HyperX SoloCast 2 USB Condenser Microphone

1. Introduction

The HyperX SoloCast 2 is a compact USB condenser microphone designed for clear audio capture in various applications, including gaming, streaming, and content creation. It features a plug-and-play design for ease of use and integrates essential components for optimal performance.

Image: The HyperX SoloCast 2 USB Condenser Microphone in black, shown on its tiltable desktop stand.

2. Package Contents

Verify that all items are present in the package:

• HyperX SoloCast 2 USB Condenser Microphone
• Detachable Tiltable Stand
• USB-C to USB-A Cable
• Quick Start Guide (this manual)

3. Setup

3.1 Connecting the Microphone

1. Place the HyperX SoloCast 2 on a stable surface using its integrated tiltable stand, or attach it to a compatible mic arm using the built-in 3/8" or 5/8" threads.
2. Connect the USB-C end of the provided cable to the USB-C port on the back of the microphone.
3. Connect the USB-A end of the cable to an available USB-A port on your computer (PC or Mac).
4. The microphone is plug-and-play and should be automatically recognized by your operating system.

Image: The HyperX SoloCast 2 microphone connected to a laptop via its USB cable.

3.2 Software Installation (HyperX NGENUITY)

For advanced customization and access to audio filters, download and install the HyperX NGENUITY software from the official HyperX website. This software allows you to fine-tune microphone settings.

• Visit the official HyperX website.
• Navigate to the support or downloads section for the SoloCast 2.
• Download and install the HyperX NGENUITY software for your operating system (Windows PC required for initial DSP setup).

4. Operating Instructions

4.1 Basic Operation

• Tap-to-Mute with LED Indicator: The top of the microphone features a touch-sensitive mute button. Tap it to mute or unmute the microphone. A red LED indicator on the front of the microphone will illuminate when the microphone is active (live) and turn off when muted.


Image: Close-up of the HyperX SoloCast 2 showing the tap-to-mute area and the LED indicator for live (red) and muted (off) states.

• Tiltable Stand: The included stand allows you to tilt the microphone to adjust its angle, directing it towards your voice source for optimal sound capture.


Image: The HyperX SoloCast 2 shown in both upright and tilted positions on its stand.

• Cardioid Polar Pattern: The microphone utilizes a cardioid polar pattern, which primarily captures sound from the front while reducing pickup from the sides and rear. This is ideal for focused vocal recording, minimizing background noise.


Image: A visual representation of the cardioid polar pattern, showing the microphone's primary sound pickup direction.

• Internal Shock Mount & Pop Filter: The microphone is engineered with a built-in internal shock mount to reduce vibrations and an integrated foam pop filter to minimize plosive sounds, ensuring clearer audio.


Image: A detailed view of the internal shock mount mechanism within the HyperX SoloCast 2 microphone.



Image: An exploded diagram showing the built-in pop filter, internal shock mount, and tiltable stand components of the microphone.

• Mic Arm Mounting: For increased versatility, the microphone includes built-in 3/8" and 5/8" threads, allowing it to be easily mounted on compatible microphone arms.


Image: The HyperX SoloCast 2 microphone attached to a professional microphone arm, demonstrating its mounting capability.

4.2 Advanced Settings (HyperX NGENUITY Software)

The HyperX NGENUITY software provides access to various digital signal processing (DSP) features to enhance your audio:

• Mic Gain: Adjust the input sensitivity of the microphone.
• Frequency Filters: Apply High-Pass or Low-Pass filters to remove unwanted low or high-frequency sounds.
• Presence Boost: Enhance vocal clarity and presence.
• AI Noise Reduction: Reduce ambient background noise using artificial intelligence.
• Compressor: Control the dynamic range of your audio, making loud sounds quieter and quiet sounds louder for a more consistent output.
• Limiter: Prevent audio from exceeding a certain level, avoiding clipping and distortion.

Settings configured in NGENUITY are saved to the microphone's onboard memory, allowing them to persist even when connected to different devices.

5. Maintenance

To ensure the longevity and optimal performance of your HyperX SoloCast 2 microphone:

• Cleaning: Use a soft, dry cloth to wipe the exterior of the microphone. Avoid using harsh chemicals or abrasive materials.
• Storage: When not in use, store the microphone in a clean, dry environment away from extreme temperatures and direct sunlight.
• Handling: Handle the microphone with care to prevent physical damage. Although it has an internal shock mount, excessive force can still cause damage.

6. Troubleshooting

If you encounter issues with your HyperX SoloCast 2, try the following solutions:

• No Sound/Microphone Not Detected:
  • Ensure the USB cable is securely connected to both the microphone and your computer.
  • Try a different USB port on your computer.
  • Check your computer's sound settings to ensure the HyperX SoloCast 2 is selected as the default input device.
  • Verify the microphone is not muted (red LED should be illuminated).
  • Restart your computer.
• Poor Audio Quality/Background Noise:
  • Ensure the microphone is positioned correctly, facing you directly.
  • Adjust the microphone gain in your operating system's sound settings or via HyperX NGENUITY software.
  • Utilize the AI Noise Reduction and frequency filters in the HyperX NGENUITY software.
  • Minimize ambient noise in your recording environment.
• Tap-to-Mute Not Responding:
  • Ensure the microphone is properly connected and powered on.
  • Try disconnecting and reconnecting the USB cable.
  • If using HyperX NGENUITY, ensure the software is up-to-date.

7. Specifications

8. Warranty and Support

The HyperX SoloCast 2 USB Condenser Microphone comes with a manufacturer's warranty. For detailed warranty information, product support, and service inquiries, please visit the official HyperX support website or contact their customer service.

Online Support: www.hyperx.com/support