1. Safety Instructions
Please read all safety instructions carefully before using the appliance. Keep this manual for future reference.
- Ensure the power supply voltage matches the voltage indicated on the appliance.
- Do not immerse the motor unit, battery, or charger in water or other liquids.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not vacuum flammable or combustible materials, hot ashes, or sharp objects.
- This appliance is for household use only. Do not use outdoors or on wet surfaces unless specifically designed for it (e.g., mopping function).
- Supervise children to ensure they do not play with the appliance.
- If the power cord or plug is damaged, contact authorized technical support.
2. Product Components
Familiarize yourself with the components included with your Cecotec Conga Rockstar RX70 AquaPet Flex vacuum cleaner.
Image 2.1: The Cecotec Conga Rockstar RX70 AquaPet Flex cordless stick vacuum cleaner shown with its main body, extension tube, motorized brush, and various included accessories.
Image 2.2: A selection of accessories including the wall mount, upholstery brush, narrow nozzle, flexible hose, and pet grooming tool, designed for versatile cleaning.
Main Components:
- Motor Unit with Digital Display
- Removable Battery
- Extension Tube (with Flex joint)
- Motorized HairLess XL Brush with LED light
- ErgoWet Mopping Accessory
Included Accessories:
- Wall Mount
- Crevice Tool
- Upholstery Brush
- Flexible Hose
- Pet Grooming Brush
- Charger
3. Setup and Assembly
3.1 Initial Charging
- Before first use, fully charge the battery. Connect the charger to the battery or the vacuum cleaner directly.
- The digital display will show charging progress. A full charge typically takes several hours.
3.2 Assembling the Vacuum Cleaner
- Insert the extension tube into the motor unit until it clicks securely.
- Attach the motorized brush head to the other end of the extension tube, ensuring it clicks into place.
Image 3.1: The main vacuum unit fully assembled, showing the motor, extension tube, and motorized brush head.
3.3 Attaching Accessories
The vacuum can be used in handheld mode by attaching accessories directly to the motor unit, or with the extension tube for extended reach.
Image 3.2: The handheld motor unit configured with different attachments for specialized cleaning tasks, such as a crevice tool or upholstery brush.
- To attach an accessory, align it with the opening on the motor unit or extension tube and push until it locks.
- To remove, press the release button (if present) and pull the accessory off.
4. Operating Instructions
4.1 Powering On and Selecting Modes
- Press the power button on the motor unit to turn the vacuum on.
- Use the mode selection button to cycle through the available power modes: Eco, Medium, High, and Auto. The digital display will show the selected mode and remaining battery percentage.
- In Auto mode, the vacuum automatically adjusts suction power based on the detected dirt level, optimizing battery life.
Image 4.1: A close-up of the vacuum's handle and digital display, indicating battery level and current operating mode.
4.2 Vacuuming
The HairLess XL motorized brush is designed for effective cleaning on various floor types, including carpets and hard floors, and prevents hair tangles.
Image 4.2: A detailed view of the HairLess XL brush, highlighting its V-shaped design and integrated teeth for efficient hair collection and prevention of tangles.
- The integrated LED light on the brush head illuminates dark areas, making hidden dirt visible.
- The Flex Tube allows you to bend the extension tube to reach under furniture without bending down.
Image 4.3: A user demonstrating the flexibility of the vacuum's tube, allowing easy access to low areas under furniture.
4.3 Using the ErgoWet Mopping System
The ErgoWet system allows for simultaneous vacuuming and mopping.
- Fill the water tank of the ErgoWet accessory with clean water. You may add a small amount of neutral floor cleaner if desired.
- Attach the mop pad securely to the accessory.
- Attach the ErgoWet accessory to the motorized brush head.
- Proceed with vacuuming as usual. The system will simultaneously mop the floor.
Image 4.4: The vacuum cleaner equipped with the ErgoWet mopping accessory, ready for combined vacuuming and wet cleaning.
4.4 Using Pet Grooming Brush
The specialized pet grooming brush can be attached directly to the motor unit for grooming pets and collecting loose hair.
Image 4.5: A woman using the pet grooming brush attachment to gently remove loose hair from a dog, with the vacuum collecting the hair.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
5.1 Emptying the Dust Tank
- Ensure the vacuum is turned off and disconnected from the charger.
- Locate the dust tank release button and press it to detach the tank from the motor unit.
- Open the bottom lid of the dust tank and empty its contents into a waste bin.
- Close the lid and reattach the dust tank to the motor unit until it clicks.
5.2 Cleaning the Filters
The vacuum uses a HEPA filter system. Clean filters regularly to maintain suction power.
- Remove the dust tank. The filters are located inside.
- Carefully remove the pre-filter and HEPA filter.
- Tap the filters gently to remove dust. For thorough cleaning, rinse them under running water.
- Allow filters to air dry completely for at least 24 hours before reinserting them. Do not use a dryer or direct heat.
5.3 Cleaning the HairLess XL Brush
- Turn off the vacuum and detach the motorized brush head.
- Locate the brush roll release mechanism (usually a latch or screw) and remove the brush roll.
- Remove any tangled hair or debris from the brush roll. The V-shaped design and integrated teeth minimize tangles, but occasional cleaning is still recommended.
- Reinsert the brush roll and secure it.
5.4 ErgoWet Mopping Accessory Maintenance
- After each use, empty any remaining water from the tank.
- Remove and wash the mop pad. It can typically be hand-washed or machine-washed.
- Allow all components to air dry before storing.
6. Troubleshooting
If you encounter issues with your vacuum cleaner, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | Battery is not charged or not properly inserted. | Ensure battery is fully charged and correctly seated in the motor unit. |
| Reduced suction power | Dust tank is full, filters are clogged, or there is a blockage in the tube/brush. | Empty dust tank, clean filters, check for and remove any blockages. |
| Motorized brush not rotating | Brush roll is tangled with hair/debris or obstructed. | Turn off the vacuum, remove the brush roll, and clear any obstructions. |
| ErgoWet system not dispensing water | Water tank is empty or clogged. | Refill water tank. Check for any blockages in the water dispensing nozzles. |
| Unusual noise during operation | Foreign object caught in brush or tube, or motor issue. | Turn off and inspect brush and tube for foreign objects. If noise persists, contact customer support. |
7. Specifications
Key technical specifications for the Cecotec Conga Rockstar RX70 AquaPet Flex.
- Brand: Cecotec
- Model Name: Conga Rockstar RX70 AquaPet Flex
- Model Number: A01_EU01_115939
- Power: 780 W
- Suction Power: 300 AW (Air Watts)
- Suction Pressure: 30 kPa
- Battery: 33.6 V Max, 4000 mAh Pulsar Battery
- Runtime (Eco Mode): Up to 100 minutes (handheld), up to 70 minutes (motorized brush)
- Filter Type: HEPA Filter
- Special Features: Cordless, Flex Tube, LED Light, ErgoWet Mopping System, HairLess XL Brush
- Form Factor: Stick, Handheld
- Product Dimensions: 26 cm (L) x 12.5 cm (W) x 37 cm (H)
- Package Dimensions: 69.5 x 34.5 x 18.5 cm
- Weight: 2.08 kg
8. Warranty and Support
Your Cecotec Conga Rockstar RX70 AquaPet Flex comes with a manufacturer's warranty. Please refer to the warranty card included in the packaging for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact Cecotec customer support through their official website or the contact information provided in your product documentation.
Always provide your model number (A01_EU01_115939) and purchase date when contacting support.
