UGREEN PB728

Download PDF
Contents

UGREEN Nexode Pro 200W 25000mAh Power Bank

Model: PB728 - User Manual

1. Introduction

Thank you for choosing the UGREEN Nexode Pro 200W 25000mAh Power Bank. This portable power bank is designed to provide high-capacity, fast charging for a wide range of devices, including laptops, tablets, and smartphones. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

2. Product Overview

Key Features:

  • 25000mAh High Capacity: Capable of recharging a MacBook Air 13" approximately 1.3 times, an iPhone 17 Pro 4.7 times, a Galaxy S25 Ultra 3.4 times, or an iPad Pro 11" 1.8 times.
  • 200W Total Output: Delivers a total output of 200W, allowing simultaneous charging of up to two laptops.
  • 100W Fast Charging per USB-C: USB-C1 and USB-C2 ports/cables each support PD3.0 100W, charging a MacBook Pro 16'' to 54% in 30 minutes.
  • 4-in-1 Simultaneous Charging: Features 2 built-in USB-C cables (USB-C1, USB-C2) and 2 additional USB ports (USB-C3, USB-A) for charging up to 4 devices concurrently.
  • Intelligent TFT Display: Provides real-time information on battery level, current, voltage, and power output for each interface, along with battery health and cycle count.
  • Low-Current Mode: Activate with a 3-second long press of the button for charging delicate accessories like AirPods and smartwatches.
  • Rapid Recharge: The power bank can be fully recharged in 2.2 hours when using a 100W+ charger (not included).
  • Multi-Protection System: Built with flame-retardant material and ThermalGuard system, offering protection against overvoltage, overcurrent, overcharge, over-discharge, high temperatures, and short circuits.

Package Contents:

  • UGREEN Nexode Pro 200W 25000mAh Power Bank (Model PB728)
  • Integrated USB-C Cables (2)
  • User Manual

Product Diagram:

UGREEN Nexode Pro 200W 25000mAh Power Bank with built-in cablesImage: The UGREEN Nexode Pro 200W 25000mAh Power Bank, showcasing its compact design and integrated USB-C cables.

Diagram showing 4 devices charging simultaneously from the UGREEN Nexode Pro Power BankImage: A diagram illustrating the power bank simultaneously charging a laptop, tablet, phone, and earphones using its two built-in USB-C cables and two additional USB ports.

3. Setup

The UGREEN Nexode Pro Power Bank comes pre-charged to some extent, but it is recommended to fully charge it before first use.

Charging the Power Bank:

  1. Connect a USB-C charger (100W+ recommended, not included) to one of the power bank's USB-C input ports (USB-C1 or USB-C2 built-in cables, or USB-C3 port).
  2. Plug the charger into a wall outlet.
  3. The TFT display will show the charging status and estimated time to full charge. The power bank will be fully charged in approximately 2.2 hours with a 100W+ charger.

UGREEN Nexode Pro Power Bank being recharged from a wall adapterImage: The UGREEN Nexode Pro Power Bank connected to a wall charger for recharging, illustrating its fast recharge capability.

4. Operating Instructions

Charging Your Devices:

  1. Connect your device to one of the power bank's output ports/cables:
    • Use the built-in USB-C1 or USB-C2 cables for devices supporting USB-C.
    • Use the USB-C3 port for devices requiring a separate USB-C cable.
    • Use the USB-A port for devices requiring a separate USB-A cable.
  2. The power bank will automatically begin charging your device. The TFT display will show the real-time output power for each connected device.
  3. To stop charging, simply disconnect your device.

UGREEN Nexode Pro Power Bank charging a MacBook Pro at 100WImage: The UGREEN Nexode Pro Power Bank connected to a MacBook Pro, demonstrating its 100W fast charging capability for laptops.

Low-Current Mode:

This mode is ideal for charging low-power devices such as wireless earbuds, smartwatches, or fitness trackers.

