1. Introduction
Thank you for purchasing the TIMU S11 Bluetooth Speaker with Light. This manual provides important information regarding the setup, operation, and maintenance of your device. Please read it carefully before use and retain it for future reference.
Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble or attempt to repair the speaker yourself.
- Keep the speaker away from water and other liquids, despite its waterproof rating, to prevent damage to charging ports or internal components.
- Use only the provided charging cable or a certified equivalent.
2. Package Contents
Please check the package for the following items:
- TIMU S11 Bluetooth Speaker
- Power Cable
- User Manual (this document)
3. Product Overview
The TIMU S11 is a portable Bluetooth speaker featuring integrated lighting. It offers stereo and surround sound output with Bluetooth 5.4 connectivity.
Controls and Indicators
(Note: Specific button layout and indicator descriptions are not available in the provided data. Please refer to the physical product for exact button locations and functions.)
- Power Button: Press and hold to turn on/off.
- Bluetooth Pairing Button: Initiates Bluetooth pairing mode.
- Volume Up/Next Track: Short press for volume up, long press for next track.
- Volume Down/Previous Track: Short press for volume down, long press for previous track.
- Play/Pause Button: Controls music playback and answers/ends calls.
- Light Mode Button: Cycles through different light modes.
- Charging Port: For connecting the power cable.
- LED Indicator: Shows power status, charging status, and Bluetooth connection status.
4. Setup
4.1 Charging the Speaker
- Connect the provided power cable to the charging port on the speaker.
- Plug the other end of the cable into a suitable USB power adapter (not included) or a powered USB port.
- The LED indicator will show the charging status (e.g., red for charging, off or green for fully charged).
- Allow approximately 3-4 hours for a full charge before first use.
4.2 Bluetooth Pairing
- Ensure the speaker is fully charged.
- Press and hold the Power Button to turn on the speaker. The LED indicator will flash, indicating it's in pairing mode.
- On your mobile device (smartphone, tablet, computer), enable Bluetooth.
- Search for available Bluetooth devices. You should see "TIMU S11" in the list.
- Select "TIMU S11" to connect. Once connected, the LED indicator will stop flashing and remain solid.
- The speaker is now ready to play audio from your device.
5. Operating Instructions
5.1 Audio Playback
- Play/Pause: Press the Play/Pause button once to play or pause music.
- Volume Control: Short press the Volume Up or Volume Down buttons to adjust the volume.
- Next/Previous Track: Long press the Volume Up button for the next track, and long press the Volume Down button for the previous track.
5.2 Light Control
Press the Light Mode Button to cycle through various lighting effects. Continue pressing to find your preferred mode or to turn the lights off.
5.3 Hands-Free Calling
When connected to a smartphone via Bluetooth:
- Answer Call: Press the Play/Pause button once to answer an incoming call.
- End Call: Press the Play/Pause button once during a call to end it.
- Reject Call: Press and hold the Play/Pause button to reject an incoming call.
6. Maintenance
6.1 Cleaning
- Ensure the speaker is turned off and disconnected from any power source before cleaning.
- Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Do not immerse the speaker in water.
6.2 Storage
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery periodically (e.g., every 3 months) to maintain battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on | Low battery | Charge the speaker fully. |
| Cannot pair via Bluetooth | Bluetooth not enabled on device; speaker not in pairing mode; too far from device | Ensure Bluetooth is on. Put speaker in pairing mode. Move device closer (within 50 feet). Clear previous Bluetooth connections on your device. |
| No sound | Volume too low; device not connected; incorrect audio source | Increase volume on both speaker and connected device. Re-pair Bluetooth. Check audio output settings on your device. |
| Lights not working | Light mode off; low battery | Press the Light Mode Button to cycle through modes. Charge the speaker. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | S11 |
| Brand | TIMU |
| Product Dimensions (L x W x H) | 19 x 8 x 8 cm |
| Weight | 760 grams |
| Connectivity Technology | Bluetooth 5.4 |
| Wireless Communication Range | Up to 50 Feet (approx. 15 meters) |
| Speaker Size | 60 Millimeters |
| Maximum Speaker Output Power | 30 Watts |
| Audio Output Mode | Stereo, Surround |
| Surround Sound Channel Configuration | 2.0 |
| Speaker Type | 3D |
| Power Source | Battery and Cable |
| Waterproof | Yes |
| Included Components | Power Cable |
| Color | Green |
9. Warranty and Support
TIMU products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit our official website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact TIMU customer service through the contact information provided on our official website or your purchase platform.