MOES NA503F

Download PDF
Contents

MOES 4-in-1 Gas & Carbon Monoxide Detector (Model NA503F) Instruction Manual

Model: NA503F | Brand: MOES

Introduction

This manual provides essential information for the safe and effective use of your MOES 4-in-1 Gas & Carbon Monoxide Detector. This device is designed to monitor for carbon monoxide (CO) and combustible gases (LPG/Natural Gas), while also displaying real-time temperature and humidity. Please read this manual thoroughly before installation and operation.

MOES 4-in-1 Gas & Carbon Monoxide Detector showing CO and gas detection from stove and fireplace

Image: The MOES 4-in-1 Gas & Carbon Monoxide Detector in operation, illustrating its ability to detect both CO and combustible gases like LPG/Propane/CH4 from sources such as gas cooktops and fireplaces. The device displays CO levels, gas levels, temperature, and humidity.

Important Safety Information

Failure to follow these safety instructions may result in property damage, injury, or death. This detector is not a substitute for proper installation and maintenance of fuel-burning appliances, including appropriate ventilation systems.

  • Installation Location: Install the detector in areas where gas or CO leaks are most likely to occur, such as kitchens, boiler rooms, and near fuel-burning appliances. Avoid installing near windows, doors, or ventilation openings that could interfere with detection.
  • Power Source: The device operates by plugging into a standard AC outlet. Ensure the outlet is functioning correctly and not controlled by a switch that could accidentally turn off power to the detector.
  • Alarm Response: If the alarm sounds, evacuate the premises immediately and contact emergency services or your gas provider. Do not re-enter until the area has been deemed safe by professionals.
  • Testing: Test the alarm regularly as described in the "Operating Instructions" section to ensure proper functionality.
  • Maintenance: Keep the detector clean and free from dust. Do not paint the device.
  • Temperature and Humidity: While the device displays temperature and humidity, these readings are for informational purposes and should not be used for critical environmental control.

Product Overview

The MOES 4-in-1 detector combines multiple sensing capabilities into a single, compact plug-in unit. It features a clear display and intuitive controls.

2-inch HD Color Screen Display comparison of MOES detector versus others

Image: A comparison highlighting the 2-inch HD color screen display of the MOES detector, showing clear visibility of CO ppm, gas levels, temperature, and humidity, contrasted with less clear displays of other devices.

Internal view of MOES detector showing electrochemical and catalytic combustion sensors

Image: An internal view of the detector, pointing out the Electrochemical Sensor for CO detection and the Catalytic Combustion Sensor for gas detection, emphasizing rapid response capabilities.

Components and Display

Detailed diagram of MOES detector components, display elements, and dimensions

Image: A detailed diagram illustrating the various components and display elements of the MOES detector, including the CO unit (PPM), GAS sensitivity, temperature value, humidity value, CO indicator, screen brightness keys, alert icon, sound indicator, CO value, GAS level, and disassembling button. The diagram also shows the dimensions of the device (105mm/4.13in height, 52mm/2.05in width).

  • Digital Display: Shows CO concentration (ppm), Gas concentration (%LEL), Temperature (°C/°F), and Humidity (%RH).
  • Alert Icon: Visual indicator for different alert levels (Green, Yellow, Orange, Red).
  • Sound Indicator: Indicates alarm status.
  • Control Buttons: For self-test, temperature unit toggle, screen brightness, and sound control.
  • Ventilation: Openings for air circulation to allow sensor operation.
  • Disassembling Button: For plug replacement or maintenance.

Setup and Installation

The MOES 4-in-1 detector is designed for simple plug-and-play installation.

  1. Unpack: Carefully remove the detector from its packaging.
  2. Choose Location: Select a suitable location for installation. Ideal locations include kitchens, utility rooms, near gas appliances, or areas where CO sources (e.g., fireplaces, furnaces) are present. Ensure the detector is plugged into a standard AC outlet that is not obstructed and is not controlled by a wall switch. Avoid placing it directly above heat sources, near windows, or in areas with high humidity (unless specifically for humidity monitoring).
  3. Plug In: Insert the detector directly into a standard electrical wall outlet. The device will power on automatically.
  4. Initial Warm-up: The detector may undergo an initial warm-up period upon first power-up. During this time, the display may show a countdown or specific indicators. Allow the device to complete this process before relying on its readings.
Expanded usage scenarios for MOES detector including fireplace, kitchen, smoking areas, garage, gas water heater, and RV

Image: Various usage scenarios demonstrating suitable placement for the detector, such as near a fireplace, in a kitchen, smoking areas, garage, near a gas water heater, or in an RV, to monitor for gas and CO.

Operating Instructions

The detector provides continuous monitoring and features several user-controlled functions.

Display Information

The 2-inch HD color screen displays the following in real-time:

  • CO PPM: Current Carbon Monoxide concentration in parts per million.
  • GAS S1: Current Combustible Gas concentration, indicated by a level bar.
  • Temperature: Current ambient temperature in Celsius or Fahrenheit.
  • Humidity: Current relative humidity percentage.

