oneisall PW14

Download PDF
Contents

oneisall PW14 108oz/3.2L Wireless Stainless Steel Cat Water Fountain Instruction Manual

Model: PW14 | Brand: oneisall

Introduction

Thank you for choosing the oneisall PW14 Wireless Stainless Steel Cat Water Fountain. This automatic pet water dispenser is designed to provide fresh, filtered water for your cats and small dogs, promoting better hydration and overall health. Its cordless design offers flexible placement, and the quiet operation ensures a peaceful environment for your pets and household. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

Product Overview

The oneisall PW14 Cat Water Fountain features an innovative design focused on pet health and user convenience. Key features include:

  • Ultra-Quiet SilentFlow™ Pump: Operates at merely 20dB, significantly quieter than standard pumps, minimizing noise disturbance.
  • Cordless & Long-Lasting Battery: 100% cordless design with a 4000mAh battery providing up to 30 days of operation on a single charge, allowing flexible placement without power outlet constraints.
  • Easy to Clean: Detachable wireless pump and 304 stainless steel water basin for quick and safe cleaning. The lower part is made of BPA-free ABS material.
  • 5-Layer Filtration System: Ensures every sip is fresh and pure by filtering impurities, softening water, and enhancing taste using Activated Carbon, Ion Resin, Maifan Stone, Non-Woven Fabric, and High-Density Sponge.
  • Three Operating Modes: Includes Timer, Motion Sensor, and Continuous modes to encourage drinking and conserve battery life. Motion detection activates flow within 0.8m.
  • Smart Indicators: Features red light reminders for low water levels and low battery.

Package Contents

Upon unpacking, please ensure all the following items are present:

  • 1 x 3.2L Cordless Cat Water Fountain (ABS base)
  • 1 x Stainless Steel Water Tray
  • 1 x Wireless Water Pump
  • 1 x 5V/1A Adapter
  • 1 x User Manual
  • 1 x Cleaning Brush
  • 1 x Type-C Cord
  • 1 x Filter (1pcs filter and sponges filter)

Setup Instructions

  1. Unpack Components: Carefully remove all items from the packaging.
  2. Rinse Components: Wash the stainless steel water tray and ABS base thoroughly with water.
  3. Prepare Filter: Soak the filter in clean water for 5 minutes before first use to remove any loose carbon dust.
  4. Install Filter: Place the prepared filter into the designated slot on the underside of the stainless steel tray. Ensure it is securely fitted.
  5. Assemble Pump: Attach the wireless water pump to the stainless steel tray. Ensure the pump is correctly aligned with the water outlet.
  6. Fill Water: Fill the ABS base with clean water up to the MAX line indicated on the side. Do not exceed the MAX line.
  7. Place Tray: Carefully place the stainless steel tray with the installed pump and filter onto the ABS base.
  8. Charge Battery: Connect the Type-C cord to the pump module and the adapter, then plug into a power outlet to fully charge the battery before initial use. The battery indicator light will show charging status.
Disassembled oneisall cat water fountain components
Image: Disassembled components of the oneisall cat water fountain, showing the base, stainless steel tray, and pump module.
oneisall cat water fountain with water level indicator
Image: The oneisall cat water fountain with water filled to the maximum level, visible through the transparent indicator window.

Operating Instructions

The oneisall PW14 fountain offers three distinct operating modes:

  1. Motion Sensor Mode:

    This mode activates the water flow when a pet is detected within 0.8 meters of the fountain. The water will flow for a short period (e.g., 15-30 seconds) and then stop, conserving battery life and encouraging pets to drink when they approach.

    To activate: Press the mode button on the pump module until the motion sensor indicator light is on.

  2. Timer Mode (Intermittent Flow):

    In this mode, the fountain dispenses water for a set duration (e.g., 20 seconds) at regular intervals (e.g., every 12 minutes), ensuring fresh water circulation throughout the day.

    To activate: Press the mode button until the timer indicator light is on.

  3. Continuous Mode:

    The water flows continuously, providing a constant stream of fresh water. This mode is ideal if the fountain is plugged into a power source, as it will consume more battery if running wirelessly.

    To activate: Press the mode button until the continuous flow indicator light is on.

Low Water/Battery Indicators: The fountain features red indicator lights to alert you when the water level is low or the battery needs recharging.

oneisall cat water fountain with motion sensor mode active
Image: The oneisall cat water fountain operating in motion sensor mode, with water flowing and a cat approaching.
Video: An overview of the oneisall 3.2L Cat Water Fountain, demonstrating its features and operation modes. This video is provided by the seller, ONEISALL Direct.

Maintenance

Regular maintenance is crucial for the longevity and hygiene of your pet's water fountain:

  • Clean Fountain: It is recommended to clean the entire cat water fountain once every 1-2 weeks. Disassemble the components (stainless steel tray, ABS base, pump module) and wash them with mild soap and water. Rinse thoroughly to remove all soap residue.
  • Replace Filter: Replace the 5-layer filter once every 2-4 weeks, depending on usage and the number of pets. Ensure no filter material is left behind after replacement.
  • Clean Pump: Use the provided cleaning brush to clean the pump thoroughly during each full fountain cleaning.
oneisall cat water fountain disassembled for cleaning
Image: The oneisall cat water fountain disassembled, showing the ease of removing the pump and tray for cleaning.

Troubleshooting

  • No Water Flow:
    • Check if the pump is properly installed and connected.
    • Ensure the water level is above the minimum mark.
    • Clean the pump and filter for any blockages.
    • Verify the battery is charged or the unit is plugged in.
  • Fountain is Noisy:
    • Ensure the water level is sufficient; low water can cause pump noise.
    • Check for any debris in the pump or filter that might be causing vibration.
    • Ensure the fountain is placed on a flat, stable surface.
  • Water Appears Dirty:
    • Replace the filter as per maintenance guidelines.
    • Clean the entire fountain thoroughly.
  • Motion Sensor Not Responding:
    • Ensure the motion sensor mode is selected.
    • Check for any obstructions blocking the sensor.
    • Clean the sensor area if it appears dirty.

Specifications

Model NamePW14
Capacity3.2 Liters (108 oz)
Material304 Stainless Steel (Tray), Acrylonitrile Butadiene Styrene (ABS) (Base)
Dimensions (L x W x H)8.66"L x 5.04"W x 8.66"H
Item Weight1.43 Pounds
Battery1 Nonstandard Battery (included) - 4000mAh
Power Adapter5V/1A Adapter
Charging PortType-C
Noise Level20dB (Ultra-Quiet SilentFlow™ Pump)
oneisall cat water fountain specifications diagram
Image: Diagram showing the model number, capacity, tray material, dimensions, and overall material of the oneisall cat water fountain.

Warranty & Support

The oneisall PW14 Cat Water Fountain comes with a 2-year warranty. For any questions, concerns, or technical assistance, please contact our customer support team. We offer 24/7 support to ensure your satisfaction.

For support, please refer to the contact information provided in your product packaging or visit the official oneisall website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.