Jocoevol Extendable Dining Table Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Jocoevol Extendable Dining Table. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.

Safety Information

Important Safety Precautions:

• Exercise caution around sharp edges during assembly and use.
• Do not load the table with more than 57 pounds (25.8 kg) to prevent damage or instability.
• When extending or retracting the table, ensure stability and avoid sudden movements.
• Do not place hot items directly on the tabletop. Always use coasters or protective mats.
• Ensure all fasteners are securely tightened after assembly and periodically check for looseness.

Package Contents

Your package should contain the following components:

• Extendable Dining Table (1 unit)
• Assembly Hardware (screws, bolts, etc.)
• Instruction Manual

Note: Chairs are not included with this product and are shown for illustration purposes only.

Setup and Assembly

Assembly of the Jocoevol Extendable Dining Table requires careful attention to the provided instructions. All parts are numbered, and holes are pre-drilled for ease of installation.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify all parts are present against the included parts list.
2. Assemble Frame: Follow the step-by-step diagrams in the included instruction booklet to attach the reinforced metal legs and carbon steel frame. Ensure all connections are firm but do not overtighten until all components are aligned.
3. Attach Tabletop: Secure the thickened MDF tabletop to the assembled frame.
4. Install Extension Mechanism: The table features smooth, silent rails for extension. Ensure these are correctly installed according to the diagrams.
5. Final Tightening: Once all components are in place and aligned, securely tighten all screws and bolts.

Figure 1: The Jocoevol Extendable Dining Table in its extended configuration, set for a meal in a modern dining room.

Figure 2: Detailed view of the table's extension mechanism, highlighting flexible expansion, smooth sliding rails, and fixing clips for stability.

Figure 3: Dimensional diagram illustrating the table's length in its compact (47.6 inches) and extended (62 inches) forms, with a consistent width of 28 inches and height of 30 inches.

Operating Instructions

The Jocoevol Extendable Dining Table is designed for versatile use, accommodating 4 to 6 people. Its extension mechanism allows for easy adjustment of its length.

Extending the Table:

1. Gently pull the two halves of the tabletop apart. The smooth sliding rails will allow them to separate.
2. Retrieve the independent extension boards stored underneath the tabletop.
3. Place the extension boards into the gap created between the two tabletop halves. Ensure they are properly seated and aligned.
4. Push the tabletop halves back together until they meet the extension boards and the fixing clips engage, securing the table in its extended position.

Retracting the Table:

1. Disengage any fixing clips that secure the extension boards.
2. Remove the extension boards and store them conveniently under the tabletop.
3. Gently push the two main tabletop halves together until they meet, forming the compact table.

Figure 4: Visual representation of the table's space-saving design, showing its ability to shrink for smaller spaces and expand for larger gatherings.

Maintenance

Proper care will ensure the longevity and appearance of your dining table.

• Cleaning: Wipe the table surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: Clean spills immediately to prevent staining, especially on the wood grain finish.
• Heat Protection: Although the tabletop is heat-resistant, always use placemats or trivets for hot dishes to prevent potential damage.
• Scratch Prevention: Use coasters for drinks and avoid dragging sharp objects across the surface.
• Fastener Check: Periodically check all screws and bolts and tighten them if they have become loose.

Troubleshooting

If you encounter issues with your Jocoevol Extendable Dining Table, refer to the following common solutions:

• Difficulty with Assembly:

  Ensure you are following the numbered steps in the instruction manual precisely. Double-check that all parts are correctly oriented. If a part seems difficult to fit, re-examine the diagram. Do not force components together.

• Table Wobbles or is Unstable:

  Verify that all screws and bolts are fully tightened. Ensure the table is placed on a level surface. If the floor is uneven, consider using furniture pads or shims under the legs.
• Extension Mechanism is Stiff:

  Check for any obstructions in the sliding rails. Ensure the extension boards are inserted correctly and not misaligned. A small amount of silicone-based lubricant can be applied to the rails if they remain stiff, but avoid oil-based lubricants.

• Missing or Damaged Parts:

  Before assembly, carefully check all package contents against the parts list. If any parts are missing or damaged, contact Jocoevol customer support immediately.

Specifications

Customer Support

For any questions, concerns, or assistance with your Jocoevol Extendable Dining Table, please contact Jocoevol customer service. We are committed to providing quality service and will respond to inquiries within 24 hours.

Refer to your purchase documentation for specific contact details or visit the official Jocoevol store page.

Online Store: Jocoevol Store on Amazon