1. Introduction
Thank you for choosing the Poolin EOC02 Computerized Sewing Machine. This machine is designed to provide a versatile and user-friendly sewing experience, suitable for both beginners and experienced users. With 200 built-in stitches, a wide table, and intuitive controls, the EOC02 is equipped to handle a variety of sewing projects. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new sewing machine.
2. Safety Instructions
To ensure safe operation and prevent injury or damage, please read and follow all safety instructions carefully before using the machine.
- Always unplug the sewing machine from the electrical outlet immediately after use, before cleaning, or when making any adjustments.
- Keep fingers away from all moving parts, especially the needle, presser foot, and handwheel.
- Use the correct needle plate for the stitch you are performing to prevent needle breakage.
- Do not operate the machine if the power cord is damaged or if the machine is not working properly. Contact customer support for assistance.
- Never drop or insert any object into any opening.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Package Contents
Carefully unpack all items and ensure all components are present. If any items are missing or damaged, please contact Poolin customer support.
Image: The Poolin EOC02 sewing machine displayed with its full set of accessories, including the wide extension table, foot pedal, various presser feet, thread spools, and a box of prewound bobbins.
- Poolin EOC02 Computerized Sewing Machine
- Wide Extension Table
- Foot Pedal
- Power Cord
- Standard Presser Feet (7 types for various applications)
- Prewound Bobbins (144 pcs, 75D/2 (60WT) Polyester Bobbin Thread)
- Additional Thread Spools
- Needle Set
- Seam Ripper
- Cleaning Brush
- Screwdriver
- Instruction Manual (this document)
4. Product Overview
4.1. Machine Components
Familiarize yourself with the main components of your sewing machine.
Image: Side view of the Poolin EOC02 sewing machine with the wide table attached, illustrating its approximate dimensions: 23.5 inches in length, 11.4 inches in depth, and 11 inches in height.
4.2. Control Panel and Display
The EOC02 features an intuitive control panel and an LCD display for easy stitch selection and setting adjustments.
Image: Close-up view of the LCD display and the stitch pattern guide on the Poolin EOC02, showing the selected stitch number, and adjustable stitch width and length settings.
Image: Close-up of the One-Touch Start/Stop button, indicated by an upward arrow, and the reverse stitch button on the Poolin EOC02 sewing machine, enabling pedal-free operation.
Image: Close-up of the One-Step Speed Control slider on the Poolin EOC02 sewing machine, allowing users to easily adjust sewing speed from 'Slow' to 'Fast'.
5. Setup
5.1. Unpacking and Placement
- Remove the machine from its packaging.
- Place the machine on a stable, flat surface. Ensure there is adequate space around the machine for fabric handling.
5.2. Attaching the Wide Table
- Align the pegs on the wide table with the corresponding holes on the free arm of the sewing machine.
- Gently push the table towards the machine until it clicks securely into place.
5.3. Connecting Power and Foot Pedal
- Insert the power cord into the power input jack on the machine.
- Plug the other end of the power cord into a suitable electrical outlet.
- If using the foot pedal, insert its plug into the foot pedal jack on the machine.
5.4. Winding the Bobbin
The Poolin EOC02 comes with prewound bobbins. If you need to wind your own bobbins with custom thread, follow these general steps:
Image: A diagram illustrating the differences between Style L and Style A bobbins, including their respective diameters and heights, to help users choose the correct bobbin type for their machine.
- Place a spool of thread on the spool pin.
- Guide the thread through the bobbin winding tension disc.
- Place an empty bobbin onto the bobbin winder spindle.
- Wrap the thread around the bobbin a few times clockwise.
- Push the bobbin winder spindle to the right.
- Start the machine (using the foot pedal or start/stop button) to wind the bobbin. Stop when the bobbin is full.
- Cut the thread and return the bobbin winder spindle to the left.
5.5. Threading the Upper Thread
- Raise the presser foot lifter.
- Place a spool of thread on the spool pin.
- Follow the numbered threading path indicated on the machine, ensuring the thread passes through all guides and the take-up lever.
- Thread the needle from front to back.
6. Operating Instructions
6.1. Power On/Off
- Locate the power switch on the side or back of the machine.
