OSCAL PowerMax 2400 Solar Power Station and 4x100W Solar Panel User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your EcoVolt OSCAL PowerMax 2400 Solar Power Station and the accompanying 4x100W Solar Panels. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage or injury.

2. Important Safety Instructions

• Do not disassemble, repair, or modify the unit. Incorrect reassembly may cause fire or electric shock.
• Do not place the unit near fire or expose it to heat. Keep out of direct sunlight.
• Do not charge, use, or store the unit in a bathroom or an area exposed to water or high humidity.
• Use only the original charger and cables provided or approved by the manufacturer.
• Keep the unit away from children and pets.
• Do not use the unit if it is damaged or has been modified.
• Ensure proper ventilation during use and charging. Do not cover the unit.
• Dispose of the product according to local regulations.

3. Package Contents

Verify that all items listed below are included in your package:

• OSCAL PowerMax 2400 Portable Power Station
• 4 x 100W Foldable Solar Panels
• AC Charging Cable
• Car Charging Cable
• Solar Charging Cable (MC4 to XT60)
• User Manual

4. Product Overview

Figure 4.1: OSCAL PowerMax 2400 Power Station and Solar Panels.

This image displays the OSCAL PowerMax 2400 portable power station alongside four foldable 100W solar panels. The power station features multiple output ports, a digital display, and sturdy handles. The solar panels are shown both unfolded and folded, highlighting their portability and connection capabilities.

4.1 Power Station Components

• Digital Display: Shows battery level, input/output power, and error indicators.
• AC Output Ports: Standard wall outlets for AC-powered devices.
• DC Output Ports: Includes car port and DC5521 ports for 12V devices.
• USB Output Ports: USB-A and USB-C ports for charging mobile devices.
• Input Ports: AC input, Solar/DC input for charging the power station.
• LED Light: Integrated light for illumination.
• Cooling Vents: For heat dissipation during operation.
• Handles: For easy portability.

4.2 Solar Panel Components

• Photovoltaic Cells: Convert sunlight into electrical energy.
• Output Cable (MC4): For connecting to the power station.
• Kickstands/Loops: For positioning the panels towards the sun.
• Foldable Design: For compact storage and transport.

5. Setup

5.1 Initial Charging of the Power Station

1. Upon receiving your PowerMax 2400, it is recommended to fully charge the unit before first use.
2. Connect the AC charging cable to the AC input port on the power station.
3. Plug the other end of the AC charging cable into a standard wall outlet (110V).
4. The digital display will indicate charging status and battery percentage. The unit is fully charged when the display shows 100%.

5.2 Connecting Solar Panels

1. Unfold the solar panels and position them in direct sunlight, ensuring no shadows fall on the panels. Adjust the angle for optimal sun exposure.
2. Connect the MC4 connectors from the solar panels to the provided solar charging cable (MC4 to XT60).
3. Connect the XT60 end of the solar charging cable to the Solar/DC input port on the PowerMax 2400.
4. The digital display will show the solar input power and charging status.
5. For optimal charging, ensure all four 100W panels are connected in parallel or series as per the solar cable's configuration and the power station's input specifications.

6. Operating Instructions

6.1 Powering On/Off

• To power on the unit, press and hold the main power button for 3 seconds. The display will illuminate.
• To power off the unit, press and hold the main power button for 3 seconds. The display will turn off.

6.2 Using AC Outputs

1. Press the "AC ON/OFF" button to activate the AC output ports. The AC indicator on the display will light up.
2. Plug your AC-powered devices into the AC outlets.
3. Ensure the total power consumption of your devices does not exceed the PowerMax 2400's rated output (2400W).
4. When finished, press the "AC ON/OFF" button again to turn off the AC output and conserve battery.

6.3 Using DC and USB Outputs

• DC Output: Press the "DC ON/OFF" button to activate the DC output ports (car port, DC5521). Plug in your 12V devices.
• USB Output: The USB-A and USB-C ports are typically always active when the unit is powered on. Simply plug in your USB devices for charging.
• Turn off DC output when not in use to save power.

6.4 LED Light Operation

• Press the "LED" button once to turn on the LED light.
• Press again to cycle through different brightness modes or SOS mode (if available).
• Press and hold to turn off the LED light.

7. Maintenance

• Cleaning: Use a dry, soft cloth to wipe the surface of the power station and solar panels. Do not use harsh chemicals or abrasive materials.
• Storage: If storing for an extended period, charge the unit to 50-80% every 3-6 months to prolong battery life. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: Avoid fully discharging the battery frequently. For optimal battery health, keep the battery level above 20%.
• Ventilation: Ensure cooling vents are clear of dust and debris to prevent overheating.

8. Troubleshooting

If the problem persists, please contact customer support.

9. Specifications

10. Warranty and Support

The EcoVolt OSCAL PowerMax 2400 Solar Power Station comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact EcoVolt customer service through the retailer's platform or the official EcoVolt website. Please have your purchase receipt and model number (P3200) ready when contacting support.

Manufacturer: Zhuhai Initial Entropy Energy Co., Ltd.