Introduction
Thank you for purchasing the COLAMY B6269-02 Counter Height Bar Stools. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new bar stools. Please read this manual thoroughly before assembly and retain it for future reference.
Safety Information
- Always assemble the stool according to the provided instructions.
- Ensure the stool is fully assembled and stable before use.
- Do not exceed the maximum weight limit of 250 pounds to prevent tipping or damage to the stool.
- Regularly check and tighten all screws and bolts to maintain stability.
- Avoid standing on the stool.
- Keep children away from the assembly area.
Parts List
Before beginning assembly, ensure all parts are present and undamaged. Refer to the diagram below for identification.
Figure 1: Included Components and Hardware
- Seat Cushion (A)
- Back Cushion (B)
- Upper Leg (C) x 2
- Lower Leg (D) x 2
- Wood Strip (E, F, G) x 3
- X-Metal Plate (H) x 1
- Screw Bag (I) - Contains various bolts, washers, and Allen wrench.
Assembly Instructions
Please prepare the included cross wrench before assembly. It is recommended to tighten bolts to 50% initially and fully tighten them at the final step.
Step 1: Assemble the Leg Frame Base
Install upper leg C and lower leg D. Then, place the X-metal plate H on the bottom of the legs' cross connection. Use four M6*20mm bolts to tighten them to 50%. Use the Allen wrench N.
Figure 2: Leg Frame Base Assembly
Step 2: Attach Front and Side Strips
Attach the front strip E, back strip F, and middle strip G to the leg frame. Pay attention to the screw holes direction on the strips, following the diagram for reference.
Figure 3: Attaching Wood Strips
Step 3: Secure Wood Screws
Insert six M4*35mm wood screws K into the screw holes, using your own cross wrench to tighten the screws to 50%.
Figure 4: Securing Wood Screws
Step 4: Attach Seat Cushion
Attach the seat cushion A to the finished wood frame. Use four M6*30mm bolts J, spring washer L, and flat washer M. Then tighten by Allen wrench N to 50%.
Figure 5: Attaching Seat Cushion
Step 5: Attach Back Cushion
Attach the back cushion B to the finished frame. Use two M6*20mm bolts I. Tighten by Allen wrench N to 50%.
Figure 6: Attaching Back Cushion
Step 6: Final Tightening
Tighten all screws to 100% to ensure the stool is stable and secure.
Figure 7: Final Tightening of All Screws
Step 7: Adjust Levelers
Adjust the foot levelers at the bottom of the legs to ensure the chair is level and stable on your floor surface.
Figure 8: Adjusting Foot Levelers
Your COLAMY bar stool is now successfully installed.
Operating Instructions
The COLAMY B6269-02 bar stools are designed for comfortable seating at counter height surfaces. They feature an ergonomic design with a contoured backrest and soft cushioning for extended use.
- Seating Capacity: Each stool is designed to support a maximum weight of 250 pounds.
- Footrest: Utilize the built-in footrest for enhanced comfort and stability.
- Placement: Suitable for kitchen islands, dining rooms, home bars, or similar counter-height areas.
Figure 9: Ergonomic Design Features
Figure 10: Versatile Use Cases
Maintenance
- Cleaning: Wipe the stool with a dry cloth to remove dust and spills. Avoid using harsh chemicals or abrasive cleaners, which may damage the fabric or wood finish.
- Regular Inspection: Periodically inspect all bolts and screws. Over time, they may loosen with use. Tighten them as necessary to maintain the stool's stability and prevent wobbling.
- Avoid Excessive Moisture: Protect the wood components from prolonged exposure to moisture.
- Weight Limit: Adhere strictly to the 250-pound weight limit to prevent structural damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles or feels unstable. | Loose screws or uneven floor surface. |
|
| Screws frequently loosen. | Normal wear and tear; insufficient initial tightening. |
|
| Creaking noises during use. | Loose joints or screws. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | B6269-02 |
| Product Dimensions (D x W x H) | 20.47"D x 22.05"W x 37.4"H |
| Seat Height | 25.59" (from floor to seat) |
| Backrest Height | 11.81" (from seat to top of backrest) |
| Seat Depth | 19.49" |
| Color | Camel (Z-camel) |
| Material | Wood (Frame), Polyurethane (Seat Material Type), Fabric, Sponge |
| Maximum Weight Recommendation | 250 Pounds |
| Item Weight (per stool) | 16.87 pounds |
| Assembly Required | Yes |
| Number of Pieces | 2 (per set) |
Figure 11: Product Dimensions Overview
Product Overview Video
Watch this video for a visual overview of the COLAMY B6269-02 Counter Height Bar Stools.
Video 1: COLAMY Bar Stool Product Overview. This video demonstrates the design and features of the bar stools.
Warranty Information
Specific warranty details for the COLAMY B6269-02 Counter Height Bar Stools are not provided in this manual. Please refer to your purchase documentation or contact the retailer for information regarding warranty coverage.
Customer Support
For any questions, missing parts, or assistance with assembly or use, please contact the retailer or COLAMY customer service. Contact information may be available on the product packaging or the retailer's website.
