Merax Twin Size Linen Upholstered Platform Bed with Trundle and Storage Drawers

Merax Twin Size Linen Upholstered Platform Bed with Trundle and Storage Drawers Instruction Manual

Model: Twin Size Linen Upholstered Platform Bed with Trundle and Storage Drawers

1. Introduction

Thank you for choosing the Merax Twin Size Linen Upholstered Platform Bed. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions could result in injury or damage to the product.

  • Do not exceed the weight capacity of 330 lbs for the main bed and 220 lbs for the trundle bed.
  • Ensure all parts are securely assembled to prevent instability.
  • Always follow the assembly instructions carefully to avoid injury.
  • Keep small parts away from children during assembly.
  • Periodically check all connections and tighten as necessary.

3. Package Contents

Your Merax Twin Size Linen Upholstered Platform Bed is delivered in two packages. Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Included Components:

  • Upholstered Platform Bed Frame (Main Bed)
  • Tall Stripe Headboard
  • Twin Trundle Bed Frame
  • Three Storage Drawers
  • Wood Slats for Main Bed and Trundle
  • Assembly Hardware (screws, bolts, nuts, etc.)
  • Installation Manual

4. Specifications

FeatureSpecification
SizeTwin
Product Dimensions (L x W x H)78.7" x 40.4" x 48.4"
ColorGrey
MaterialEngineered Wood, Linen
Headboard MaterialLinen
Main Bed Weight Capacity330 lbs
Trundle Bed Weight Capacity220 lbs
Compatible Mattress SizeTwin (Main Bed & Trundle)
Assembly RequiredYes
Item Weight73 pounds
UPC199193408295

Note: Mattress not included.

5. Setup and Assembly

Assembly of the Merax Platform Bed is required. Please follow the detailed instructions provided in the separate installation manual included with your packages. Ensure you have sufficient space and all tools ready before starting.

General Assembly Steps:

  1. Unpack Components: Carefully remove all parts from the two packages and lay them out on a clean, soft surface to prevent scratches. Verify against the parts list in your installation manual.
  2. Assemble Main Bed Frame: Follow the manual to connect the side rails, footboard, and headboard. Ensure all bolts are finger-tightened initially.
  3. Install Wood Slats: Secure the wooden slats onto the main bed frame. These provide mattress support and eliminate the need for a box spring.
  4. Assemble Trundle Bed: Construct the trundle frame according to the manual, including its own set of slats.
  5. Assemble Storage Drawers: Put together the three storage drawers.
  6. Final Tightening: Once all components are in place, systematically tighten all bolts and screws using the provided tools. Do not overtighten.
  7. Insert Trundle and Drawers: Slide the assembled trundle and storage drawers into their designated positions under the main bed frame.
Merax Twin Upholstered Platform Bed with Trundle and Drawers

Image 1: Fully assembled Merax Twin Upholstered Platform Bed with trundle and storage drawers extended.

Merax Twin Bed Dimensions Diagram

Image 2: Detailed dimensions diagram for the Merax Twin Platform Bed, including headboard height, bed length, and width.

6. Operating Instructions

Using the Trundle Bed:

The trundle bed is designed to slide smoothly from underneath the main bed. To use, gently pull the trundle frame outwards from the front of the bed. It is equipped with wheels for easy movement. To store, push the trundle back into its compartment until it is fully recessed.

Merax Twin Bed with Trundle Pulled Out

Image 3: Side view of the Merax Twin Platform Bed showing the trundle bed fully extended.

Using the Storage Drawers:

The three storage drawers are located beneath the main bed frame. To open, pull the drawer handles outwards. To close, push the drawers back into their compartments until they are flush with the bed frame. These drawers are ideal for storing bedding, clothes, or other items to keep your room organized.

Merax Twin Bed with Storage Drawers Open

Image 4: Side view of the Merax Twin Platform Bed with the three storage drawers partially open.

7. Maintenance

  • Cleaning: For the upholstered linen fabric, use a soft, damp cloth with a mild detergent for spot cleaning. Avoid harsh chemicals or abrasive cleaners. For the wood components, wipe with a dry or slightly damp cloth.
  • Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
  • Slats: Ensure all wooden slats are properly seated and undamaged. Replace any broken slats immediately to prevent mattress damage or injury.
  • Drawer Rails: Keep drawer rails free of dust and debris to ensure smooth operation.

8. Troubleshooting

  • Bed feels wobbly: Check all assembly hardware. Ensure every bolt and screw is securely tightened. Uneven flooring can also contribute; consider using furniture pads to level the bed.
  • Trundle or drawers are difficult to slide: Check for obstructions in the tracks or under the bed. Ensure the wheels/glides are clean and free of debris. Verify that the trundle and drawers were assembled correctly and are not misaligned.
  • Squeaking noises: Squeaking often indicates loose connections. Re-tighten all hardware. If the noise persists, apply a small amount of lubricant (e.g., silicone spray) to metal-on-metal contact points, or place felt pads between wood components.
  • Mattress does not fit the trundle: The trundle bed is designed for a standard twin-size mattress. Ensure the mattress thickness is appropriate for the trundle's clearance. Typically, a mattress for the trundle should not exceed 6 inches in height to allow it to slide under the main bed.

9. Warranty Information

Merax products typically come with a limited manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Merax website for specific warranty terms and conditions, including duration and coverage details. Keep your proof of purchase for warranty claims.

10. Customer Support

If you have any questions regarding the assembly, operation, or maintenance of your Merax Twin Size Linen Upholstered Platform Bed, or if you require replacement parts, please contact Merax customer support. You can typically find contact information on the Merax website or on the packaging materials.

When contacting support, please have the following information ready:

  • Product Model: Twin Size Linen Upholstered Platform Bed with Trundle and Storage Drawers
  • ASIN: B0FJQZRF8L
  • Date of Purchase
  • A detailed description of the issue

Related Documents - Twin Size Linen Upholstered Platform Bed with Trundle and Storage Drawers

Preview Merax WF310629-WF310630 Platform Bed Assembly Instructions
Detailed assembly instructions for the Merax WF310629-WF310630 platform bed frame, including headboard bookcase, trundle, and drawers. Includes part lists, hardware lists, and step-by-step guidance.
Preview Merax WF305618 Queen Size Upholstered Bed Assembly Instructions
Comprehensive assembly guide for the Merax WF305618 Queen Size Upholstered Floating Velvet Platform Bed, including parts list, hardware details, and step-by-step instructions with textual descriptions of diagrams.
Preview Merax WF194473 Bed with Trundle Assembly Instructions
Comprehensive assembly guide for the Merax WF194473 Bed with Trundle. This document provides a detailed parts list, hardware list, and step-by-step instructions to help you build your bed frame.
Preview Twin Twin House Bed Assembly Instructions - Model WF311785
Step-by-step assembly instructions for the Twin Twin House Bed, model WF311785. Includes parts list, hardware list, and detailed diagrams with textual descriptions for each assembly stage.
Preview Merax Twin Bed Assembly Instructions
Detailed assembly instructions for the Merax Twin Bed, model WF187441, including part lists, hardware lists, and step-by-step visual guides.
Preview Merax Upholstered Platform Bed Assembly Instructions - Model W1885142180-W1885142183
Comprehensive assembly guide for the Merax Padded Backrest King Size Upholstered Platform Bed (Model W1885142180-W1885142183). Features a detailed parts list, hardware list, and step-by-step instructions with textual descriptions of diagrams.