LORDONE 24V 6.0Ah Lithium-Ion Replacement Battery User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use, charging, and maintenance of your LORDONE 24V 6.0Ah Lithium-Ion Replacement Batteries. Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other serious injury.

• Do not disassemble, crush, or solder the battery.
• Do not throw the battery into fire or water.
• Do not short-circuit the battery terminals.
• Keep the battery away from children and pets.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• Use only compatible chargers specified for 24V Lithium-Ion batteries.
• If the battery shows signs of damage, leakage, or overheating, discontinue use immediately and dispose of it properly.

3. Product Overview

The LORDONE 24V 6.0Ah Lithium-Ion Replacement Battery is designed to provide reliable power for compatible Snow Joe and Sun Joe 24V tools. It features a high-capacity design for extended runtime and includes multiple built-in protection systems.

This image displays two LORDONE 24V 6.0Ah Lithium-Ion replacement batteries, highlighting their key specifications: 6.0Ah capacity, 24V voltage, and Li-ion cell type.

Key Features:

• Voltage: 24V
• Capacity: 6.0Ah (6000mAh)
• Battery Type: Lithium-Ion
• Electricity LED Display: Indicates current charge level.
• Multiple Protection System: Includes over-charge, over-discharge, over-voltage, over-current, and over-heating protection.

A bar chart visually compares the 6.0Ah capacity of the LORDONE battery to other lower capacity batteries (2.5Ah, 3.0Ah, 4.0Ah, 5.0Ah), demonstrating its extended running time.

This image provides a detailed view of the LORDONE 24V 6.0Ah battery, showing its dimensions (3.07 in height, 2.95 in width, 5.2 in length), an Electricity LED Display, Charger Port, and Durable Shell. It also highlights built-in protections: Short-circuit Protection, Over voltage Protection, Over charge Protection, and Over heating Protection.

4. Compatibility

These replacement batteries are compatible with the following Snow Joe and Sun Joe 24V series tools and iON+ system products:

• 24V-SS10, 24V-SS11-XR, 24V-SS13, 24V-SS13-RM
• 24V-JB-LTE, 24V-PS8-LTE, 24V-PS10-LTE
• 24V-SSEG-CT, 24V-CSSHRP-CT, 24V-PP350-BDL
• 24V-GT10-LTE, 24V-ST14B-CT, 24V-10CS
• 24V-HCS-LTE, 24V-HT22-CT
• 24V-X2-20SB-CT, 24V-X2-20SB, 24V-X2-SB18, 24V-X2-PW1200, 24V-X2-TLR14-CT, 24V-X2-SB15, 24V-X2-CS16, 24V-X2-SB22, 24V-X2-17LM-CT, 24V-X2-21LM, 24V-WSB-LTE power tools.

They are also designed as replacements for iON+ 24VBAT-LTW/LTX/LTE/LT/XR Series Battery.

This image illustrates the broad compatibility of the 6.0Ah LORDONE replacement battery with a range of 24V iON+ system cordless power tools from Snow Joe and Sun Joe, including drills, leaf blowers, chainsaws, and snow blowers.

5. Setup

5.1 Initial Charging

Before first use, fully charge the battery. Refer to the 'Charging' section for detailed instructions.

5.2 Installing the Battery

1. Ensure the power tool is turned off and disconnected from any power source.
2. Align the battery with the battery port on your compatible Snow Joe or Sun Joe 24V tool.
3. Slide the battery into the port until it clicks securely into place. Ensure it is firmly seated to prevent accidental dislodgement during operation.

This image demonstrates the ease of installation of the LORDONE 24V 6.0Ah battery into a compatible cordless power tool, showing a hand sliding the battery into place.

6. Operating

6.1 Powering the Tool

Once the battery is securely installed, operate your power tool according to its specific user manual. The battery provides consistent power throughout its discharge cycle due to its Lithium-Ion technology.

6.2 Monitoring Charge Level

The battery features an Electricity LED Display. Press the button on the battery to view the current charge level. The number of illuminated LEDs indicates the remaining charge.

7. Charging

7.1 Compatible Chargers

Use only original or compatible 24V chargers such as 24V-2AMP-SK1R Starter Fast Charger, 24VCHRG-AC, or 24VCHRG-QC chargers.

The image shows a LORDONE 24V 6.0Ah battery placed on a charger, indicating compatibility with 24V-2AMP-SK1R Starter Fast Chargers, as well as 24VCHRG-AC or 24VCHRG-QC chargers.

7.2 Charging Procedure

1. Insert the battery into the compatible charger. Ensure it is properly seated.
2. Connect the charger to a standard power outlet.
3. The charger's indicator lights will show the charging status. Refer to your charger's manual for specific light patterns.
4. Once fully charged, remove the battery from the charger.

8. Maintenance

8.1 Storage

For optimal battery life, store batteries in a cool, dry place between 50°F (10°C) and 70°F (21°C). Avoid storing in direct sunlight or areas with extreme temperatures. If storing for extended periods, charge the battery to approximately 50% capacity.

8.2 Cleaning

Clean the battery and its terminals with a dry, soft cloth. Do not use water or cleaning solvents.

8.3 Battery Care

Lithium-Ion batteries do not suffer from memory effect. It is not necessary to fully discharge them before recharging. Regular charging and avoiding complete discharge can prolong battery life.

9. Troubleshooting

10. Specifications

• Model: SJ 24V 6.0
• Voltage: 24V
• Capacity: 6.0Ah (6000mAh)
• Battery Type: Lithium-Ion
• Product Dimensions: 7 x 5.5 x 3.46 inches
• Item Weight: 3.41 pounds
• Manufacturer: LORDONE

11. Warranty and Support

LORDONE offers customer service and a money-back guarantee. For any questions or support needs, please contact LORDONE customer service. Refer to your purchase documentation for specific warranty terms and contact information.