1. Introduction
Thank you for choosing the Empava 24-Inch Built-in Dishwasher, Model BDW50. This manual provides essential information for the safe installation, operation, and maintenance of your new appliance. Please read these instructions thoroughly before using the dishwasher and retain them for future reference.
The Empava BDW50 dishwasher is designed for residential use, offering efficient cleaning with 15 place settings, 8 wash cycles, and an ultra-quiet 49 dB operation. Its stainless steel tub and auto door dry feature ensure optimal performance and convenience.
2. Safety Information
To reduce the risk of fire, electric shock, or injury when using your dishwasher, follow these basic precautions:
- Read all instructions before using the appliance.
- This appliance must be grounded. Connect only to a properly grounded outlet.
- Do not operate the dishwasher if it is damaged, malfunctioning, or has missing or broken parts.
- Keep children away from the dishwasher, especially when the door is open.
- Use only detergents and rinse agents recommended for automatic dishwashers.
- Load sharp items so they are not likely to damage the door seal or tub.
- Do not touch the heating element during or immediately after use.
- Always disconnect the appliance from the power supply before cleaning or performing maintenance.
3. Installation and Setup
Proper installation is crucial for the safe and efficient operation of your dishwasher. It is recommended that installation be performed by a qualified technician.
3.1 Unpacking
Carefully remove all packaging materials. Inspect the dishwasher for any shipping damage. Report any damage to your dealer immediately.
3.2 Dimensions and Cut-Out Requirements
Ensure your cabinet opening meets the required dimensions for a proper fit.
Figure 3.2.1: Dishwasher dimensions and recommended cabinet cut-out. The appliance measures 22.6"D x 23.8"W x 33.8"H. The cut-out should be 33 7/8" to 35" H x 23 7/8" to 24" W x 24" D.
3.3 Connections
All connections (drain, inlet, electrical) are located at the rear of the appliance. Ensure proper access and secure connections.
Figure 3.3.1: Rear view of the dishwasher showing connection points for drain hose (B), inlet (C), and electrical (E). A junction box for hardwired connection is available as an accessory.
3.3.1 Electrical Connection
The dishwasher requires a 120V, 60Hz, dedicated electrical supply. Ensure the circuit is properly grounded.
3.3.2 Water Supply Connection
Connect the dishwasher to a hot water supply line with a minimum temperature of 120°F (49°C) and a maximum of 149°F (65°C).
3.3.3 Drain Connection
Connect the drain hose to the household drain system. Ensure the drain hose is properly secured to prevent leaks.
3.4 Included Components for Installation
The following components are included to assist with installation:
- Drain Hose, Hose Clamp
- Mounting Brackets, Screws
- Door Correction Cover
- Steam Proof Film
4. Operating Instructions
Familiarize yourself with the control panel and basic operation before first use.
4.1 Control Panel Overview
The dishwasher features a hidden top control panel for a sleek, integrated look.
Figure 4.1.1: Top-mounted control panel with various cycle and option buttons, and a digital display.
4.2 Basic Operation Steps
- Load the Dishwasher: Refer to Section 5 for proper loading techniques.
- Add Detergent and Rinse Aid: Fill the detergent dispenser and rinse aid dispenser.
- Select a Wash Cycle: Press the desired cycle button (e.g., Auto, Heavy, Normal).
- Select Options (Optional): Choose additional options like Half Load or High Temp.
- Start the Cycle: Close the dishwasher door firmly. The cycle will begin.
- Auto Door Dry: At the end of the cycle, the door will automatically open to facilitate drying.
5. Loading the Dishwasher
Proper loading ensures optimal cleaning performance and prevents damage to dishes. The Empava BDW50 offers 15 place settings and three racks for flexible loading.
5.1 Third Rack (Utensils)
The third rack is ideal for cutlery, small utensils, and espresso cups.
Figure 5.1.1: The third rack designed for organizing cutlery and small items, ensuring thorough cleaning.
5.2 Upper Rack
The upper rack is suitable for glasses, cups, small bowls, and plates. Ensure items do not block the spray arms.
