1. Product Overview
This manual provides instructions for the assembly, operation, and maintenance of your LUXOAK 3-piece farmhouse bedroom furniture set. The set includes one full-size bed frame with a 49-inch tall headboard and two nightstands, each equipped with a charging station.
Figure 1.1: Complete LUXOAK Farmhouse Bedroom Set
2. Safety Information
WARNING: Always secure the furniture to the wall using anti-tipping devices to prevent tip-overs. Follow the assembly instructions carefully to ensure the furniture is properly assembled and stable. Failure to do so can result in serious injury or death.
Keep all small parts and packaging materials away from children. Ensure all connections are tight before use. Do not stand on the bed frame or nightstands.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Full Size Bed Frame with 49" Tall Headboard
- Two (2) Nightstands with Integrated Charging Stations
- Assembly Hardware Kit (screws, bolts, tools, anti-tipping devices)
- Instruction Manual
Figure 3.1: Product Dimensions and Components
4. Setup and Assembly
Assembly requires multiple steps and tools (included). Two persons are recommended for safe and efficient assembly. Please follow the detailed instructions provided in the separate assembly guide for each component.
4.1. Bed Frame Assembly
- Unpack all bed frame components and lay them out on a clean, soft surface to prevent scratches.
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Install the center support beam and legs.
- Place the melamine slats onto the bed frame. Ensure they are evenly spaced and secured according to the instructions. The bed frame features a silent design and firm ribbons for slat stability.
- Once assembled, position the bed frame in its desired location.
Figure 4.1: Bed Frame Slat System Features
4.2. Nightstand Assembly
- Unpack all nightstand components.
- Assemble the nightstand frame according to the instructions.
- Install the two soft-close drawers. Ensure the drawer slides operate smoothly.
- Attach the stainless steel feet to the base of the nightstand.
- Integrate the charging station by connecting the power cord.
Figure 4.2: Nightstand with Drawers
4.3. Anti-Tipping Device Installation
It is highly recommended to install the provided anti-tipping devices for both nightstands to prevent accidental tip-overs. Follow the specific instructions included with the anti-tipping hardware to secure the nightstands to a wall stud.
5. Operating Instructions
5.1. Charging Station Usage
Each nightstand is equipped with an integrated charging station featuring standard AC outlets and USB ports.
- Plug the nightstand's 4.9-foot power cord into a standard wall outlet.
- To charge devices, plug your device's power adapter into the AC outlet (125V/12A) or a USB cable into one of the USB ports (5V/2.1A).
- Ensure devices are properly connected and charging indicators (if any) are active.
Figure 5.1: Nightstand Charging Station
6. Maintenance
To ensure the longevity and appearance of your furniture set, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the woodgrain finish.
- Spills: Clean spills immediately to prevent staining.
- Hardware: Periodically check and tighten all screws and bolts to maintain structural integrity.
- Charging Station: Keep the charging ports free of dust and debris. Do not overload the outlets.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading.
7. Troubleshooting
7.1. Bed Frame Issues
- Squeaking Noises: Check all bolts and screws for tightness. Ensure slats are properly seated and not rubbing against the frame.
- Mattress Shifting: Verify that the thick side rails are correctly installed and the mattress is centered on the frame.
7.2. Nightstand Issues
- Drawers Not Closing Smoothly: Inspect drawer slides for obstructions or misalignment. Ensure all assembly hardware for the drawers is tight.
- Charging Station Not Working:
- Ensure the nightstand's power cord is securely plugged into a functional wall outlet.
- Check if the device being charged is properly connected to the AC outlet or USB port.
- Test the wall outlet with another appliance to confirm it has power.
- Avoid overloading the charging station with too many high-power devices simultaneously.
8. Specifications
| Brand | LUXOAK |
| Model Number | BMB022+CNS019 |
| Material | Engineered Wood |
| Color | Black |
| Style | Farmhouse |
| Bed Frame Dimensions (L x W x H) | 77.2" x 54.3" x 49" |
| Nightstand Dimensions (W x D x H) | 19.7" x 15.8" x 23.8" |
| Bed Frame Under-bed Clearance | 12.2" (approximate) |
| Item Weight | 200 pounds (total set) |
| Nightstand AC Outlet | 125V/12A |
| Nightstand USB Ports | 5V/2.1A |
| Nightstand Power Cord Length | 4.9 feet |
9. Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or contact the LUXOAK customer service department. Keep your purchase receipt for warranty claims.
Contact Information: Please visit the official LUXOAK website or refer to your purchase platform for the most current customer support contact details.