1. Introduction and Overview
The Logitech G Clutch Module is an accessory designed to enhance your sim racing experience by providing realistic manual shifting control. This module is engineered for racing enthusiasts and is exclusively compatible with Logitech G RS Racing Pedals (sold separately). It replicates real-world racing dynamics through its durable, precision-built design and Hall Effect sensor, ensuring smooth and consistent performance.
This manual provides essential information for the proper setup, operation, and maintenance of your Logitech G Clutch Module.
Figure 1: Logitech G RS Clutch Module.
2. Package Contents
- Logitech G Clutch Module
- Mounting Hardware (screws, hex wrench)
- Instruction Manual (this document)
3. Setup and Installation
The RS Clutch Module is designed for seamless integration with your existing Logitech G RS Racing Pedals. Ensure your RS Racing Pedals are securely mounted before proceeding with the clutch module installation.
3.1 Attaching the Clutch Module
- Position the clutch module on the pedal plate of your RS Racing Pedals. The design allows for flexible mounting along pre-drilled areas to suit your setup preferences.
- Align the mounting holes on the clutch module with the corresponding holes on the pedal plate.
- Secure the clutch module using the provided screws and hex wrench. Ensure all screws are tightened firmly to prevent movement during use.
- Connect the clutch module cable to the designated port on your RS Racing Pedals or directly to your PC/console if applicable (refer to your RS Racing Pedals manual for specific connection details).
Figure 2: Installation of the clutch module onto the pedal base.
3.2 Pedal Plate Adjustment
The pedal plate on the clutch module can be adjusted to optimize comfort and performance. Loosen the screws securing the pedal plate, adjust it to your desired angle and height, and then re-tighten the screws securely.
Figure 3: Side view of the clutch module, illustrating potential adjustment points for the pedal plate.
4. Operating the Clutch Module
The Logitech G Clutch Module provides a realistic manual clutch action for your sim racing setup. Its Hall Effect sensor ensures precise and consistent engagement and disengagement.
4.1 Basic Operation
- Engagement: Press the clutch pedal fully to disengage the clutch, allowing for gear changes.
- Disengagement: Release the clutch pedal smoothly to engage the clutch, transferring power to the wheels.
- Feel: The module is designed to offer a progressive feel, mimicking the resistance of a real car clutch.
Figure 4: The clutch module integrated into a full RS Racing Pedals setup.
4.2 Software Calibration
For optimal performance, it is recommended to calibrate your clutch module within your sim racing software or Logitech G HUB. This ensures the full range of motion is recognized and accurately translated in-game. Refer to your specific game or software documentation for calibration instructions.
5. Maintenance
Regular maintenance helps ensure the longevity and consistent performance of your Logitech G Clutch Module.
- Cleaning: Periodically wipe down the pedal and module with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Regularly check for any loose screws or connections. Tighten as necessary.
- Lubrication: While the Hall Effect sensor design minimizes wear, if you notice any stiffness or unusual friction in the mechanical parts over extended use, a small amount of silicone-based lubricant can be applied to moving pivot points. Avoid applying lubricant directly to the sensor or electronic components.
Figure 5: Internal mechanism of the clutch module, highlighting areas for potential inspection and lubrication.
6. Troubleshooting
If you encounter issues with your Logitech G Clutch Module, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Clutch not responding in-game. | Incorrect connection, software issue, or calibration needed. |
|
| Inconsistent clutch engagement/disengagement. | Dust/debris, sensor interference, or calibration drift. |
|
| Physical stiffness or squeaking. | Lack of lubrication or debris in moving parts. |
|
If the issue persists, please contact Logitech G Support for further assistance.
7. Specifications
- Brand: Logitech G
- Model Name: RS Clutch Module
- Model Number: 941-000307
- Item Weight: 2.4 Pounds (approx. 1.09 kg)
- Item Dimensions (LxWxH): 15.02 x 3.15 x 8.01 inches (approx. 38.15 x 8.00 x 20.35 cm)
- Connectivity Technology: USB
- Controller Type: Pedals (Clutch Module)
- Compatible Devices: PC, PlayStation 4, PlayStation 5, Xbox Series S, Xbox Series X (when used with compatible RS Pedals)
- Hardware Platform: Desktop, Gaming Console, Laptop
- Power Source: Corded Electric
- Additional Features: Ergonomic design, Hall Effect sensor for precision.
- Color: Black
8. Warranty and Support
8.1 Warranty Information
The Logitech G Clutch Module comes with a 2-Year Limited Hardware Warranty. This warranty covers defects in materials and workmanship under normal use. For full terms and conditions, please refer to the official Logitech G website or the warranty documentation included with your product.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty claims, please visit the official Logitech G Support website:
You may also find helpful resources, FAQs, and community forums on the Logitech G website.