- Flip the switch to the 'ON' position to power on the machine. The LCD display will illuminate.
- Flip the switch to the 'OFF' position when finished sewing.
6.2. Stitch Selection and Adjustment
- Use the stitch selection buttons (usually indicated by arrows or numbers) to scroll through the 200 available stitches. The selected stitch number will appear on the LCD display.
- Adjust stitch length and width using the dedicated adjustment buttons, as indicated on the LCD display.
6.3. Using the Start/Stop Button and Speed Control
- For pedal-free operation, press the Start/Stop button to begin sewing. Press it again to stop.
- Adjust the sewing speed using the speed control slider. Slide towards 'Slow' for slower speeds and 'Fast' for higher speeds.
- If using the foot pedal, the Start/Stop button will be overridden, and speed will be controlled by pedal pressure.
6.4. Reverse Stitching
- To reinforce stitches at the beginning or end of a seam, press and hold the reverse button. The machine will sew backward.
- Release the button to resume forward stitching.
6.5. Changing Presser Feet
- Ensure the needle is in its highest position and the machine is turned off.
- Press the release lever at the back of the presser foot holder to detach the current foot.
- Place the desired presser foot under the holder, aligning the pin on the foot with the groove on the holder.
- Lower the presser foot lifter until the foot snaps into place.
6.6. Fabric Compatibility
The Poolin EOC02 is designed to handle a versatile selection of fabrics, making it suitable for both everyday sewing and creative projects. This includes:
- Delicate Fabrics: Satin, Silk, Organza, Taffeta – ideal for dresses, linings, and bridal wear.
- Stretch & Knit Materials: Jersey, Lycra, Spandex – perfect for activewear and t-shirts.
- Standard Fabrics: Cotton, Linen, Polyester blends.
Note: Thin and stretch fabrics may require stabilizers to ensure clean, even stitching. Always test on a scrap piece of fabric before sewing your main project.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your sewing machine.
7.1. Cleaning
- Always unplug the machine before cleaning.
- Remove the needle plate and bobbin case.
- Use the provided cleaning brush to remove lint and dust from the feed dogs, bobbin area, and tension discs.
- Wipe the exterior of the machine with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
7.2. Needle Replacement
- Replace the needle regularly (after every 8-10 hours of sewing or when it becomes dull/bent).
- Ensure the machine is off and the needle is in its highest position.
- Loosen the needle clamp screw and remove the old needle.
- Insert a new needle with the flat side facing the back of the machine, pushing it up as far as it will go.
- Tighten the needle clamp screw securely.
8. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine not starting | Power cord not plugged in; Power switch off; Foot pedal not connected (if using) | Check power connections; Turn power switch ON; Ensure foot pedal is securely plugged in. |
| Skipped stitches | Incorrect needle size/type; Bent or dull needle; Improper threading | Replace needle with correct type for fabric; Replace bent/dull needle; Re-thread machine correctly. |
| Thread breaking | Incorrect tension; Improper threading; Damaged needle; Poor quality thread | Adjust tension settings; Re-thread machine; Replace needle; Use good quality thread. |
| Fabric not feeding | Feed dogs lowered; Lint in feed dogs; Presser foot not lowered | Raise feed dogs; Clean feed dog area; Lower presser foot before sewing. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | EOC02 |
| Stitch Count | 200 Built-in Stitches |
| Presser Feet Included | 7 |
| Display Type | LCD |
| Dimensions (Approx. with Wide Table) | 23.5" (Length) x 11.4" (Depth) x 11" (Height) |
| ASIN | B0FKMZ36KG |
| Date First Available | May 28, 2025 |
10. Warranty and Support
Poolin is committed to providing excellent customer support. We have a dedicated support team available to guide you through assembly, threading, testing, and any other questions you may have to ensure you overcome the learning curve quickly.
Image: A tablet screen displaying a Poolin Embroidery Machine social media group, with icons for various support channels including YouTube, Instagram, TikTok, and Facebook, indicating multiple avenues for customer assistance.
For technical assistance, troubleshooting, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Poolin website. You may also find helpful resources and community support through Poolin's social media channels.
Please retain your proof of purchase for warranty claims.
