EasyKeys Replacement Key for Arctic Cat B71857 Instruction Manual

1. Introduction

This manual provides essential information for the proper identification and use of your EasyKeys B71857 replacement key. This key is specifically designed for Arctic Cat and Yamaha off-road vehicles and snowmobiles within the B70000 - B79897 key series. It is a custom-cut key, ensuring compatibility when the correct lock code is identified.

Image 1: The EasyKeys B71857 replacement key, designed for Arctic Cat and Yamaha vehicles. This key is custom-cut to match specific lock codes.

It is crucial to verify that your vehicle's lock code and manufacturer match the product specifications to ensure proper function. This key is cut on an X119 key blank.

2. Identifying Your Lock Code (Setup)

Before using your replacement key, you must accurately identify the lock code of your vehicle. The lock code is essential for ensuring the key's compatibility. Incorrect identification may result in the key not working or potentially damaging the lock.

The lock code can typically be found in one of the following locations:

• On the Original Key: If you still possess an original key, the code is often stamped directly on it.
• On the Lock Face: The code may be engraved or printed on the visible face of the lock cylinder.
• On a Label: Check for a label inside or behind the lock mechanism, or on the cabinet/door panel near the lock.

Image 2: Visual guide illustrating common locations for finding your lock code, including on the key, lock face, or on labels near the lock mechanism.

Important Note:

• Lock codes are manufacturer-specific. Always order by manufacturer.
• Key cuts differ even if codes appear similar across different brands. Ensure your key matches the Arctic Cat / Yamaha (GCODE) specification.

3. Operating Instructions

Once you have confirmed that your EasyKeys B71857 replacement key matches your vehicle's lock code and manufacturer, follow these steps for proper operation:

1. Insert the Key: Gently insert the key into the lock cylinder. Do not force the key if it does not slide in smoothly.
2. Turn the Key: Once fully inserted, turn the key clockwise or counter-clockwise as required to engage the lock mechanism.
3. Remove the Key: After operating the lock, return the key to its neutral position before gently pulling it out.

If the key does not turn or insert smoothly, refer to the Troubleshooting section.

4. Maintenance

Proper care of your replacement key will ensure its longevity and reliable performance:

• Keep Clean: Avoid exposing the key to excessive dirt, dust, or corrosive substances. Clean with a soft, dry cloth if necessary.
• Avoid Bending: Do not apply excessive force that could bend or damage the key blade.
• Storage: Store the key in a safe place where it will not be lost or damaged.

5. Troubleshooting

If you encounter issues with your EasyKeys B71857 replacement key, consider the following:

• Key Does Not Insert:
  • Ensure the key is oriented correctly.
  • Check for any obstructions in the lock cylinder.
  • Verify that the lock code on the key matches your vehicle's lock code.
• Key Inserts but Does Not Turn:
  • Confirm the lock code match. An incorrect code will prevent the key from turning.
  • The lock mechanism may be stiff or corroded. Apply a small amount of graphite lubricant to the lock cylinder.
  • The lock itself may be damaged or worn.
• Key Feels Loose or Wobbly:
  • This could indicate a worn lock cylinder or an incorrectly cut key. Double-check your lock code.

If problems persist after troubleshooting, contact EasyKeys customer support for further assistance.

6. Specifications

7. Warranty and Support

For any questions, concerns, or issues not covered in this manual, please contact EasyKeys customer support. While specific warranty details are not provided in this document, EasyKeys is committed to customer satisfaction. Please retain your purchase receipt for any support inquiries.

For support, visit the EasyKeys Store on Amazon or refer to your purchase documentation for direct contact information.