Button Functions

Detailed diagram of MOES detector button functions for temperature unit, self-test, screen brightness, screen inversion, and sound control

Image: A detailed diagram illustrating the functions of the control buttons on the MOES detector, including temperature unit switching, self-test, screen brightness adjustment, screen inversion, and sound control.

  • Temperature Unit Toggle: Long press the 'U' button to switch between Celsius (°C) and Fahrenheit (°F).
  • Self-Test: Short press the 'U' button to initiate a self-test. The alarm will sound briefly to confirm functionality.
  • Screen Brightness: The device has screen brightness keys. Pressing them cycles through three gears: 100% brightness (First Gear), 50% brightness (Second Gear), and 0% brightness (Third Gear, where the breathing light is also turned off).
  • Screen Inversion (180° Flip): Long press the bell icon button to flip the screen display 180 degrees for flexible viewing depending on outlet orientation.
  • Sound On/Off (Mute/Unmute): Short press the bell icon button to toggle the alarm sound on or off. Note: Muting the alarm should only be done temporarily during non-emergency situations, such as testing.

Alarm System Details

The detector features a dynamic 4-stage alert system for both CO and combustible gas, with visual and audible indicators.

Flowchart illustrating the 4 levels of visual and audible alarms for MOES detector

Image: A flow chart illustrating the four levels of visual and audible alarms for the MOES detector, detailing CO and Gas concentration thresholds for Good, Attention, Warning, and Danger states.

4-Stage Alert Levels
LevelCO ConcentrationGas ConcentrationIndicatorAudible Alarm
Green (Safe)< 50ppm< 5% LELGreen lightNo alarm
Yellow (Caution)51–100ppm5–8% LELYellow light flashesSlowly audible alarm
Orange (Warning)101–150ppm8–15% LELOrange light flashesAudible alarm
Red (Danger)150–999ppm>15% LELRed light flashesFast audible alarm (85dB)

The audible alarm intensifies in sound and frequency as gas or CO levels rise, providing a clear indication of increasing danger.

Maintenance

Regular maintenance ensures the longevity and accuracy of your detector.

  • Regular Testing: Perform a self-test weekly by short pressing the 'U' button. The alarm should sound briefly.
  • Cleaning: Gently wipe the exterior of the detector with a soft, damp cloth. Do not use cleaning agents, solvents, or abrasive materials. Ensure the ventilation openings are clear of dust and debris.
  • Avoid Obstruction: Ensure no objects block the detector's ventilation openings.
  • Do Not Paint: Painting the detector can clog the sensor openings and interfere with its ability to detect gas and CO.
  • Sensor Lifespan: Gas and CO sensors have a limited lifespan. Refer to the product specifications or manufacturer's recommendations for replacement intervals.

Troubleshooting

If you encounter issues with your MOES 4-in-1 detector, refer to the following common problems and solutions.

Troubleshooting Guide
ProblemPossible CauseSolution
Alarm sounds without apparent gas/CO leak.False alarm due to cooking fumes, aerosols, or temporary high concentrations. Sensor malfunction.Ventilate the area. If alarm persists, treat as a real emergency. If it's a recurring false alarm, relocate the detector or contact support.
Detector does not power on.No power to the outlet. Faulty outlet. Device malfunction.Check if the outlet is live by plugging in another device. Try a different outlet. If still no power, contact support.
Display shows "Err" or other error code.Sensor fault. Internal error.Unplug the device for 30 seconds and plug it back in. If the error persists, contact customer support.
Temperature/Humidity readings seem inaccurate.Placement near heat/cold sources. Sensor calibration.Ensure the detector is not placed in direct sunlight or near heating/cooling vents. These readings are for general information.
Alarm is too quiet or not sounding during self-test.Speaker obstruction. Device malfunction. Sound muted.Ensure the speaker is not blocked. Short press the bell icon button to unmute. If the issue persists, contact support.

Specifications

Product Specifications
FeatureDetail
Model NumberNA503F
Detection TypeCarbon Monoxide (CO), Combustible Gas (LPG/Natural Gas)
CO Detection Range0-999 ppm
Gas Detection Range0-20% LEL
Temperature Display Range14°F–122°F (-10°C–50°C)
Humidity Display Range0–95% RH
Alarm Loudness85dB (at 1 meter)
Power SourceAC Plug-in
Item Weight3.42 ounces (97 grams)
Package Dimensions4.21 x 2.4 x 2.13 inches
ManufacturerWENZHOU NOVA NEW ENERGY CO.,LTD

Warranty and Support

MOES products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official MOES website.

  • Warranty: This product typically comes with a limited manufacturer's warranty covering defects in materials and workmanship. The duration and terms of the warranty may vary.
  • Technical Support: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact MOES customer support.
  • Contact Information: Refer to the product packaging or the official MOES website for the most current customer service contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.