1. Introduction
The GuliKit ES Pro controller is a high-performance gamepad designed for competitive gaming, offering both wireless and wired connectivity. It features advanced technologies such as TMR magnetic sticks for drift prevention, Hall effect triggers for precise input, and ultra-low latency wireless communication. This controller is compatible with a wide range of platforms including PC, Nintendo Switch, Android, iOS, macOS, Steam Deck, ROG Ally, and Ally X.
Image: GuliKit ES Pro Controller, showcasing its ergonomic design.
2. Setup and Connection
2.1 Initial Pairing (Switch/Switch 2)
Before use, ensure your controller has the latest firmware. Refer to the 'Firmware Update' section for instructions.
- Set the controller to NS mode using the switch on the back.
- Turn on the controller and press and hold the pairing button (located between the D-pad and right stick) for 2 seconds. The indicator lights will flash rapidly, indicating pairing mode.
- For Switch 2 sleep wake-up functionality: Put your Switch 2 console into sleep mode (black screen). Press the HOME button on a Joy-Con to light up the screen, then navigate to the controller pairing screen on the console and complete the pairing process.
- If pairing in the normal way (without sleep mode), the sleep wake-up function will not be supported.
- Ensure your Switch 2 system version is 20.3.0 or higher for optimal compatibility.
2.2 Pairing for PC (Bluetooth Mode)
For PC and other non-Switch devices, please use PC mode for pairing.
- Set the controller to PC mode.
- Activate Bluetooth on your PC or device.
- Press and hold the pairing button on the controller until the indicator lights flash rapidly.
- Select the GuliKit ES Pro controller from your device's Bluetooth settings to complete pairing.
2.3 Wired Connection
Connect the controller to your device using the provided USB-C cable. The controller will automatically switch to wired mode.
Image: GuliKit ES Pro Controller showing both wired (USB-C) and wireless (Bluetooth) connection options.
3. Operating Instructions
3.1 Turbo Function
The controller supports Turbo full-automatic and semi-automatic continuous firing functions. Specific buttons (A, B, X, Y, R, ZR) can be configured for this feature. Refer to the detailed instructions in the included Japanese manual for button-specific setup.
Image: GuliKit ES Pro Controller highlighting the automatic continuous firing function.
3.2 Stick Sensitivity Adjustment
The sensitivity of the TMR sticks can be adjusted to three levels: low, medium, and high. This allows customization for different game genres and personal preferences. All adjustments are performed directly on the controller.
3.3 Vibration Adjustment
The asymmetric vibration motors offer adjustable intensity with three levels. Vibration can also be toggled on or off. This feature enhances immersion by providing realistic feedback during gameplay.
Image: GuliKit ES Pro Controller illustrating the asymmetric dual vibration motors.
3.4 D-pad Mode (4-way/8-way)
The high-precision tactile D-pad supports both 4-way and 8-way input settings, allowing for accurate directional control in various games.
Image: GuliKit ES Pro Controller showing the D-pad with 4-way/8-way switchable functionality.
3.5 ABXY Button Layout Switching
The controller allows for switching between PC and Switch ABXY button layouts without physical modification. Optional replacement button parts are available separately for physical customization.
Image: GuliKit ES Pro Controller demonstrating ABXY button layout customization.
3.6 Snapback Prevention Mode
This mode is designed to prevent unintended character movement when the analog stick quickly returns to the center after being pushed to its limit. It achieves this by lowering the sampling rate during the stick's return to center. A firmware update is required to enable this feature.
4. Key Features
- Hyperlink 2 Wireless Technology: GuliKit's proprietary wireless technology achieves ultra-low latency of 3.25ms (730Hz polling rate) in PC Bluetooth mode and 1.87ms (1000Hz polling rate) in wired mode, providing a competitive edge.
- TMR Magnetic Sticks: Equipped with 4000-level ultra-high precision TMR (Tunnel Magnetoresistance) sticks, which use an electromagnetic structure to fundamentally prevent stick drift and ensure high durability.
- 256-Level Hall Effect Triggers: Provides precise analog input, making it ideal for racing games and other genres requiring fine control.
