Seizeen OSRC-01
Seizeen Outdoor Swivel Rocker Patio Chairs & Side Table User Manual
Model: OSRC-01
Introduction
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Seizeen Outdoor Swivel Rocker Patio Chairs with Side Table. Please read this manual thoroughly before assembly and use to ensure safe and proper operation of your furniture set.
Safety Information
WARNING:
- Ensure all parts are present and undamaged before assembly. Do not attempt to assemble if any parts are missing or broken.
- Always assemble on a soft, clean surface to prevent scratching.
- Do not overtighten screws during initial assembly. Tighten all screws fully only after all components are aligned and secured.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Do not exceed the maximum weight capacity of 350 lbs per chair.
- Periodically check all connections and tighten hardware as needed to ensure stability.
- Do not stand on the chairs or side table.
Package Contents
Your Seizeen Outdoor Swivel Rocker Patio Furniture Set includes the following components:
- 2 x Swivel Rocking Chairs
- 1 x Glass Patio Table
- 2 x Seat Cushions (6-inch thick)
- 2 x Back Cushions
- Instruction Manual
- All necessary hardware for assembly
Image: The complete Seizeen Outdoor Swivel Rocker Patio Chairs and Side Table Set, featuring two grey wicker chairs with light grey cushions and a matching side table with a glass top, set on a patio.
Setup and Assembly
Assembly of your patio furniture set is required. Please follow these steps carefully. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches. Verify all listed components are present.
- Assemble Chair Bases: Attach the chair bases to the main chair frames. Ensure proper orientation for the swivel and rocking mechanism. Do not fully tighten screws at this stage.
- Attach Chair Backs and Arms: Connect the chair backs and armrests to the assembled bases. Align all holes before inserting screws.
- Final Chair Tightening: Once all chair components are loosely assembled and aligned, gradually tighten all screws on both chairs until secure. Avoid overtightening.
- Assemble Side Table: Connect the legs to the side table frame. Place the tempered glass tabletop securely on top, ensuring the 4 suction cups hold it in place.
- Place Cushions: Position the seat and back cushions on the chairs for comfort.
Assembly Tip: Some users have reported that alignment can be challenging. It is crucial to keep all screws loose until all parts are correctly aligned and connected. This flexibility allows for minor adjustments before final tightening.
Image: Diagram showing the dimensions of the swivel rocking chair (28" D x 26" W x 33.5" H) and the side table (18.9" L x 18.9" W x 22.8" H), along with a list of included items.
Operating Instructions
Your Seizeen patio furniture set is designed for comfort and versatility in outdoor settings.
Swivel and Rocking Function
The chairs feature a unique disc base that allows for both smooth 360° rotation and gentle forward and backward rocking motion. This design provides enhanced relaxation and flexibility for various outdoor activities.
Image: Illustrates the smooth glide and 360-degree swivel capabilities of the chair, highlighting the sturdy frame and stable base with icons for "No Noise," "Sturdy Frame," and "Stable Base."
Comfort Features
The chairs are equipped with high-density sponge cushions (6-inch thick seat cushions and back cushions) for superior comfort. The ergonomic high backs and wide, curved armrests provide excellent support for extended relaxation.
Image: Shows a person relaxing in the chair, with icons highlighting features like waterproof fabric, 6-inch back cushion, ergonomic recline, 4-inch seat cushion, high back support, curved wide armrests, and high-density sponge.
Functional Side Table
The accompanying side table features a tempered glass tabletop and an extra wicker mesh storage space below. This provides convenient storage for drinks, books, or other small items while you relax.
Image: A close-up of the side table, showing its tempered glass tabletop and the extra wicker mesh storage space below, set in an outdoor garden environment.
Maintenance
Proper care will extend the life and appearance of your patio furniture set.
- Cleaning: Wipe the PE rattan wicker and metal frame with a damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
- Cushion Care: The cushion covers are made of water-resistant polyester fabric and feature smooth zippers for easy removal. They can be spot cleaned or hand washed with mild soap and water. Allow to air dry completely before reattaching.
- Glass Tabletop: Clean the tempered glass tabletop with a glass cleaner and a soft cloth.
- Weather Protection: While the wicker is weather-resistant and UV-resistant, prolonged exposure to extreme weather conditions (heavy rain, snow, intense sun) can affect its longevity. Consider using furniture covers or storing the set indoors during off-season or severe weather.
- Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and safety.
Image: Close-up of the hand-woven PE rattan wicker material, highlighting its wear-resistant, waterproof, UV-resistant, and easy-to-clean properties with corresponding icons.
Troubleshooting
If you encounter any issues with your Seizeen patio furniture set, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty aligning holes during assembly. | Screws were tightened too early. | Loosen all screws on the section you are working on. Ensure all parts are correctly positioned and aligned before gradually tightening all screws. Do not fully tighten any screw until all connections are made. |
| Chair feels wobbly or unstable. | Loose hardware. | Check all bolts and screws. Tighten any loose hardware. Ensure the chair is on a flat, level surface. |
| Cushions appear discolored or dirty. | Exposure to elements or spills. | Remove cushion covers and spot clean or hand wash with mild soap. Allow to air dry completely. For best results, store cushions indoors when not in use or during inclement weather. |
| Glass tabletop slides or moves. | Suction cups not properly engaged or missing. | Ensure the four suction cups are present and firmly pressed onto the underside of the glass tabletop and the table frame. Clean both surfaces before placing the glass. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | OSRC-01 |
| Brand | Seizeen |
| Color | Grey |
| Materials | PE Rattan, Metal, Glass, Polyester, Sponge |
| Chair Dimensions (L x W x H) | 28 x 26 x 33.5 inches |
| Side Table Dimensions (L x W x H) | 18.9 x 18.9 x 22.8 inches |
| Item Weight | 105.8 pounds (total package) |
| Chair Weight Capacity | Up to 350 lbs per chair |
| Product Care | Wipe with Damp Cloth |
Warranty and Support
Seizeen is committed to providing quality products. For any questions or concerns regarding your patio furniture set, please contact customer support.
- Returns: This product is eligible for a 30-day easy return policy. Please refer to your purchase platform for specific return instructions.
- Protection Plans: Extended protection plans may be available for purchase, including 2-Year and 3-Year options. Check your purchase details for more information.
- Customer Support: If you encounter any issues while using the product, do not hesitate to reach out to Seizeen customer support. Responses are typically provided within 24 hours.
- Online Resources: For additional support and product information, visit the official Seizeen store on Amazon: Seizeen Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.