Generic E26/E27 Motion Sensor Light Socket Adapter User Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Generic E26/E27 Motion Sensor Light Socket Adapter. This device is designed to provide automatic, energy-efficient lighting by detecting motion and ambient light conditions.

Product Features

Advanced Radar Motion Detection: Utilizes millimeter-wave radar technology for 360° motion detection, offering superior accuracy and reliability compared to traditional infrared sensors.
Automatic Dusk-to-Dawn Operation: Automatically turns lights on at dusk and off at dawn, providing seamless illumination based on ambient light.
Energy-Saving: Detects human movement to activate lighting, saving up to 80% in energy consumption by only turning on when needed.
Wide Detection Range: Features a detection range of 6.5 to 26 feet (2-8 meters) and can detect signals through certain non-metallic obstacles.
Enhanced Safety: Automatically illuminates dark areas like staircases, hallways, and garages, reducing the risk of accidents.
Easy Installation: Compatible with standard E26/E27 sockets, supporting various bulb types (LED, CFL, or Halogen) up to 60W (30W max for halogen). No rewiring required.

Package Contents

1 x Motion Sensor Light Socket Adapter

Specifications

Model	B0FJXY77P3
Socket Type	E26/E27
Voltage	AC100-260V
Max Wattage	60W (LED/CFL), 30W (Halogen)
Detection Technology	Millimeter-wave Radar
Detection Angle	360°
Detection Range	6.5 to 26 feet (2-8 meters)
Auto-Off Delay	Approximately 30 seconds after motion ceases
Material	Plastic
Dimensions	2" (W) x 3.5" (H) (52mm x 90mm)
Color	White

Image: Dimensions and technical specifications of the E26/E27 Motion Sensor Light Socket Adapter.

Image showing compatibility with various bulb types including LED, CFL, and Tungsten bulbs, highlighting energy savings.

Image: Compatible bulb types and energy saving benefits.

Setup and Installation

Power Off: Before installation, ensure the power to the light fixture is turned off at the circuit breaker to prevent electrical shock.
Screw in Adapter: Carefully screw the motion sensor light socket adapter into your existing E26 or E27 light fixture. Ensure it is securely tightened.
Install Bulb: Screw your compatible light bulb (LED, CFL, or Halogen, up to 60W/30W respectively) into the motion sensor adapter.
Power On: Restore power to the light fixture at the circuit breaker.
Testing: The light should turn on automatically when motion is detected in low-light conditions and turn off after approximately 30 seconds of no motion.

Step-by-step visual guide on how to install the motion sensor light socket adapter between a standard E26 lamp holder and a light bulb.

Image: Installation steps for the motion sensor light socket adapter.

Important Installation Notes:

The adapter is designed for indoor use or in protected outdoor fixtures where it is not directly exposed to weather.
Ensure the adapter is installed in a location where its sensor has an unobstructed view of the area to be monitored.
The socket cannot work effectively in a closed lampshade that obstructs the sensor or prevents it from detecting ambient light. Ensure it can detect ambient light for proper dusk-to-dawn functionality.
In smaller enclosed spaces, continuous motion detection may occur due to reflections, causing the light to remain on. Consider placement carefully in such environments.

Image illustrating various suitable locations for the motion sensor light socket adapter such as corridors, staircases, garages, and basements, with a note about avoiding closed lampshades.

Image: Recommended installation locations and a caution regarding closed lampshades.

Operating Instructions

The Motion Sensor Light Socket Adapter operates automatically based on motion detection and ambient light levels. No manual adjustments are typically required after installation.

Automatic On: When ambient light levels are low (dusk or dark conditions), the light will automatically turn on if motion is detected within its 360° detection range.
Automatic Off: The light will remain on as long as motion is continuously detected. Approximately 30 seconds after the last detected motion, the light will automatically turn off.
Dusk-to-Dawn Functionality: The adapter will only activate motion sensing when it is dark enough. During daylight hours, the light will remain off regardless of motion.

Diagram illustrating the motion detection process: light turns on when motion is detected, remains on with continuous motion, and turns off when motion ceases.

Image: How the motion sensor light socket adapter detects motion and controls lighting.

Image showing two motion sensor light socket adapters and indicating a 30-second auto-off delay after motion stops.

Image: The automatic 30-second light off feature.

Maintenance

Cleaning: Ensure the sensor surface is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
Bulb Replacement: If the light bulb needs replacement, ensure the power is turned off at the circuit breaker before unscrewing the old bulb and installing a new one.
Environmental Conditions: Avoid exposing the adapter to extreme temperatures, high humidity, or direct water contact, as this can affect performance and durability.

Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	No power to the fixture. Bulb is faulty or not screwed in properly. Ambient light is too bright (dusk-to-dawn sensor). Sensor is obstructed or dirty. No motion detected.	Check circuit breaker and wall switch. Replace bulb or ensure it is securely tightened. Test in darker conditions. Clean sensor surface; ensure no obstructions. Move within the detection range.
Light stays on continuously.	Continuous motion detected. Installed in a small, enclosed space causing reflections. Sensor malfunction.	Ensure no constant movement in the detection area. Relocate the adapter to a more open space or adjust its orientation. Contact customer support if problem persists after checking other causes.
Light turns on/off erratically.	Intermittent motion. Fluctuating ambient light. Interference from other devices.	Observe the environment for sources of intermittent motion. Ensure stable light conditions around the sensor. Relocate if possible to avoid interference.

Warranty and Support

This product has a standard factory defect rate. If the radar sensor does not function as expected, please contact the seller for assistance or a replacement. Ensure proper installation for optimal performance and longevity of the product.

For further support, please refer to the contact information provided by your retailer or the manufacturer, bluedery.

	eSenlite EE101WLS: Invisible Motion Activated Retrofit Lamp Socket - Q&A and Troubleshooting Guide Detailed Q&A and troubleshooting guide for the eSenlite EE101WLS, an invisible motion-activated retrofit lamp socket. This radar sensor adapter enhances existing E26/E27 fixtures with smart, energy-saving lighting capabilities for indoor and outdoor use, featuring dusk-to-dawn control and dimmable options. Learn about its benefits over PIR sensors and how to set it up effectively.
	Jewenwils Light Sensor Socket Instruction Manual This manual provides instructions for the Jewenwils Light Sensor Socket, detailing its functions, operating instructions, and specifications. Learn how to use the light sensing, timing, and random modes for optimal outdoor lighting control.
	Dusk To Dawn LED Bulb Light User Manual - Installation and Operation Guide User manual for the Dusk To Dawn LED Bulb Light, detailing installation, how it works, and important safety warnings. Features automatic dusk-on, dawn-off functionality for various outdoor and indoor locations.
	Halo E27 Lamp Holder Instruction Manual Instruction manual for Halo Design E27 lamp holders, including models for Sort (Black), Antik messing (Antique Brass), and Silver. Provides assembly and installation guidance.
	E27 PIR Motion Sensor Light Bulb Holder - 360° Detection, Adjustable Time & Lux Discover the E27 PIR Motion Sensor Light Bulb Holder, featuring 360° detection, adjustable delay time, and ambient light sensitivity. Ideal for automatic lighting in various spaces. Learn about its features, specifications, and installation.
	EcoSmart BR30 Motion and Dusk to Dawn Sensor Bulb: Use and Care Guide This guide provides detailed instructions for the EcoSmart BR30 Motion and Dusk to Dawn Sensor Bulb (Model 14BR3065WCCTM0). Learn about color temperature settings, motion sensor configurations, installation, performance tips, and FCC compliance information.

E26/E27 Motion Sensor Light Socket Adapter B0FJXY77P3