HOTO PixelDrive Electric Screwdriver User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your HOTO PixelDrive Electric Screwdriver, Model QWLSD014. Please read this manual thoroughly before using the product and retain it for future reference.

Product Overview

Figure 1: HOTO PixelDrive Electric Screwdriver with included 30-piece bit set and cylindrical storage case.

Key Features:

• Smart Display: Shows real-time torque levels and battery charge.
• Adjustable Torque: Six levels from 0.5 N·m to 6 N·m for various tasks.
• Dual Speed Control: 80 RPM for precision (half-press) and 200 RPM for efficiency (full-press).
• 30-Piece Bit Set: Includes 10 C6.3x25mm and 20 C6.3x50mm bits, organized in a triple-layer cylindrical case.
• Integrated LED Light: 360-degree illumination for dark or confined spaces.
• Rechargeable Battery: 2000 mAh Lithium-Ion battery with USB-C charging.

Included Components:

• 1 x HOTO PixelDrive Cordless Screwdriver
• 1 x 30-Piece Screwdriver Bit Set (10 x C6.3x25mm, 20 x C6.3x50mm)
• 1 x USB-C Charging Cable (not explicitly listed but implied by USB-C charging)

Figure 2: Exploded view illustrating the screwdriver and its organized bit storage system.

Setup

1. Charging the Screwdriver:

Before first use, fully charge the HOTO PixelDrive Electric Screwdriver. Connect the provided USB-C cable to the charging port located at the bottom of the screwdriver and plug the other end into a compatible USB power adapter (not included). The smart display will indicate the battery charge status during charging.

Figure 3: The screwdriver features a 2000 mAh battery and a convenient USB-C charging port.

2. Bit Installation:

1. Open the cylindrical bit storage case by rotating the sections.
2. Select the appropriate screwdriver bit for your task.
3. Insert the chosen bit into the magnetic bit holder at the tip of the screwdriver. Ensure it is securely seated.

Figure 4: Visual guide for opening the bit cylinder, attaching a bit, and adjusting torque.

Operating Instructions

1. Power On/Off and Torque Adjustment:

• Rotate the ring at the top of the screwdriver to select one of the six torque levels (0.5 N·m to 6 N·m). The smart display will show the selected torque.
• To turn off the screwdriver, rotate the ring to the "OFF" position.

Figure 5: The smart display provides real-time feedback on torque and battery life.

2. Speed Control (Dual Speed):

• The screwdriver features a dual-speed trigger.
• Half-Press: Activates the low speed (80 RPM) for precision work.
• Full-Press: Activates the high speed (200 RPM) for faster operation and increased productivity.

Figure 6: Dual-speed control allows for precise or rapid operation based on trigger pressure.

3. Switching Torque Units (N·m / lb-in):

To switch between Newton-meters (N·m) and Inch-pounds (lb-in) on the smart display, press and hold both the forward and reverse buttons simultaneously for 3 seconds. Wake the screen with a forward/reverse press, then adjust torque.

Figure 7: Instructions for switching between N·m and lb-in torque units on the smart display.

4. Recommended Torque Settings for Various Applications:

Figure 8: Torque level guide for various tasks and compatible bit types.

Maintenance

• Keep the screwdriver and bits clean and dry. Wipe with a soft, damp cloth.
• Store the screwdriver and bits in their original cylindrical case to prevent loss and damage.
• Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
• Regularly check the bits for wear and replace them if they become dull or damaged.

Troubleshooting

Specifications

• Model Name: QWLSD014
• Brand: HOTO
• Material: Aluminum
• Item Weight: 11.2 ounces (317 Grams)
• Product Dimensions: 1.5 x 1.5 x 7.8 inches
• Battery: 1 Lithium Ion (included), 2000 mAh
• Power Source: Battery Powered (USB-C rechargeable)
• Voltage: 4 Volts
• Torque Range: 0.5 - 6 N·m (up to 50 Inch Pounds)
• Speed: Dual-speed (80 RPM / 200 RPM)
• Special Features: Adjustable Torque, Dual-Speed Control, LED Light, Smart Display
• Included Components: 1 × PixelDrive Cordless Screwdriver, 30-Piece Screwdriver Bit Set (10 × C6.3 × 25mm, 20 × C6.3 × 50mm)

Safety Information

• Always wear appropriate safety gear, such as safety glasses, when operating power tools.
• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Use the correct bit for the application. Forcing the tool may cause damage or injury.
• Do not disassemble or modify the screwdriver. Repairs should only be performed by qualified personnel.

Official Product Videos

Warranty and Support

For warranty information and customer support, please refer to the official HOTO website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: HOTO