1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ergosolid G70 Gas Spring Articulated Monitor Arm. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
Please observe the following safety precautions during installation and use:
- Ensure all components are present and undamaged before installation. Do not use if any parts are missing or faulty.
- This product contains a high-pressure gas spring. Do not attempt to disassemble the gas spring unit.
- Do not exceed the maximum weight capacity of 12 kg (26.4 lbs) or the specified monitor size range of 22-35 inches.
- Install the monitor arm on a sturdy desk surface capable of supporting the combined weight of the arm and your monitor.
- Tighten all screws securely, but do not overtighten to avoid stripping threads or damaging components.
- Keep children and pets away during installation.
3. Package Contents
Verify that all the following components are included in your package:
- Monitor Arm Assembly
- Desk Clamp Base
- Grommet Mount Base
- VESA Plate
- Hardware Kit (screws, washers, spacers)
- Hex Keys for adjustment
- Instruction Manual
4. Compatibility
The Ergosolid G70 monitor arm is designed for optimal performance with the following specifications:
- Monitor Size: 22 to 35 inches (56 to 89 cm)
- Monitor Weight: 2 to 12 kg (4.4 to 26.4 lbs)
- VESA Compatibility: 75x75 mm and 100x100 mm
5. Installation
The monitor arm offers two installation methods: desk clamp and grommet mount.
5.1. Choose Your Mounting Method
5.1.1. Desk Clamp Installation
- Attach the desk clamp base to the edge of your desk.
- Tighten the clamp screw until the base is securely fastened to the desk.
- Insert the main pole of the monitor arm into the clamp base.
5.1.2. Grommet Mount Installation
- If your desk has a grommet hole, insert the grommet mount base through the hole.
- Secure the base from underneath the desk using the provided plate and nut.
- Insert the main pole of the monitor arm into the grommet base.
5.2. Attaching the Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the VESA plate is oriented correctly (usually with an "UP" indicator).
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
- Secure the monitor to the arm by tightening the locking screw on the VESA head.
5.3. Cable Management
The monitor arm features an integrated cable management system. Route your monitor's power and video cables through the designated channels along the arm to maintain a tidy workspace.
6. Adjustments and Operation
The Ergosolid G70 monitor arm offers a range of adjustments for optimal ergonomic positioning.
6.1. Gas Spring Tension Adjustment
The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement. Use the provided hex key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.
6.2. Height Adjustment
Once the gas spring tension is correctly set, you can effortlessly raise or lower your monitor by gently pushing or pulling the monitor to the desired height. The arm allows for a height adjustment range of up to 530 mm.
6.3. Tilt Adjustment
The monitor can be tilted from +85° (upwards) to -30° (downwards) to reduce glare and optimize viewing angles. Simply grasp the monitor and tilt it to your preferred angle.
6.4. Swivel Adjustment
The arm allows for a 90° lateral rotation (swivel) to the left and right, enabling you to share your screen or adjust your viewing position easily.
6.5. Rotation (Pivot)
The monitor can be rotated 360° from landscape to portrait orientation without removing it from the arm.
6.6. Retraction/Extension
The articulated arm allows for extension and retraction, providing a maximum reach of 650 mm to position your monitor at the ideal distance from your eyes.
7. Maintenance
To ensure the longevity and optimal performance of your Ergosolid G70 monitor arm, follow these maintenance guidelines:
- Cleaning: Wipe the arm surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
- Gas Spring: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.
8. Troubleshooting
If you encounter any issues with your monitor arm, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor drifts down or up | Gas spring tension is incorrect for monitor weight. | Adjust the gas spring tension using the hex key. Increase tension for heavier monitors (clockwise), decrease for lighter monitors (counter-clockwise). |
| Monitor is wobbly or unstable | Mounting screws are loose or desk is unstable. | Ensure all mounting screws (clamp/grommet and VESA plate) are securely tightened. Verify desk stability. |
| Difficulty moving the arm | Gas spring tension is too high or joints are too tight. | Decrease gas spring tension. Check and slightly loosen any joint screws if movement is excessively stiff. |
| Monitor cannot be rotated (pivot) | Rotation mechanism is too tight. | Check for any locking screws on the rotation mechanism and loosen slightly if present. |
9. Specifications
| Feature | Specification |
|---|---|
| Model | G70 |
| Brand | Ergosolid |
| Material | Aluminum |
| Color | Graphite |
| Compatible Monitor Size | 22 - 35 inches (56 - 89 cm) |
| Weight Capacity | 2 - 12 kg (4.4 - 26.4 lbs) |
| VESA Compatibility | 75x75 mm, 100x100 mm |
| Mounting Type | Desk Clamp, Grommet Mount |
| Height Adjustment | Up to 530 mm |
| Tilt Angle | +85° / -30° |
| Swivel Angle | 90° (left/right) |
| Rotation (Pivot) | 360° |
| Max Extension | 650 mm |
| Product Dimensions | 44 x 23 x 13 cm (packaged) |
| Product Weight | 4.91 kg |
10. Warranty and Support
For warranty information and customer support, please refer to the official Ergosolid website or contact your retailer. The return policy for this product, if purchased through Amazon, is typically 6 days for refund/replacement, fulfilled by Amazon. Specific warranty terms are provided by the manufacturer.
You can visit the Ergosolid brand store for additional information and support: Ergosolid Brand Store
