1. Product Overview
The PALONE LT808S Solar Bug Zapper is designed for effective insect control in both indoor and outdoor environments. It features a dual-functionality with white light for illumination and UV light for attracting and eliminating insects. The device offers versatile charging options, including solar power and USB-C, ensuring continuous operation.
Image 1: Exploded view of the PALONE Solar Bug Zapper, highlighting components like the hanging hoop, top solar panel, built-in battery, switch button, Type-C port, LED lamp, high-voltage power grid, ABS protective net, and removable tray.
2. Package Contents
Please verify that all items are present in the package:
- PALONE Solar Bug Zapper Unit
- External Solar Panel (4W with 3.5-meter cable)
- USB-C Charging Cable
- Cleaning Brush
- Ground Stake for External Solar Panel
- Instruction Manual
Image 2: The PALONE Solar Bug Zapper, its external solar panel, USB-C cable, cleaning brush, ground stake, and instruction manual, as included in the package.
3. Setup
3.1 Initial Charging
Before first use, fully charge the bug zapper using the provided USB-C cable. Connect the cable to the Type-C port on the device and a compatible USB power source. A full charge typically takes 2-3 hours.
Image 3: The bug zapper connected to a wall adapter via its USB-C charging cable.
3.2 Solar Panel Placement
The bug zapper has a built-in top solar panel for passive charging. For enhanced charging and extended operation, utilize the external 4W solar panel. This panel comes with a 3.5-meter cable, allowing flexible placement in direct sunlight. It can be mounted on a wall or staked into the ground using the included accessories. Ensure the panel's angle is adjusted for optimal sun exposure.
Image 4: The bug zapper placed outdoors with its external solar panel mounted on a wall, demonstrating solar charging.
Image 5: Close-up of the external solar panel, showing its ground stake and adjustable angle feature.
4. Operating Instructions
4.1 Power On/Off and Mode Selection
The device features a switch button to select between two modes: white light illumination and UV bug zapper mode. Locate the switch on the side of the unit near the top.
- To activate Illumination Mode (White Light): Slide the switch to the left. This mode provides general lighting.
- To activate Bug Zapper Mode (UV Light): Slide the switch to the right. This mode uses UV light to attract and eliminate insects.
- To turn the device OFF: Position the switch in the center.
Image 6: The bug zapper displaying its two functional modes: white light for illumination and blue UV light for insect zapping.
4.2 Light Control Function
The bug zapper has a light-sensitive function. It will automatically turn on at night and turn off during the day when sufficient light is detected by the top solar panel. If you wish to operate the bug zapper during daylight hours or in a well-lit area, you must cover the top solar panel or invert the device to simulate darkness.
Image 7: The bug zapper showing its light-sensitive feature, where it charges in daylight and activates in darkness, or can be manually activated by covering the solar panel.
4.3 Placement and Usage
The PALONE bug zapper is suitable for various indoor and outdoor settings. It can be hung using its integrated hoop or placed on a flat surface. Avoid placing the solar panel flat on the ground in areas with high temperatures to prevent damage.
Image 8: Examples of the bug zapper being used in different environments such as a kitchen, bedroom, picnic, and camping site.
5. Maintenance
5.1 Cleaning the Bug Zapper
Regular cleaning is essential to maintain the efficiency of your bug zapper. Dead insects can accumulate on the high-voltage grid, reducing its effectiveness. Follow these steps to clean the device:
- Ensure the device is turned OFF before cleaning.
- Remove the bottom tray by rotating it counter-clockwise.
- Use the provided cleaning brush to dislodge any trapped insects from the grid and the tray.
- Rinse the tray with water.
- Wipe the tray dry and reinstall it by rotating clockwise until secure.
- For stubborn debris on the grid, a leaf blower or a small rechargeable blower can be used to clear it. Ensure you are upwind to avoid contact with dislodged insect remains.
Image 9: A four-step visual guide demonstrating how to remove, clean, and reattach the bug zapper's collection tray.
6. Troubleshooting
- Device not turning on at night:
- Ensure the switch is in either Illumination or Bug Zapper mode, not in the OFF position.
- Verify the top solar panel is not obstructed and receives adequate sunlight during the day for charging.
- Check if the battery is sufficiently charged. If not, charge via USB-C.
- Reduced bug zapping effectiveness:
- The high-voltage grid may be clogged with dead insects. Refer to Section 5.1 for cleaning instructions.
- Ensure the device is placed in an area where insects are prevalent and away from competing light sources.
- Solar panel not charging effectively:
- Ensure both the top and external solar panels (if used) are clean and free from dirt or debris.
- Confirm the solar panels are positioned to receive direct sunlight for several hours daily.
- Avoid placing the external solar panel flat on hot surfaces.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | LT808S |
| Power Source | USB Rechargeable, Solar Power (5.5W total: 1.5W top, 4W external) |
| Electric Grid Voltage | 4500V |
| Battery Life (fully charged) | Up to 24 hours |
| Charging Time (USB-C) | 2-3 hours |
| Dimensions | 11.65 x 7.24 x 7.24 inches |
| Item Weight | 2.35 pounds |
| Material | ABS (Protective Net) |
| Waterproof Design | Yes (suitable for outdoor use) |
8. Safety Information
- Keep out of reach of children and pets.
- Do not touch the high-voltage grid when the device is operating.
- Do not immerse the device in water. While it has a waterproof design, it is not designed for submersion.
- Ensure proper ventilation when charging via USB-C.
- Do not attempt to modify or repair the device yourself. Contact customer support for assistance.
Image 10: The bug zapper placed outdoors with its external solar panel mounted on a wall, demonstrating solar charging.
Image 11: An illustration highlighting the waterproof design of the bug zapper, showing it can withstand rain but not submersion.
9. Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please refer to the official PALONE website or contact their customer service directly. Contact details are typically found on the product packaging or the manufacturer's official online channels.