Introduction
Thank you for choosing the hygger Hang On Back Aquarium Filter. This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your new aquarium filter. Please read this manual carefully before use and retain it for future reference.
Product Features
- 6-Stage Filtration: Utilizes dual cartridges for biological, chemical, and physical filtration, effectively removing impurities, ammonia, nitrate, and odors.
- 3-in-1 Functionality: Provides filtration, water circulation, and oxygenation to create a healthy aquatic environment. The waterfall design enhances dissolved oxygen levels.
- Quiet Operation: Equipped with a premium motor and scientific structure for low-noise operation, ensuring a peaceful environment.
- Adjustable Water Flow: The flow rate is adjustable up to 132 GPH, allowing customization for different tank needs.
- Versatile Application: Suitable for 10-30 gallon freshwater and saltwater tanks with a tank thickness up to 1.1 inches.
- Easy Maintenance: Designed for straightforward cleaning and filter cartridge replacement.
What's in the Box
Your hygger Hang On Back Aquarium Filter package includes the following components:
- Hygger Hang On Back Aquarium Filter Unit (Model HUS-HG137)
- Water Inlet Tube (with extension pipe)
- Pre-filter Biochemical Sponge
- Filter Cartridges (2 pre-installed, 2 spare)
- Instruction Manual
Setup Instructions
- Assemble the Intake Tube: Connect the extension tube and pre-filter biochemical sponge to the main water inlet tube. Ensure all connections are tight.
- Install Filter Cartridges: The filter comes with two cartridges pre-installed. If replacing, ensure they are correctly seated in their compartments.
- Position the Filter: Hang the filter unit on the back of your aquarium. Ensure the intake tube is submerged in the water and the filter is stable. The rubber strut on the back helps keep the filter vertical and prevents overflow.
- Prime the Filter: IMPORTANT: Before plugging in the filter, fill the filter canister with water from your aquarium. This primes the pump and prevents dry running.
- Connect to Power: Once the filter is primed and properly positioned, plug the power cord into a suitable electrical outlet.
Video: Official hygger video demonstrating the setup and initial operation of the Hang On Back Aquarium Filter.
Operating Instructions
Once the filter is set up and plugged in, it will begin to draw water from the aquarium, pass it through the filtration media, and return clean, oxygenated water via the waterfall outlet.
- Adjusting Water Flow: The filter features an adjustable knob on the top of the unit. Turn this knob to increase or decrease the water flow rate according to your aquarium's needs and the fish species.
- Quiet Operation: The filter is designed for low noise. Ensure the water level in the tank is adequate to prevent splashing noises from the waterfall.
Maintenance
Regular maintenance is crucial for the optimal performance and longevity of your filter.
- Weekly Cleaning: Regularly clean the filter unit and its parts, including the intake tube and impeller, to prevent debris buildup.
- Filter Cartridge Replacement: Replace the filter cartridges every month. The package includes spare cartridges for convenience. You can also customize with other filter media as needed.
- Intake Sponge Replacement: Replace the intake sponge every 2 to 3 months to maintain effective pre-filtration.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Filter not starting/no water flow | Not primed with water; power not connected; impeller blocked. | Ensure filter is filled with water before plugging in. Check power connection. Clean impeller. |
| Reduced water flow | Clogged filter media; dirty impeller; intake tube blocked. | Clean or replace filter cartridges. Clean impeller. Clear any blockages in the intake tube. |
| Excessive noise | Low water level in tank; air in pump; impeller issue. | Ensure adequate water level. Prime filter fully to remove air. Check and clean impeller for any obstructions or damage. |
| Water bypassing filter media | Filter cartridges not seated correctly; water level too high in filter chamber. | Ensure filter cartridges are properly inserted. Adjust water flow if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | HUS-HG137 |
| Power | 5W |
| Flow Rate | 132 GPH (500 L/H) |
| Aquarium Size Compatibility | 10-30 Gallons |
| Tank Thickness | Within 1.1 inches |
| Dimensions (L x W x H) | 6.5" x 5.2" x 7.3" (without water inlet tube) |
| Water Inlet Tube Length | Adjustable (7.5" and 9.8" total length) |
| Filtration Stages | 6-Stage (Pre-filter sponge, biochemical sponge, micro-mesh cotton, activated carbon) |
| Spare Filter Cartridges Included | 2 Pcs |
Warranty & Support
The hygger Hang On Back Aquarium Filter (Model HUS-HG137) comes with a 2-year warranty from the date of purchase. For any problems during use or to claim warranty service, please contact hygger customer support. Refer to the contact information provided in the product packaging or on the official hygger website.
