1. Introduction
This manual provides essential instructions for the safe and efficient assembly, operation, and maintenance of your MERITLINE Full Murphy Bed with an integrated desk. Please read all instructions carefully before beginning assembly or using the product. Retain this manual for future reference.
2. Safety Information
Your safety is paramount. Adhere to the following guidelines to prevent injury or damage to the product:
- Always follow the assembly instructions carefully to ensure stability and safety of the unit.
- Exercise caution when folding and unfolding the bed mechanism to avoid injury from moving parts.
- Regularly inspect the bed for any signs of wear, loose hardware, or damage that could compromise its stability or safety. Tighten all fasteners as needed.
- Do not exceed the maximum weight capacity of 500 lbs for the bed.
- This product is designed for adults and is not intended for use by children under 6 years old.
- Ensure the bed is securely anchored to a wall as per assembly instructions to prevent tipping.

Image: Safety chain mechanism. This chain helps secure the bed in its upright position, preventing accidental deployment.
3. Setup and Assembly
The MERITLINE Full Murphy Bed with Desk requires assembly. An installation instruction manual with clear, logical illustrations is included with your product. Please follow these instructions precisely to ensure correct and safe assembly.
- Unpacking: Carefully unpack all components and verify against the parts list in the included manual.
- Tools: Gather all necessary tools as specified in the assembly manual (e.g., screwdrivers, wrenches).
- Assembly Steps: Follow the step-by-step instructions provided in the separate assembly manual. It is recommended to have at least two adults for assembly.
- Wall Anchoring: Ensure the unit is securely anchored to a sturdy wall stud using the provided hardware. This is critical for safety and stability.
Assembly typically takes approximately one hour. If you encounter any difficulties, refer to the troubleshooting section or contact customer service.
4. Operating Instructions
Your Murphy bed is designed for easy transition between a bed and a desk configuration. The smooth folding system allows for quick and effortless changes.
4.1. Converting to Bed Mode
- Clear the Desk: Remove all items from the integrated desk surface.
- Unlock Safety Mechanism: If a safety chain or latch is engaged, disengage it.
- Lower the Bed: Gently pull the bed frame downwards from the top. The gas lift mechanism will assist in a controlled descent. Guide the bed until it is fully extended and the support legs are deployed.
- Position Legs: Ensure the bed support legs are fully extended and stable on the floor.

Image: Murphy bed in fully extended bed mode, ready for use.
4.2. Converting to Desk Mode
- Clear the Bed: Remove any bedding or items from the mattress.
- Retract Legs: Fold the bed support legs inwards.
- Lift the Bed: Grasp the bed frame and gently lift it upwards. The gas lift mechanism will assist in raising the bed. Guide it smoothly until it is fully upright and secured against the wall.
- Engage Safety Mechanism: If applicable, engage the safety chain or latch to secure the bed in the upright position.
- Use the Desk: The integrated desk surface will now be accessible for use.

Image: Murphy bed in desk configuration, showing the integrated workspace.

Image: Murphy bed partially folded, illustrating the smooth transition between bed and desk modes.
5. Maintenance
Proper maintenance will extend the life and functionality of your Murphy bed.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the wood finish.
- Hardware Check: Periodically check all screws, bolts, and fasteners to ensure they are tight. Re-tighten as necessary.
- Mechanism Inspection: Inspect the folding mechanism and gas lifts for smooth operation. Do not lubricate unless specifically instructed by the manufacturer.
- Weight Distribution: Ensure weight is evenly distributed on the bed when in use.
6. Troubleshooting
If you encounter issues with your MERITLINE Murphy Bed, consider the following:
- Difficulty Folding/Unfolding:
- Ensure no obstructions are present (e.g., bedding, items on the desk).
- Check if all hardware is securely tightened. Loose connections can affect alignment.
- Verify the gas lift mechanism is functioning correctly. If it feels unusually stiff or weak, contact support.
- Squeaking Noises:
- Tighten all assembly bolts and screws.
- Ensure the bed is level and stable on the floor.
- Bed Not Staying Upright:
- Confirm the wall anchoring is secure and properly installed.
- Ensure the safety chain or latch is engaged.
For issues not resolved by these steps, please contact MERITLINE customer service.
7. Specifications
| Feature | Detail |
|---|---|
| Product Type | Murphy Bed with Desk |
| Size | Full |
| Color | White |
| Material | Plywood + MDF |
| Overall Dimensions (Closed) | 82.1" (H) × 60.6" (W) × 58.5" (D) |
| Overall Dimensions (Open) | Approx. 80.7" (L) |
| Desk Dimensions | Approx. 46.5" × 27.6" |
| Weight Capacity | 500 LBS |
| Recommended Mattress Thickness | Up to 8" |
| Assembly Required | Yes |
| Country of Origin | Vietnam |

Image: Dimensional drawing of the Murphy bed, showing height, width, and depth in both configurations.
8. Warranty and Support
Your MERITLINE Full Murphy Bed with Desk comes with a 12-month warranty from the date of purchase.
If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact our customer service team. We are committed to providing support and will respond to your inquiries within 24 hours.
For customer service, please refer to the contact information provided in your purchase documentation or on the MERITLINE official website.