- Ergonomic Design & Anti-slip Grip: Designed for comfort during extended gaming sessions, with an anti-slip grip and optimally placed buttons to reduce fatigue.
- 6-Axis Gyro Sensor: Enables intuitive motion control, reflecting controller movements (shaking, tilting) directly into the game.
- Conductive Rubber Buttons: The ABXY buttons utilize conductive rubber material to prevent sticking and ensure consistent, comfortable presses over long periods.
- Long Battery Life: Equipped with a 950mAh battery, providing up to 30 hours of continuous use. The controller features an automatic power-off function after 15 minutes of inactivity and boasts near-zero standby power consumption, allowing it to retain charge for up to a year after a full charge.
- PC Somatosensory Assisted Aiming Technology: GuliKit's patented technology assists in more accurate targeting in FPS/TPS games, enhancing the overall gaming experience.
Image: GuliKit ES Pro Controller highlighting Hyperlink 2 wireless technology for ultra-low latency.
Image: GuliKit ES Pro Controller featuring TMR magnetic sticks for drift prevention and high precision.
Image: GuliKit ES Pro Controller showcasing its 256-level Hall effect triggers.
Image: GuliKit ES Pro Controller illustrating the 6-axis gyro sensor functionality.
Image: GuliKit ES Pro Controller showing the conductive rubber ABXY buttons.
Image: GuliKit ES Pro Controller highlighting its 950mAh large capacity battery for extended use.
Image: GuliKit ES Pro Controller demonstrating PC somatosensory assisted aiming technology.
5. Maintenance
To ensure the longevity and optimal performance of your GuliKit ES Pro controller, follow these maintenance guidelines:
- Keep the controller clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping the controller or subjecting it to strong impacts.
- When not in use for extended periods, ensure the controller is fully charged before storage to maintain battery health.
6. Troubleshooting
6.1 Pairing Issues
- If the controller fails to pair, ensure it is in the correct mode (NS for Switch, PC for others).
- For Switch 2 sleep wake-up, follow the specific pairing steps outlined in section 2.1.
- If pairing issues persist, try deleting the controller's pairing information from your device's Bluetooth settings and re-pairing.
6.2 Controller Not Recognized on PC
- If the controller is not automatically recognized when connected to a PC, try turning the controller off and then on again.
- Ensure the controller is in PC mode for PC connections.
6.3 Incorrect Button Mapping on Android
- Some Android OS versions may experience incorrect button mapping (e.g., X to Y, Y to LB) when connected via Bluetooth.
- As of the current information, this issue may require a firmware update from GuliKit. Wired connection to Android devices typically resolves button mapping issues.
6.4 Button Not Working or Stick Stuck on Startup
- If a button stops working or a stick appears stuck in one direction, turn the controller off.
- Turn the controller back on without touching any controls. The controller performs a self-check on startup, and holding a button can prevent its recognition.
6.5 General Issues
- Always ensure your controller has the latest firmware. Many issues can be resolved with a firmware update.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | ES Series |
| Battery | 1 Non-standard battery (included) |
| Battery Capacity | 950mAh |
| Continuous Use Time | Up to 30 hours |
| Wireless Polling Rate (PC Bluetooth) | 730Hz (3.25ms latency) |
| Wired Polling Rate | 1000Hz (1.87ms latency) |
| Dimensions | 15.9 x 11.3 x 6.6 cm |
| Weight | 320 g |
| Compatibility | PC, Switch, Android, iOS, macOS, Steam Deck, ROG Ally, Ally X |
| Country of Origin | China |
| Included Items | ES Pro controller unit, USB-C cable, Japanese instruction manual |
8. Firmware Update
Keeping your controller's firmware updated ensures optimal performance, compatibility, and access to new features or bug fixes.
- Access the official GuliKit website.
- Navigate to the [Download] section.
- Select the firmware corresponding to your ES Pro controller model.
- Download the firmware file.
- Follow the specific update guide provided on the website page to complete the firmware update process.
Image: Instructions for updating GuliKit controller firmware.
9. Warranty and Support
For warranty information, technical support, or further assistance, please visit the official GuliKit website or contact their customer service directly. Details regarding warranty periods and service procedures can be found on their support pages.
