Introduction
Thank you for choosing the HOMCOM Rocking Chair with Massage and Headrest. This manual provides essential information for the safe assembly, operation, and maintenance of your new rocking chair. Please read it thoroughly before use and retain it for future reference.
A person relaxing in the grey HOMCOM rocking chair, demonstrating its comfortable design and integrated features.
Setup and Assembly
Assembly of this rocking chair is required. Please ensure all components are present before beginning. Refer to the detailed assembly instructions included in your package for step-by-step guidance.
Included Components:
- Rocking Chair Frame (Birch Plywood and Steel)
- Cushioned Seat and Backrest (Velvet Fabric, Foam Filling)
- Adjustable Footrest
- Massage Adapter
- Remote Control
- User Manual
- Assembly Hardware (screws, bolts, tools if provided)
Assembly Overview:
- Unpack all components and verify against the parts list in the included manual.
- Attach the main frame sections securely.
- Install the cushioned seat and backrest onto the frame.
- Connect the adjustable footrest mechanism.
- Connect the massage unit and power adapter.
- Ensure all connections are tight and the chair is stable before use.
A visual guide illustrating the step-by-step assembly of the rocking chair, demonstrating how components fit together.
Operating Instructions
Massage and Heating Functions:
Your rocking chair features an 8-point vibrating massage system and 3-level lumbar heating for enhanced relaxation. These functions are controlled via the included remote control.
- Power On/Off: Press the power button on the remote to activate or deactivate the massage and heating.
- Massage Modes: Select from three distinct massage modes to suit your preference.
- Intensity Levels: Adjust the massage intensity to one of three available levels.
- Lumbar Heating: Activate the lumbar heating function and choose from three heat levels for soothing warmth.
An illustration highlighting the eight massage points within the chair and the remote control used to operate the massage and heating functions.
Adjustable Footrest:
The chair is equipped with a five-level adjustable footrest, allowing you to find your optimal position for reading, napping, or watching TV. The footrest adjusts smoothly from 0° to 90°.
- To adjust, gently lift the footrest to the desired angle. It will lock into one of the five positions.
- To lower, lift it slightly past the highest position to release the lock, then push it down.
A user adjusting the five-level footrest of the rocking chair, showcasing its flexibility for various reclining positions.
Side Pocket:
A convenient side pocket is integrated into the chair for storing your remote control, magazines, or other small items.
This image highlights key design elements such as the supportive headrest, ergonomically curved armrests, and a convenient side pocket for storage.
Maintenance and Care
Proper care will extend the life and appearance of your HOMCOM rocking chair.
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the fabric and wood finish.
- Fabric Care: The chair is upholstered in soft, breathable velvet fabric (100% polyester). For spills, blot immediately with a clean, dry cloth. Do not rub.
- Wood Frame Care: The frame is made of birch plywood. Periodically check and tighten any loose screws or bolts to maintain stability.
- Electrical Components: Ensure the massage adapter and remote control are kept dry. Disconnect from power when not in use for extended periods.
This image emphasizes the chair's soft, breathable velvet fabric and thick foam padding, designed for maximum comfort.
A detailed shot of the chair's robust birch plywood and steel frame, ensuring a smooth and secure rocking motion.
Troubleshooting
If you encounter any issues with your rocking chair, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Massage/Heating not working | Power adapter not connected, remote control battery low, unit switched off. | Ensure power adapter is securely plugged into both the chair and a working outlet. Check remote control batteries. Press the power button on the remote. |
| Chair feels unstable/wobbly | Loose assembly hardware. | Carefully inspect all bolts and screws. Tighten any that are loose. Do not overtighten. |
| Footrest not adjusting smoothly | Mechanism obstruction or misalignment. | Check for any obstructions around the footrest mechanism. Ensure it is properly aligned with its locking positions. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
- Model Number: 83B-351V90GY
- Color: Grey
- Overall Dimensions (D x W x H): 106 cm x 67 cm x 92 cm
- Seat Dimensions (W x D x H): 56 cm x 47 cm x 30-43 cm
- Backrest Height: 62 cm
- Armrest Height: 59 cm
- Weight Capacity: 120 kg
- Materials: Birch Plywood Frame, Steel, 100% Polyester Velvet Fabric, Foam Filling
- Massage Points: 8-point vibration
- Massage Modes: 3
- Massage Intensity: 3 levels
- Lumbar Heating: 3 levels
- Footrest Adjustment: 5 positions (0° to 90°)
- Assembly Required: Yes
- Usage: Indoor
This image provides a detailed diagram of the rocking chair's dimensions, including height, width, and depth, essential for placement and space planning.
Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical support, have questions about assembly, or need replacement parts, please contact HOMCOM customer service or the seller directly. Please have your model number (83B-351V90GY) and purchase details ready when contacting support.