Introduction
Thank you for choosing the CCGIRU 1500W PTC Ceramic Space Heater. This manual provides essential information for the safe and efficient operation of your new heater. Please read it thoroughly before use and retain it for future reference.
Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater includes an automatic tip-over safety switch and overheat protection. If the heater tips over or overheats, it will automatically shut off.
- The heater is constructed with V0 flame retardant material.
Product Overview
The CCGIRU 1500W PTC Ceramic Space Heater is designed for efficient and safe indoor heating. It features advanced PTC ceramic heating technology for rapid warmth, multiple heat settings, and user-friendly controls.
Key Features:
- Powerful and Fast Heating: Advanced PTC ceramic heating technology provides rapid heat dispersion.
- Adjustable Heat Settings: Three power levels (700W, 1000W, 1500W) and three modes (Power Low/High/ECO).
- 70° Oscillation: Wide-angle oscillation for broader heat distribution.
- Quiet Operation: Engineered to reduce noise, suitable for bedrooms and offices (approx. 40dB).
- Multiple Safety Protections: Includes tip-over protection, overheat auto shut-off, and a 12-hour timer.
- Remote Control: Convenient operation from a distance.
- ETL Certified: Ensures safety and quality standards.

Figure 1: The CCGIRU 1500W PTC Ceramic Space Heater shown with its remote control. The heater features a sleek, black tower design with a digital display on top.
Setup
- Unpacking: Carefully remove the heater and all packaging materials from the box. Retain packaging for storage if needed.
- Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, curtains, or other combustible materials.
- Power Connection: Plug the heater directly into a standard 120V AC electrical outlet. Do not use extension cords or power strips.
- Remote Control: The remote control comes with batteries included. Ensure the battery tab is removed before first use.

Figure 2: Top panel of the CCGIRU heater showing the LED digital display and touch control buttons for oscillation, timer, temperature adjustment, mode selection, and power.
Operating Instructions
Your CCGIRU space heater can be operated using the touch controls on the top panel or the included remote control.
Control Panel / Remote Functions:
- Power Button: Turns the heater ON or OFF.
- Mode Button (M): Cycles through the three heat modes: Low (700W), High (1500W), and ECO.
- Temperature Up (+): Increases the desired temperature setting (41°F - 95°F).
- Temperature Down (-): Decreases the desired temperature setting (41°F - 95°F).
- Oscillation Button (OSC): Activates or deactivates the 70° oscillation function.
- Timer Button (TIMER): Sets the auto-off timer from 1 to 12 hours.
Initial Use:
- Plug the heater into a suitable electrical outlet. The digital display will show the current room temperature.
- Press the Power button to turn the heater ON. It will start in the default mode.
- Use the Mode button to select your desired heat setting (Low, High, or ECO).
- Adjust the target temperature using the Temperature Up (+) or Down (-) buttons. The heater will maintain the set temperature.
- Press the Oscillation button to activate the 70° wide-angle oscillation for even heat distribution.
- To set a timer, press the Timer button repeatedly until the desired number of hours (1-12) is displayed. The heater will automatically turn off after the set time.
Video 1: Demonstration of the CCGIRU Space Heater's features, including its rapid heating, oscillation, and control panel operation. This video highlights the heater's functionality for indoor use.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Dust Removal: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
- Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
- Cord Care: Inspect the power cord regularly for any signs of damage. Do not use the heater if the cord is damaged.
Troubleshooting
If you experience issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power switch off; tip-over switch activated; overheat protection activated. | Ensure plug is firmly in outlet; press power button; place heater on a flat, stable surface; allow heater to cool down for 30 minutes before restarting. |
| Heater stops heating unexpectedly. | Overheat protection activated; tip-over switch activated; timer expired. | Allow heater to cool; ensure heater is upright on a stable surface; check timer settings. |
| Reduced heat output. | Air intake/exhaust blocked; ECO mode selected. | Clear any obstructions from grilles; select High mode for maximum heat. |
| Remote control not working. | Batteries depleted; remote not aimed at sensor. | Replace batteries; ensure remote is aimed at the heater's control panel. |
Specifications
- Brand: CCGIRU
- Model Number: GD9215AD20
- Power: 700W / 1000W / 1500W
- Voltage: 120V
- Frequency: 60Hz
- Temperature Range: 41°F - 95°F (5°C - 35°C)
- Oscillation: 70°
- Timer: 1-12 Hours
- Dimensions: 6"D x 5"W x 5"H (approximate)
- Weight: 5.35 pounds (approximate)
- Safety Features: Tip-over protection, Overheat protection, V0 flame retardant material, ETL Certified.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official CCGIRU website. Keep your purchase receipt as proof of purchase.




