Electactic Countertop Ice Maker

Introduction

Thank you for choosing the Electactic Countertop Ice Maker. This compact and efficient appliance is designed to provide you with fresh ice quickly and conveniently. Please read this manual thoroughly before operating your ice maker to ensure safe and optimal performance. Keep this manual for future reference.

The Electactic Countertop Ice Maker, ready to provide fresh ice for your beverages.

Safety Information

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using this appliance:

• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical hazards, do not immerse cord, plugs, or the appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use appliance for other than intended household use.
• Ensure the appliance is placed on a stable, level surface.

Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

• Electactic Countertop Ice Maker
• Ice Scoop
• Ice Basket
• User Manual (this document)

Product Overview

The Electactic Ice Maker is designed for ease of use and portability, featuring a transparent lid to monitor ice production and intuitive indicator lights.

The Electactic Ice Maker with its clear lid and control panel.

Key Components:

• Control Panel: Features Power, Ice Full, and Add Water indicators.
• Transparent Lid: Allows visibility of the ice-making process.
• Ice Basket: Removable basket for collecting ice cubes.
• Water Reservoir: Located beneath the ice basket, where water is stored for ice production.
• Ice Scoop: For convenient removal of ice.
• Drain Plug: Located at the bottom for easy water drainage during cleaning.

Setup

1. Unpacking:

Carefully remove the ice maker from its packaging. Remove all packing materials, including any tape or protective film. Ensure all accessories (ice scoop, ice basket) are accounted for.

2. Placement:

Place the ice maker on a stable, level surface away from direct sunlight and heat sources (like ovens, radiators, or stoves). Ensure there is at least 4 inches (10 cm) of space around the unit for proper ventilation. This compact design allows for versatile placement in kitchens, offices, or other areas.

The ice maker's sleek and space-saving design (8.7"D x 11.6"W x 11.4"H) makes it suitable for various locations.

3. Initial Cleaning:

Before first use, clean the interior of the ice maker. Remove the ice basket and wash it with warm, soapy water. Wipe the interior with a soft cloth. For a more thorough initial clean, you can run a self-cleaning cycle with a mixture of water and white distilled vinegar (see Maintenance section).

4. Power Connection:

Plug the power cord into a grounded electrical outlet. Ensure the voltage matches the specifications of your ice maker.

Operating Instructions

1. Add Water:

Open the transparent lid and remove the ice basket. Fill the water reservoir with clean, potable water up to the MAX fill line. Do not overfill. Replace the ice basket and close the lid.

2. Start Ice Production:

Press the 'ON/OFF' button on the control panel. The 'POWER' indicator light will illuminate, and the ice maker will begin its cycle. The unit is designed for high efficiency, producing 9 bullet-shaped ice cubes in as little as 6-8 minutes, depending on ambient temperature and water temperature.

The ice maker efficiently produces bullet-shaped ice cubes.

3. Ice Collection:

Once ice cubes are formed, they will drop into the ice basket. The 'ICE FULL' indicator light will illuminate when the ice basket is full, and the ice maker will automatically pause production. Remove ice using the provided scoop. The ice maker will resume production once ice is removed and the 'ICE FULL' light turns off.

4. Add Water Indicator:

If the water level in the reservoir is too low, the 'ADD WATER' indicator light will illuminate, and the ice maker will pause. Add more water to the reservoir, and the unit will automatically resume operation.

5. Noise Level:

The Electactic Ice Maker operates with a low noise level, making it suitable for various environments without causing significant disturbance.

Enjoy quiet operation with your Electactic Ice Maker.

Maintenance

1. Self-Cleaning Function:

The ice maker features a convenient self-cleaning mode. To activate, ensure the unit is plugged in and has water in the reservoir. Press and hold the 'ON/OFF' button for approximately 5 seconds. The unit will initiate a cleaning cycle, circulating water to clean internal components. This cycle typically takes about 15-25 minutes. After the cycle, drain the water.

The ice maker's one-click self-cleaning function helps maintain hygiene.

2. Regular Cleaning:

For optimal performance and hygiene, clean your ice maker regularly, especially if it's not used daily. Unplug the unit before cleaning. Remove the ice basket and wash it with mild detergent and warm water. Wipe the interior of the water reservoir and ice-making components with a soft cloth dampened with a mild cleaning solution or a mixture of water and white distilled vinegar. Rinse thoroughly with clean water.

3. Draining Water:

To drain the water from the reservoir, locate the drain plug at the bottom of the unit. Place a container beneath the plug and remove it to allow water to flow out. Once drained, securely replace the plug.

Troubleshooting

If you encounter issues with your ice maker, please refer to the following common problems and solutions:

Specifications

Warranty and Support

Your Electactic Ice Maker is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Electactic Customer Service through the retailer where you purchased the product or visit the official Electactic website.

Note: No official product videos from the seller were available for embedding in this manual.