maXpeedingrods Rear Trailer Hitch Receiver Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper installation, operation, and maintenance of your maXpeedingrods Rear Trailer Hitch Receiver, Model RY65GV. This product is designed to provide a secure towing point for your vehicle. Please read this manual thoroughly before installation and use to ensure safety and optimal performance.

2. Safety Information

WARNING:

• Always adhere to the Gross Trailer Weight (GTW) and Tongue Weight (TW) limits specified for this hitch and your vehicle. Never tow a trailer heavier than the lowest-rated towing component (hitch or vehicle).
• Ensure all fasteners are securely tightened before each use. Regularly inspect the hitch for any signs of wear, damage, or corrosion.
• Professional installation is recommended. If you are unsure about any step, consult a qualified mechanic.
• Wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
• Do not modify the hitch receiver in any way. Modifications can compromise its structural integrity and safety.
• Keep hands and clothing clear of moving parts during installation and operation.

3. Vehicle Fitment

This maXpeedingrods Rear Trailer Hitch Receiver (Model RY65GV) is specifically designed for:

• Jeep Grand Cherokee L 3-Row: Model years 2021, 2022, 2023, 2024, 2025.

Note: This hitch is NOT compatible with Jeep Grand Cherokee L 2-Row models.

4. Package Contents

Verify that all components listed below are present and undamaged before beginning installation.

Image 1: maXpeedingrods Rear Trailer Hitch Receiver and Hardware. This image displays the main hitch assembly along with all accompanying bolts, washers, nuts, and wire fish tools required for installation.

• 1x Rear Trailer Hitch Receiver Assembly
• Mounting Hardware Kit (bolts, washers, nuts, wire fish tools)

5. Setup and Installation

This hitch is designed for a vehicle-specific, bolt-on installation without the need for drilling or welding. However, some vehicle components may need to be temporarily removed or adjusted for access.

Tools Required (Not Included):

• Socket Wrench Set
• Torque Wrench
• Safety Glasses
• Gloves
• Vehicle Jack and Jack Stands (if lifting the vehicle is necessary)

General Installation Steps (Consult a professional if unsure):

1. Prepare Vehicle: Park the vehicle on a level surface, engage the parking brake, and allow the exhaust system to cool. If necessary, lift the vehicle using a jack and secure it with jack stands.
2. Clear Obstructions: Identify and temporarily remove any components (e.g., exhaust hangers, bumper fascia, underbody panels) that obstruct access to the frame mounting points. Refer to your vehicle's service manual for specific instructions.
3. Position Hitch: Carefully lift the hitch receiver into position, aligning the mounting holes on the hitch with the existing holes in the vehicle's frame. It may be helpful to have an assistant for this step.
4. Install Hardware: Use the provided hardware (bolts, washers, nuts) to secure the hitch to the frame. Utilize the wire fish tools if necessary to guide bolts through tight frame channels.
5. Tighten Fasteners: Hand-tighten all bolts first to ensure proper alignment. Then, using a torque wrench, tighten all fasteners to the torque specifications provided in your vehicle's service manual or the hitch manufacturer's specific instructions (if provided separately). Ensure even tightening.
6. Reinstall Components: Reinstall any vehicle components that were removed in Step 2.
7. Final Inspection: Double-check all fasteners for tightness and ensure the hitch is securely mounted and does not interfere with any vehicle components.

Image 2: Hitch Construction Details. This image illustrates the heavy-duty steel construction, powder-coated surface, and highlights that the design is vehicle-specific, requiring no drilling or welding for installation.

6. Operating Instructions

The maXpeedingrods Rear Trailer Hitch Receiver is designed to accept virtually any 2-inch x 2-inch shank accessory.

Image 3: Wide Application Examples. This image displays common uses for a 2-inch hitch receiver, including towing a trailer, carrying cargo with a cargo carrier, using weight distributing hitches, and attaching a bike carrier.

1. Attach Accessory: Insert the shank of your desired accessory (e.g., ball mount, cargo carrier, bike rack) into the 2-inch receiver opening.
2. Secure with Pin: Align the pinhole on the accessory shank with the pinhole on the hitch receiver. Insert a hitch pin (not included) and secure it with a clip or lock.
3. Verify Connection: Ensure the accessory is firmly seated and secured by the hitch pin. There should be minimal play.
4. Check Weight Limits: Always confirm that the combined weight of your trailer/cargo and its contents, along with the tongue weight, does not exceed the rated capacities of the hitch and your vehicle.
5. Safety Chains: When towing a trailer, always attach safety chains from the trailer to the designated chain loops on the hitch receiver.
6. Lighting Connections: If towing a trailer, ensure all trailer lighting is properly connected and functioning before driving.

7. Maintenance

Regular maintenance will ensure the longevity and safe operation of your hitch receiver.

• Routine Inspection: Before each use, inspect the hitch for any signs of rust, cracks, bends, or other damage. Check all bolts for tightness.
• Cleaning: Clean the hitch periodically with mild soap and water. Rinse thoroughly and dry to prevent rust.
• Corrosion Protection: The hitch features a black powder coating for corrosion resistance. If the coating is scratched or damaged, touch up with rust-inhibiting paint to prevent further corrosion.
• Lubrication: Apply a small amount of grease to the inside of the receiver tube to prevent rust and ease insertion of accessories.

Image 4: Salt Spray Test. This image shows a hitch component undergoing a salt spray test, indicating its high corrosion resistance and long service life.

8. Troubleshooting

If you encounter issues with your hitch receiver, consider the following:

• Loose Connection: If the hitch feels loose or rattles, re-check all mounting bolts and ensure they are torqued to specification.
• Difficulty Inserting Accessories: Ensure the receiver tube is clean and free of debris. A light application of grease can help. Check for any deformation of the receiver opening.
• Unusual Noises During Towing: Stop safely and inspect the hitch, trailer connection, and all associated hardware for any loose or damaged components.
• Rust or Corrosion: Address immediately by cleaning and applying rust-inhibiting paint to prevent further spread.

For persistent issues or concerns, contact maXpeedingrods customer support.

9. Specifications

Image 5: Key Specifications. This image visually presents the Class IV rating, 8,000 LBS Gross Trailer Weight (GTW), 1,200 LBS Tongue Weight (TW), and the 2-inch receiver size.

Note: All capacities are limited to the lowest-rated towing component (hitch or vehicle). Always refer to your vehicle's owner's manual for its specific towing capacity.

10. Warranty and Support

maXpeedingrods warrants its products against manufacturing defects under normal use for 1 year from the date of purchase. This warranty covers defects in materials and workmanship.

For technical support, warranty claims, or any questions regarding your maXpeedingrods Rear Trailer Hitch Receiver, please contact maXpeedingrods customer service. Please have your model number (RY65GV) and proof of purchase available when contacting support.

You can find contact information on the official maXpeedingrods website or through your point of purchase.