials: Tempered Glass Platform
- Manufacturer: Adamson
10. Warranty and Support
Adamson provides a 5-year assurance for the Adamson Hybrid Bathroom Scale. We also offer exceptional lifetime customer support. If you encounter any issues or have questions, please contact our customer support team for assistance. We aim to address all inquiries within 24 hours.
For support, please visit the official Adamson store or contact the seller directly.
Visit the Adamson Store
