YESHOMY L-Shaped Vanity Desk with Lights and Mirror (Model: YH-VD25-0558-BK) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your YESHOMY L-Shaped Vanity Desk with Lights and Mirror, Model YH-VD25-0558-BK. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Always unplug the vanity before assembly or disassembly.
• Be cautious of sharp edges and pinch points during assembly.
• Inspect the product upon receipt to ensure it matches the description and photos.
• Do not use the vanity if any parts are damaged or missing.
• Keep the vanity away from heat sources and moisture.
• Do not use the vanity for purposes other than its intended use.
• This furniture requires 2 people to assemble.
• Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
• Maximum load for the main desk surface: 220 lb (100 kg).
• Maximum load for the upper shelves: 20 lb (9.1 kg).
• Use the provided anti-tip kit to secure the vanity to the wall to prevent tipping.

Package Contents

Your package should contain the following items:

• Vanity Desk Components
• Stool
• Tool Kit (including screwdriver, screws, cam bolts, cam locks, wooden dowels, drawer slides, anti-tip kit)
• Installation and Usage Manual

Product Specifications

Note: Dimensions are approximate and may vary slightly.

Assembly Instructions

Please ensure all parts are present and undamaged before beginning assembly. It is recommended to assemble this vanity with two people. Lay out all components on a soft, clean surface like a carpet or the packaging carton to prevent scratches.

General Fastening System (Cam Lock)

Many parts of this vanity use a cam lock fastening system. Follow these general steps:

1. Insert the cam bolt into the pre-drilled hole on the first board.
2. Align the second board with the first, ensuring the cam bolt enters the corresponding hole.
3. Insert the cam lock into the designated hole on the second board. The opening of the cam lock must point toward the edge of the board where the cam bolt head is located.
4. Using a screwdriver, turn the cam lock clockwise until it is securely fastened, locking the two boards together.

Step-by-Step Assembly Guide

Refer to the included parts drawing for identification of each component (numbered boards and lettered hardware).

1. Assemble the Mirror Unit: Attach the back panel (Part 7) to the mirror frame (Part 1) using cam bolts (A) and wooden dowels (C). Secure the mirror unit to the side support (Part 5) using screws (D).
2. Construct the Upper Shelves: Assemble the two upper shelf panels (Part 6) using wooden dowels (C) and cam locks (B). Attach these to the mirror unit.
3. Assemble the Side Storage Unit: Connect the side panels (Parts 12, 13) to the bottom panel (Part 14) and top panel (Part 19) using cam bolts (A) and wooden dowels (C). Install the drawer slides (CL, CR) onto the side panels using screws (H). Insert the adjustable shelves (Part 20) into the designated slots.
4. Assemble the Desk Surface: Attach the desk surface panels (Parts 2, 3, 4) to the main structure using cam bolts (A) and wooden dowels (C). Ensure the power outlet cutout is correctly positioned.
5. Connect Main Components: Join the mirror unit, upper shelves, side storage unit, and desk surface panels together using cam bolts (A), cam locks (B), and screws (D) as indicated in the diagrams.
6. Install Power Outlet and Hair Dryer Holder: Secure the power outlet (Part P) to the side of the desk using screws (H). Attach the hair dryer holder (Part Q) to the desk.
7. Assemble Drawers: For each drawer, connect the front (Part 29/34), back (Part 28), and side panels (Parts 30, 31, 32, 35, 36, 37) using screws (J). Slide the bottom panel (Part 33) into the grooves. Attach the drawer slides (DL, DR) to the assembled drawers using screws (H).
8. Insert Drawers: Carefully align the drawer slides on the drawers with the slides on the vanity and push the drawers in until they click into place. Refer to the drawer slide installation diagram for proper technique.
9. Assemble Stool: Connect the stool top (Part 24) to the stool legs (Parts 25, 26, 27) using cam bolts (A) and wooden dowels (C). Secure with cam locks (B).
10. Install Anti-Tip Kit: Attach the anti-tip brackets (Q1, Q2, Q3, R2) to the back of the vanity and to a wall stud using the provided screws (S) and anchors (N). This is crucial for stability and safety.

Image: Detailed product dimensions of the YESHOMY L-Shaped Vanity Desk, showing overall measurements and individual component sizes for planning and assembly.

Image: Overview of the YESHOMY L-Shaped Vanity Desk, highlighting its storage features including five drawers, open shelves, and desktop compartments, along with the illuminated mirror.

Operating Instructions

Mirror with Adjustable Lighting

The integrated mirror features adjustable LED lighting with three color modes and adjustable brightness.

• Power On/Off: Touch the circular sensor on the mirror to turn the lights on or off.
• Change Color Mode: Short-press the circular sensor to cycle through the three lighting modes: Cool Light, Natural Light, and Warm Light.
• Adjust Brightness: Long-press the circular sensor to adjust the brightness level within the selected color mode. Release when desired brightness is achieved.

Image: Close-up of the vanity mirror demonstrating the touch-screen control for adjusting the three lighting modes (Cool, Natural, Warm) and brightness levels.

Integrated Charging Station

The vanity desk includes a built-in power outlet with AC, USB, and Type-C ports for convenient charging of your electronic devices.

• AC Outlets: Use the two 125V/12A AC outlets for standard electrical appliances.
• USB Port: The USB port provides up to 18W fast charging for compatible devices.
• Type-C Port: The Type-C port provides up to 20W fast charging for compatible devices.
• Note: Using both USB and Type-C ports simultaneously will limit the total output power to 15W.

Image: Detail of the integrated power strip on the vanity desk, showing two AC outlets, one USB port, and one Type-C port, along with the dedicated hair dryer holder.

Image: Illustration of the fast charging capabilities of the USB and Type-C ports on the YESHOMY vanity desk, indicating maximum wattage for each port.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood.
• Mirror Care: Use a glass cleaner specifically designed for mirrors. Do not spray cleaner directly onto the mirror; apply to a cloth first.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary.
• Placement: Avoid placing the vanity in direct sunlight or near heat sources to prevent warping or discoloration.

Troubleshooting

• Lights Not Working:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the power switch on the mirror is pressed.
  • Verify that the power outlet on the vanity is receiving power.
• Drawers Not Sliding Smoothly:
  • Check if the drawer slides are correctly installed and aligned.
  • Ensure no objects are obstructing the drawer's path.
  • Lubricate the drawer slides with a silicone-based lubricant if necessary.
• Vanity Feels Unstable:
  • Confirm all assembly screws and cam locks are fully tightened.
  • Ensure the vanity is placed on a flat, level surface.
  • Verify the anti-tip kit is properly installed and secured to the wall.
• Charging Ports Not Working:
  • Ensure the vanity's power cord is plugged in.
  • Check if the device being charged is compatible with the USB/Type-C specifications.
  • Try a different cable or device to isolate the issue.

Warranty & Customer Support

For warranty information, please refer to the documentation included with your purchase or contact the seller directly. For any questions, missing parts, or assistance with assembly, please contact YESHOMY customer support through the retailer where the product was purchased.

Contact Information: Please refer to your purchase receipt or the retailer's website for the most up-to-date customer support contact details.