Brightown GY-S-C31

Download PDF
Contents

Brightown 100FT Solar String Lights Instruction Manual

Model: GY-S-C31 | Brand: Brightown

1. Introduction

This manual provides essential information for the safe and effective use of your Brightown 100FT Solar String Lights. Please read all instructions carefully before installation and operation. These lights are designed for outdoor use, featuring durable, shatterproof LED bulbs and dual charging capabilities.

2. Package Contents

  • 1 x Solar String Lights (100FT with 31+2 LED Shatterproof Bulbs)
  • 1 x Detachable Solar Panel
  • 2 x Spare LED Bulbs
  • 1 x Remote Control
  • 1 x USB-Type C Cable
  • Mounting Accessories (Cable Ties, Spring Clip, Ground Stake, Screws)
  • 1 x User Manual

3. Important Safety Instructions

  • Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar heat sources.
  • Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Install only using the mounting kits provided.
  • Do not let the product rest on the power supply cord or on any electric cord.
  • Do not use this product for other than its intended use.
  • Do not hang other decoration or objects on cord, wire, or light string.
  • Do not close doors or windows if clamping or damaging the products or cord.
  • Do not cover the product with cloth, paper, or any material not part of the product when in use.
  • Read and follow all instructions on this product.
  • WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

4. Setup and Installation

The Brightown Solar String Lights offer flexible installation options to suit your outdoor space. Ensure the solar panel is placed where it receives 7-8 hours of direct sunlight daily for optimal charging.

4.1. Connecting the Lights

Connect the string lights to the solar panel. The connection is designed for easy plug-and-play setup without requiring special tools or outlets.

4.2. Mounting Options

Choose the most suitable method for your installation:

  • Installation on Wall:
    1. On brick or concrete walls, mark the installation position, use an electric drill to create three holes. Hammer the plastic plugs into the holes. Use a screwdriver to drive screws firmly.
    2. On wooden walls, use screws directly without plastic plugs.
  • Plug in the Ground: Insert the provided stake firmly into the ground.
  • Clip on Deck: Use the provided spring clip to attach the solar panel to a deck railing or similar surface.

Adjust the joint bolt to fix the solar panel direction, allowing for a 180° adjustment to maximize sun exposure.

Solar panel with charging tip and battery life indicators for different light modes.

Image: Solar panel with battery life indicators and a tip to ensure the panel is turned on before use.

Diagram showing the construction of the light string with PVC cable jacket, wire insulation, high grade copper, and bulb dimensions.

Image: Detailed view of the light string construction and bulb dimensions (3.2 inches long, 1.5 inches wide).

Video: Unboxing and initial setup of the Brightown 100FT Solar String Lights, demonstrating the components and basic installation steps.

5. Operation

The string lights are equipped with a dusk-to-dawn sensor, automatically turning on at night and off at dawn. For manual control and advanced settings, use the included remote.

5.1. Initial Activation

Press the button on the back of the solar panel to switch it on. The indicator light will turn blue when active.

5.2. Remote Control Functions

The remote control allows for customization of your lighting experience:

  • ON/OFF: Turns the lights on or off.
  • Brightness Levels: Adjusts brightness to 25%, 50%, 75%, or 100%.
  • Lighting Modes: Choose from 3 modes: Steady On, Breath, or Flash.
  • Speed Adjustment: Increase or decrease the speed of the Breath and Flash modes.
  • Timer Settings: Set the lights to operate for 6 hours or 8 hours. The lights will flash once when the timer is set.
Remote control displaying buttons for timer, brightness levels, on/off, speed adjustment, and lighting modes.

Image: Remote control with various settings for brightness, modes, and timers.

6. Charging

Your Brightown Solar String Lights feature dual charging options to ensure continuous illumination.

6.1. Solar Charging

The 180° adjustable solar panel maximizes sun exposure. Under 7-8 hours of direct sunlight, the internal battery will fully charge, providing 10+ hours of lighting.

6.2. Type-C USB Charging

For cloudy days or when solar charging is insufficient, use the Type-C USB port for fast charging. A full charge takes approximately 4 hours. The indicator on the panel will turn red during charging or in low power, and green when the battery is fully charged.

Three images showing different charging methods: USB-C charging, solar panel in ground, and solar panel mounted on a wall.

Image: Visual representation of the dual charging options: 4 hours via USB-C or 7-8 hours via solar power.

7. Maintenance and Durability

These string lights are built to withstand various outdoor conditions, requiring minimal maintenance.

  • Shatterproof Bulbs: The PET plastic bulbs are designed to resist drops, wind, rain, and snow, ensuring long-lasting performance.
  • IP65 Waterproof Rating: The lights are rigorously tested to be waterproof, making them suitable for year-round outdoor use without needing to be taken down during bad weather.
  • Weather Resistance: Engineered to resist rain, snow, and winds up to 50 MPH.
Outdoor string lights illuminated during a rain shower, highlighting their IP65 waterproof feature.

Image: The lights are shown operating effectively during rainfall, demonstrating their IP65 waterproof design.

8. Bulb Replacement

If a bulb needs replacement, follow these steps:

  1. Screw out the old bulb from the holder counter-clockwise.
  2. Screw in a new bulb clockwise until secure.
  3. Ensure the replacement bulb is an LED ST38 24V bulb with an E12 base.

9. Troubleshooting

Refer to the following common issues and solutions:

ProblemSolution
String lights do not work.Make sure the solar panel is switched on. Ensure the solar panel is not covered by other objects. Recharge the solar panel or place it in direct sunlight.
Light flashes.The battery may be exhausted. Replace with a new battery.
Remote does not work.Replace the remote battery (2 x AAA 1.5V batteries, not included).
Other issues.If the above cases do not work, consult a professional electrician or contact customer support.

10. Specifications

FeatureDetail
Model NumberGY-S-C31
Length100 Feet
Number of Bulbs31 + 2 Spare LED Bulbs
Bulb TypeLED ST38, Shatterproof PET Plastic
Bulb BaseE12
Light ColorWarm White (2700 Kelvin)
Power SourceSolar Powered & Type-C USB
Solar Charging Time7-8 hours (direct sunlight)
USB Charging Time4 hours
Working Time10+ hours (fully charged)
Waterproof RatingIP65
Special FeaturesAdjustable, Remote Controlled, Shatterproof, Timer, Waterproof, Dusk-to-Dawn Sensor
Batteries2 x 12V batteries required (included)
Item Weight2.2 pounds (1 Kilogram)

11. Warranty and Customer Support

The Brightown team is committed to providing excellent customer service. We offer 24-hour professional customer support to assist with any inquiries or issues regarding your solar string lights.

Please feel free to contact us if you need support. Contact details are typically found on the product packaging or our official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.