  1. With no devices connected, press and hold the power button for 3 seconds until the low-current mode icon appears on the TFT display.
  2. Connect your low-power device to any available port.
  3. To exit low-current mode, press and hold the power button for 3 seconds again, or disconnect all devices and the mode will automatically deactivate after a short period.

5. TFT Display Information

The intelligent TFT display provides comprehensive information about the power bank's status:

  • Battery Level: Shows the remaining battery percentage.
  • Real-time Power Output/Input: Displays the current wattage being delivered to or received from devices for each port (C1 IN/OUT, C2 IN/OUT, C3 IN/OUT, A OUT).
  • Voltage and Current: Detailed voltage and current readings for active ports.
  • Battery Health: Indicates the overall health of the internal battery.
  • Cycle Count: Tracks the number of charge/discharge cycles.
  • Time Remaining: Estimated time to full charge (when charging the power bank) or estimated remaining usage time (when discharging).
  • Low-Current Mode Indicator: Icon appears when low-current mode is active.

Close-up of UGREEN Nexode Pro Power Bank's TFT intelligent display showing various metricsImage: A detailed view of the power bank's TFT display, highlighting indicators for real-time power, battery percentage, remaining charge time, and battery health.

6. Maintenance

  • Keep the power bank away from water, fire, and extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Clean the power bank with a dry, soft cloth. Do not use corrosive cleaners.
  • Store the power bank in a cool, dry place when not in use. For long-term storage, it is recommended to keep the battery level between 50% and 70%.
  • Do not attempt to disassemble, repair, or modify the power bank yourself.

7. Troubleshooting

ProblemPossible CauseSolution
Power bank not charging devices.Low battery on power bank; incorrect cable; device not compatible; low-current mode not activated for small devices.Recharge the power bank; ensure cable is functional and correctly connected; check device compatibility; activate low-current mode for small devices.
Power bank not recharging.Charger not powerful enough; faulty charger/cable; loose connection.Use a 100W+ PD charger; try a different charger and cable; ensure all connections are secure.
TFT display is off or unresponsive.Power bank is off; battery is completely depleted; temporary software glitch.Press the power button to turn on; recharge the power bank; try restarting by connecting/disconnecting a charger.
Slow charging speed.Device does not support fast charging; multiple devices connected; cable limitation.Ensure your device and cable support fast charging protocols; disconnect other devices to maximize output to one device.

8. Specifications

FeatureDetail
Model NumberPB728
Battery Capacity25000mAh
Total Power Output200W (Max)
USB-C1/C2 OutputPD3.0 100W (Max per port)
USB-C3 OutputPD3.0 100W (Max)
USB-A Output22.5W (Max)
Input (USB-C1/C2/C3)100W (Max)
Battery TypeLithium-ion
Dimensions (L x W x H)15.8 x 5.4 x 5 cm
Weight631 g
Special FeaturesDigital Display, Fast Charging, Integrated Cables, Multi-Protection

9. Safety Information

  • Do not expose the power bank to direct sunlight, heat sources, or high humidity.
  • Avoid using the power bank in environments with extreme temperatures (below 0°C or above 45°C).
  • Keep out of reach of children.
  • Do not short-circuit the power bank.
  • Dispose of the power bank according to local regulations. Do not dispose of it with household waste.
  • If the power bank swells, leaks, or emits an unusual odor, discontinue use immediately.

UGREEN Nexode Pro Power Bank with multi-protection iconsImage: The UGREEN Nexode Pro Power Bank highlighting its multi-protection features, including safeguards against overvoltage, overcurrent, overcharge, over-discharge, high temperatures, and short circuits.

10. Warranty and Support

UGREEN products come with a standard warranty. For detailed warranty information, product support, or technical assistance, please refer to the official UGREEN website or contact UGREEN customer service directly. Please have your model number (PB728) and purchase information ready when contacting support.

© 2026 UGREEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.