CCGIRU 1500W Portable PTC Ceramic Space Heater Instruction Manual

Introduction

Thank you for choosing the CCGIRU 1500W Portable PTC Ceramic Space Heater. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heater. Please read this manual thoroughly before use and retain it for future reference.

Important Safety Information

To reduce the risk of fire, electric shock, or injury, always follow these basic precautions:

• Read all instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• This heater includes an Overheat Protection system and a Tip-Over Switch for enhanced safety. If the heater overheats or is accidentally knocked over, it will automatically shut off.
• The heater is constructed with V-0 flame retardant material and features an Enhanced Safety Plug.
• This product is ETL Listed, ensuring it meets recognized safety standards.

Product Overview

The CCGIRU Portable PTC Ceramic Space Heater is designed to provide efficient and customizable warmth for indoor spaces. Its sleek tower design includes a convenient carry handle for portability.

Components and Features:

• Digital Display: Shows current temperature, timer settings, and mode.
• Touch Control Panel: Located on the top of the unit for manual operation.
• Remote Control: Allows convenient adjustment of settings from a distance.
• Carry Handle: Integrated for easy transport.
• Air Outlet Grille: Front-facing for heat distribution.
• Air Inlet Grille: Rear-facing for air intake.
• Stable Base: Ensures the heater remains upright during operation.

Image: Front view of the CCGIRU Portable PTC Ceramic Space Heater, highlighting its sleek design and digital display.

Image: Illustration of the heater's rapid heating capability, delivering warm air quickly.

Image: Diagram showing how the heater delivers warm air efficiently across a room, covering up to 240 sq.ft with 1500W PTC power.

Setup

1. Unpack: Carefully remove the heater from its packaging. Retain packaging for storage or in case of return.
2. Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any walls, furniture, or other objects to allow for proper airflow and prevent fire hazards.
3. Power Connection: Plug the heater directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.

Operating Instructions

The heater can be operated using the touch control panel on the top of the unit or the included remote control.

Control Panel / Remote Functions:

• Power Button (⏻): Turns the heater ON or OFF.
• Mode Button (∭): Cycles through heating modes:
  • High Heat (1500W): For rapid heating of larger spaces.
  • Low Heat (900W): For energy-efficient, gentle warmth.
  • Fan-Only: Circulates air without heat, suitable for year-round use.
• Temperature Adjustment (+ / -): Adjusts the desired temperature setting (50°F to 89°F). The heater will maintain this temperature using its built-in thermostat.
• Oscillation Button (⤺): Activates or deactivates the 120° oscillation feature for wider heat distribution.
• Timer Button (◷): Sets the automatic shut-off timer from 1 to 12 hours. Press repeatedly to increase the timer duration.

Image: Visual representation of the two methods to adjust warmth: selecting from three modes (Min, Med, Max) and setting a target temperature with the adjustable thermostat (50°F to 95°F).

Image: Diagram illustrating the 120° oscillation feature of the space heater, distributing warmth across a wider area.

Image: The heater's digital display showing the 0-12 hour timer setting, ideal for overnight use.

Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

• Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water enters the interior of the heater.
• Air Inlet/Outlet: Periodically check the air inlet and outlet grilles for dust and debris. Use a vacuum cleaner with a brush attachment to gently remove any blockages.
• Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.

Troubleshooting

If your heater is not operating correctly, refer to the following common issues and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.