1. Introduction and Overview
The iGarden K Series 6H Cordless Robotic Pool Vacuum is designed to provide efficient and hassle-free cleaning for both inground and above-ground pools. Featuring advanced AI navigation, smart controls, and a powerful cleaning system, this robotic cleaner ensures comprehensive coverage of your pool's floor, walls, and waterline. Its cordless design eliminates the need for tangled cables, offering greater convenience and safety.
2. Key Features
- Extended Battery Life: The K Series offers up to 6 hours of continuous cleaning on a single charge, or 3.5 hours for combined floor, wall, and waterline cleaning. With standard maintenance cycles (1-hour cleaning every three days), a single charge can provide up to 10 days of clean-pool performance.
- Powerful Cleaning Performance: Equipped with a turbine-grade impeller, optimized flow system, and three brushless motors, the cleaner delivers strong circulation and suction. The Turbo 200% Mode provides an instant power boost for stubborn stains and heavy debris. Dual rubber brushes and anti-slip tracks ensure stable climbing and thorough coverage.
- Intelligent Navigation: Advanced 3D S-shaped path planning technology optimizes cleaning routes in real-time, achieving up to 5X greater efficiency than standard cleaners. Adaptive torque control allows the robot to navigate steps, slopes, and walls for continuous operation.
- Smart Control Options: The K Series features a smartphone-grade full-screen touch interface for direct control over cleaning modes, AI timers, and cycles. Additionally, the iGarden Robotics App allows for remote control, runtime adjustments, scheduling AI cycles, and activating Turbo 200% Mode. (Note: App settings must be completed on land, as wireless signals do not work underwater.)
- Efficient Filtration System: A 4L mega-capacity filter basket with a precision 180µm mesh captures sand, dirt, leaves, and micron-sized particles, reducing filter cleaning frequency by up to 50%.
- Comprehensive Coverage: Designed to clean floors, walls, and waterlines, ensuring 360° full pool coverage.
3. Setup
3.1 Unboxing
Upon opening the package, ensure all components are present:
- iGarden Pool Cleaner K Series Robotic Unit
- User Manual
- AC Power Adapter
- Hook (pole not included, compatible with standard 1¼" (32 mm) poles)
Image: Contents of the iGarden K Series package, showing the robotic cleaner, user manual, AC power adapter, and hook.
3.2 Initial Charging
Before first use, fully charge the robotic cleaner using the provided AC Power Adapter. A full charge typically takes approximately 5 hours. The charging port is located on the unit. Ensure the port is dry before connecting the charger.
3.3 App Installation
Download the iGarden Robotics App from your smartphone's app store. Follow the in-app instructions to pair your device and configure initial settings. Remember to complete all app settings on land, as wireless signals do not work underwater.
4. Operating Instructions
4.1 Powering On/Off
The robotic cleaner features a touchscreen interface on its top panel. Press and hold the power button icon for a few seconds to turn the unit on or off. The display will illuminate to indicate power status and selected modes.
Image: The touchscreen interface of the iGarden K Series, displaying battery level and cleaning mode options.
4.2 Selecting Cleaning Modes
Use the touchscreen or the iGarden Robotics App to select your desired cleaning mode:
- Floor Only: Cleans only the bottom surface of the pool.
- Walls & Waterline Only: Focuses on vertical surfaces and the waterline.
- Full Coverage: Cleans all surfaces – floor, walls, and waterline.
- Walls & Waterline First, then Floor: Prioritizes vertical cleaning before moving to the pool floor.
Image: The iGarden K Series showcasing its four intelligent cleaning modes for comprehensive pool coverage.
4.3 AI Timer and Turbo Mode
Set the AI Timer via the touchscreen or app for automated cleaning cycles (e.g., every 24h, 48h, or 72h). Activate Turbo 200% Mode for an instant power boost to tackle heavily soiled areas.
4.4 Placing the Cleaner in the Pool
Gently submerge the cleaner into the pool, preferably in a corner. Hold it for approximately one minute to allow it to fill with water and activate its sensors. The robot will then begin its cleaning cycle according to your selected settings. The smart navigation system will map the pool and optimize its route. Upon completion of its cycle or when the battery is low, the cleaner will automatically park itself near a wall for easy retrieval.
Video: The iGarden K Series robotic pool cleaner operating in a pool, demonstrating its ability to move and clean the pool steps and floor.
Video: A user demonstrating how to place the iGarden K Series into the pool and its initial movements, including wall climbing and navigation.
5. Maintenance
5.1 Cleaning the Filter Basket
Regularly clean the 4L mega-capacity filter basket to maintain optimal cleaning performance. To access the filter, open the top cover of the robotic cleaner. Remove the basket and rinse it thoroughly with a hose to clear all collected debris. Ensure the filter is clean and dry before reinserting it into the unit.
Image: The iGarden K Series with its large filter basket open, showing collected leaves, hair, twigs, gravel, and sand.
Image: Visual guide illustrating the simple process of removing, emptying, and rinsing the filter basket for maintenance.
6. Specifications
| Brand | iGarden |
| Model Name | K Series |
| Material | Acrylonitrile Butadiene Styrene (ABS), PC |
| Color | Black |
| Product Dimensions | 19.25"L x 15.31"W x 9.45"H |
| Power Source | Battery Powered |
| Battery Life | 6 Hours |
| Control Method | App |
| Charging Time | 5 Hours |
| Filter Capacity | 4L |
| Filter Mesh Size | 180µm |
7. Warranty and Support
The iGarden K Series Robotic Pool Vacuum comes with a 3-Year Full Machine Replacement Protection plan. This warranty covers major motor failures with a full unit replacement (no repairs). For any questions or assistance, 24/7 phone support is available to resolve issues instantly. In-app support via email, phone, and live chat is also provided.
Image: iGarden Care details, highlighting the 3-year full machine replacement warranty and 24/7 customer support.