Figure 5.2.1: The upper rack, shown loaded with various glassware and smaller plates, demonstrating efficient space utilization.
5.3 Lower Rack
The lower rack is designed for larger items such as dinner plates, serving dishes, pots, and pans.
Figure 5.3.1: The lower rack, configured to hold larger items like pots, pans, and dinner plates.
6. Wash Cycles and Options
The Empava BDW50 offers 8 wash cycles and 6 custom options to accommodate various dishwashing needs.
6.1 Available Wash Cycles
- Auto: Automatically detects soil level and adjusts wash time and temperature.
- Heavy: For heavily soiled dishes, pots, and pans.
- ECO: Energy-efficient cycle for normally soiled dishes.
- Normal: Standard cycle for everyday dishes.
- Delicate: Gentle wash for fragile items.
- Lightning: Quick wash for lightly soiled dishes.
- Glass: Specialized cycle for glassware.
- Rinse: For rinsing dishes that will be washed later.
6.2 Custom Options
- Delay: Postpones the start of the wash cycle.
- Sanitize: Uses high temperature to sanitize dishes.
- High Temp: Increases wash temperature for improved cleaning.
- Half Load: Reduces water and energy consumption for smaller loads.
- Child Lock: Locks the control panel to prevent accidental operation.
- Auto Program: Automatically selects the best wash program.
7. Maintenance and Care
Regular maintenance helps ensure the longevity and optimal performance of your dishwasher.
7.1 Cleaning the Exterior
Wipe the exterior surfaces with a soft, damp cloth. For stainless steel, use a specialized stainless steel cleaner to prevent streaks and fingerprints.
7.2 Cleaning the Interior
Periodically clean the interior of the dishwasher. You can run an empty cycle with a dishwasher cleaner or a cup of white vinegar placed in the bottom rack.
7.3 Filter Maintenance
The dishwasher features a removable filter system. Regularly check and clean the filter to prevent food particles from recirculating and affecting wash performance. Refer to the detailed instructions in the full user manual for filter removal and cleaning.
8. Troubleshooting
Before contacting customer service, review the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power supply issue, door not closed properly, cycle not selected. | Check power connection, ensure door is latched, select a wash cycle. |
| Dishes are not clean | Improper loading, clogged filter, insufficient detergent, blocked spray arms. | Reload dishes correctly, clean filter, use recommended detergent, ensure spray arms rotate freely. |
| Water not draining | Clogged drain hose or filter, air gap issue. | Check and clear drain hose/filter, inspect air gap if applicable. |
| Dishwasher is noisy | Improper loading, foreign object in pump, installation issue. | Ensure dishes are not rattling, check for foreign objects, verify proper installation. |
9. Specifications
Detailed technical specifications for the Empava BDW50 Dishwasher.
| Feature | Specification |
|---|---|
| Model | BDW50 |
| Installation Type | Built-In |
| Product Dimensions (D x W x H) | 22.6" x 23.8" x 33.8" |
| Capacity | 15 Place Settings |
| Noise Level | 49 dB |
| Wash Cycles | 8 (Auto, Heavy, ECO, Normal, Delicate, Lightning, Glass, Rinse) |
| Special Features | Adjustable Basket, Auto Program, Half Load, Low Water Usage, Quick Wash, Auto Door Dry |
| Material | Stainless Steel Tub |
| Controls Type | Touch (Top Control) |
| Voltage | 120 Volts |
| Energy Consumption | 220 Kilowatt Hours Per Year (Estimated) |
| Energy Efficiency | ENERGY STAR 7.0 Certified |
| Water Consumption | 3.2 Gallons Per Load |
| Item Weight | 75 Pounds |
The Empava BDW50 is ENERGY STAR certified, indicating high energy efficiency.
Figure 9.1.1: ENERGY STAR certification logo and Energy Guide label, highlighting the dishwasher's energy efficiency and estimated yearly energy cost.
10. Warranty and Support
For warranty information or technical assistance, please contact Empava customer support. Details regarding your product's warranty coverage can typically be found on the manufacturer's website or in the warranty card included with your purchase.
For customer support, please visit the official Empava website or refer to the contact information provided in your purchase documentation.
