1. Introduction
Thank you for choosing the EasyCount E 12" x 10" Portable Heat Press Machine. This manual provides essential information for the safe and effective operation of your device. Please read it thoroughly before first use and retain it for future reference.
2. Safety Instructions
- Always operate the heat press on a stable, heat-resistant surface.
- Keep hands and fingers away from the heating plate during operation to prevent burns. The heating plate reaches temperatures up to 400°F (205°C).
- Ensure the machine is unplugged when not in use or during cleaning.
- Do not leave the machine unattended while it is powered on or heating.
- Keep out of reach of children and pets.
- Do not immerse the machine in water or other liquids.
- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid hazards.
- The machine features an anti-overheating construction and a shut-off function for safety.
3. Package Contents
Verify that all items are present in the package:
- EasyCount E Heat Press Machine (1 unit)
- Safety Base (1 unit)
- User Manual (1 unit)
- Canvas Bag (1 unit)
- Transfer Vinyl Sheets (Several)

4. Product Overview
4.1 Machine Dimensions
- Heating Plate Size: 12 inches x 10 inches (30.5 cm x 25.4 cm)
- Overall Product Dimensions: 13"L x 6.5"W x 14"H
- Item Weight: 7.5 pounds

4.2 Control Panel
The control panel allows you to set and monitor the temperature and time for your heat transfer projects.

- ON/OFF Key: Powers the machine on or off.
- Temperature Key: Toggles between temperature setting mode and normal operation.
- Time Setting Key: Toggles between time setting mode and normal operation.
- Decrease Key (-): Decreases the set temperature or time.
- Increase Key (+): Increases the set temperature or time.
- Countdown Key (Play/Pause): Starts or pauses the heat press countdown.
5. Initial Setup
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the heat press machine on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the machine.
- Safety Base: Position the safety base nearby for resting the hot heat press during and after use.
- Power Connection: Plug the power cord into a grounded electrical outlet.
6. Operating Instructions
6.1 Power On and Temperature/Time Setting
- Press the ON/OFF Key to power on the machine. The display will light up.
- Press the Temperature Key. Use the Increase (+) and Decrease (-) keys to set the desired temperature (range: 210-400°F / 100-205°C).
- Press the Time Setting Key. Use the Increase (+) and Decrease (-) keys to set the desired time (range: 0-600 seconds).
- The machine will begin heating to the set temperature. Wait for the machine to reach the target temperature before proceeding.
6.2 Heat Transfer Process
Follow these general steps for heat transfer. Always refer to the specific instructions for your transfer material (HTV, sublimation paper, etc.) for precise temperature and time settings.

- Prepare Surface: Place your garment or item on a flat, firm surface. Pre-press the item for 5-10 seconds to remove moisture and wrinkles if recommended by your transfer material.
- Position Transfer: Carefully place your heat transfer vinyl (HTV) or sublimation design onto the item. Use heat-resistant tape if necessary to secure it.
- Apply Pressure: Once the machine reaches the set temperature, place the heat press firmly over the transfer. Apply even, downward pressure.
- Start Timer: Press the Countdown Key to start the timer.
- Remove Press: When the timer beeps, carefully lift the heat press and place it on the safety base.
- Peel Transfer: Allow the transfer to cool (if it's a cool peel material) or peel immediately (if it's a hot peel material) according to your transfer material's instructions.
6.3 Time & Temperature Guide for HTV
This table provides general guidelines. Always perform a test press on a scrap piece of fabric before applying to your final project.

| HTV Type | Material Type | Temperature | Time | Peel/Press |
|---|---|---|---|---|
| Basic PU | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 330°F/165°C | 30 sec | W/G |
| Nylon Blend or Silk, Mesh | 305°F/150°C | 30 sec | W/G | |
| Foil | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 315°F/155°C | 30 sec | C/G |
| Nylon Blend or Silk, Mesh | 305°F/150°C | 30 sec | C/G | |
| Glitter | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 340°F/170°C | 30 sec | W/G |
| Nylon Blend or Silk, Mesh | Not recommended | Not recommended | Not recommended | |
| Holographic | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 330°F/165°C | 30 sec | W/G |
| Nylon Blend or Silk, Mesh | Not recommended | Not recommended | Not recommended | |
| Stretchable (e.g. Sportflex) | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 315°F/158°C | 30 sec | W/G |
| Nylon Blend or Silk, Mesh | Not recommended | Not recommended | Not recommended | |
| Patterned | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 340°F/170°C | 50 sec | C/F |
| Nylon Blend or Silk, Mesh | Not recommended | Not recommended | Not recommended | |
| Fusible Fabric | 100% Cotton, Cotton/Poly Blend, Polyester, Cotton Canvas, Felt | 315°F/155°C | 30 sec | W/G |
| Nylon Blend or Silk, Mesh | Not recommended | Not recommended | Not recommended |
Key: W/G = Warm Peel / Gentle Press, C/G = Cool Peel / Gentle Press, C/F = Cool Peel / Firm Press
6.4 Applications
The EasyCount E Heat Press Machine is suitable for a wide range of heat transfer projects, including:
- T-shirts
- Jackets
- Sweatshirts
- Polo shirts
- Banners
- Blankets
- Canvas bags
- Hats
- Pillows

7. Maintenance
- Cleaning: Ensure the machine is unplugged and completely cool before cleaning. Wipe the heating plate with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the heat press in a dry, cool place, away from direct sunlight and moisture. Use the provided canvas bag for protection.
- Regular Inspection: Periodically check the power cord for any signs of damage. If damage is found, discontinue use and contact customer support.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on. | Not plugged in; power outlet issue; power button not pressed. | Ensure the power cord is securely plugged into a working outlet. Press the ON/OFF button. |
| Machine not heating up. | Temperature not set; machine malfunction. | Verify temperature settings. If issue persists, contact customer support. |
| Transfer not adhering properly. | Incorrect temperature/time; insufficient pressure; wrong peel method. | Refer to the Time & Temperature Guide and your transfer material instructions. Ensure firm, even pressure. Check if it's a hot or cool peel. |
| Transfer material melting/burning. | Temperature too high; time too long. | Lower temperature or reduce press time. Always use a protective sheet (e.g., Teflon) over your design. |
9. Specifications
- Model Number: HP5-Stricker09
- Brand: EasyCount E
- Heating Plate Size: 12" x 10" (30.5 cm x 25.4 cm)
- Product Dimensions: 13"L x 6.5"W x 14"H
- Item Weight: 7.5 pounds
- Material (Construction): High-performance Polyamide -PA9T
- Temperature Range: 210°F - 400°F (100°C - 205°C)
- Time Range: 0 - 600 seconds
- UPC: 635407335976
10. Warranty and Support
10.1 Manufacturer's Warranty
This EasyCount E Heat Press Machine comes with a 2-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
10.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your EasyCount E Heat Press Machine, please contact our customer support team. Refer to the contact information provided on the product packaging or the official EasyCount E website.