BENYAR 5218 Luxury Men's Automatic Watch Instruction Manual

1. Introduction

Thank you for choosing the BENYAR 5218 Luxury Men's Automatic Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure long-lasting performance and enjoyment of your watch.

2. Product Overview

The BENYAR 5218 is an automatic mechanical watch featuring a 40mm dial, stainless steel strap, and luminous elements for visibility in low light. Its design combines classic elegance with modern functionality.

Image: Angled view of the BENYAR 5218 Automatic Watch, showcasing its stainless steel case and bracelet, and the dial.

Materials:

• Case Material: Alloy
• Bracelet Material: Stainless Steel
• Dial Window: Hardlex

Image: Rear view of the BENYAR 5218 watch, displaying the transparent caseback that reveals the intricate automatic mechanical movement.

Key Features:

• Automatic self-winding mechanical movement.
• Luminous hands and markers for readability in low light conditions.
• Durable stainless steel strap with a foldover clasp and push button.
• Life waterproof design suitable for daily activities.

Image: The BENYAR 5218 watch dial illuminated in the dark, highlighting the luminous hands and hour markers for clear visibility.

3. Setup

3.1 Initial Winding

As an automatic watch, it is powered by the motion of your wrist. If the watch has stopped or has not been worn for an extended period, it may require manual winding to initiate movement. To manually wind, rotate the crown clockwise approximately 20-30 times while it is in its normal, pushed-in position. This will provide enough power reserve to start the watch.

3.2 Setting the Time

1. Gently pull the crown out to the first position.
2. Rotate the crown to adjust the hour and minute hands to the correct time.
3. Once the time is set, push the crown back into its original position to secure it and start the watch movement.

Image: Close-up side view of the BENYAR 5218 watch, highlighting the crown used for winding and setting the time.

3.3 Strap Adjustment

The package includes a strap adjuster tool. You can use this tool to remove extra links from the stainless steel bracelet to achieve a comfortable fit for your wrist. If you are unsure, it is recommended to seek professional assistance for strap adjustment.

4. Operating the Automatic Movement

Your BENYAR 5218 watch is equipped with an automatic mechanical movement. This means it does not require a battery. The movement is powered by the natural motion of your arm and wrist throughout the day. A rotor inside the watch winds the mainspring as you move.

Daily Wear:

For consistent timekeeping, it is recommended to wear the watch for a sufficient period each day to ensure the automatic winding mechanism operates effectively. If the watch is not worn for an extended duration, it may stop and require manual winding as described in Section 3.1.

Image: The BENYAR 5218 watch displayed on a man's wrist, illustrating its fit and appearance during wear.

5. Maintenance

5.1 Water Resistance Precautions

The watch is designed to be life waterproof, suitable for daily activities such as hand washing, face washing, and rain exposure. However, please observe the following precautions:

• Do not press any buttons or operate the crown underwater.
• Avoid using the watch in extremely hot or cold temperatures, as this can affect the seals.
• This watch is not suitable for diving or prolonged submersion in water. Excessive water immersion will shorten the service life of the watch.

5.2 Cleaning

It is highly recommended to clean the watch strap and case regularly with a soft, dry cloth to remove dirt and oils. Avoid using harsh chemicals or abrasive materials.

5.3 General Care

Store your watch in a dry place away from direct sunlight and strong magnetic fields when not in use. The color of the watch may vary slightly due to light effects in different environments.

6. Troubleshooting

If you encounter any issues with your BENYAR 5218 watch, please consider the following common solutions:

• Watch Not Running: Ensure the watch is sufficiently wound. If it has been stationary, manually wind it (Section 3.1) or wear it for several hours to allow the automatic movement to build power reserve.
• Time Inaccuracy: Automatic mechanical watches may exhibit slight variations in timekeeping. If the inaccuracy is significant, ensure the watch is fully wound and has not been exposed to strong magnetic fields.
• Strap Discomfort: Use the provided strap adjuster to ensure the bracelet fits your wrist comfortably.

For any persistent problems or concerns, please refer to the Warranty and Support section for contact information.

7. Specifications

8. Warranty and Support

Your BENYAR 5218 watch comes with a product manual, cleaning cloth, and a chain removal tool. If you encounter any problems during the use of your watch, please do not hesitate to contact us. Our customer support team is available to assist you with any questions or issues.

For support, please refer to the contact information provided with your purchase or visit the official BENYAR website.

9. Product Video