Middle Rabbit Pet Tracking Smart Tag User Manual

Introduction

The Middle Rabbit Pet Tracking Smart Tag is designed to help you keep track of your beloved pets. This smart tag is fully compatible with Android phones and utilizes Bluetooth connectivity to provide location information through the Google Find My Device network. Its water-resistant design ensures durability for outdoor use.

Image: The Middle Rabbit Pet Tracking Smart Tag, a compact black circular device, shown alongside a smartphone, illustrating its small size and integration with mobile technology.

Setup Guide

Follow these steps to set up your Middle Rabbit Pet Tracking Smart Tag with your Android device:

1. Prepare Your Phone: Ensure your phone's network (Wi-Fi or mobile data) and Bluetooth are turned on.
2. Power On the Smart Tag: Press and hold the button on the smart tag until it plays a long beep. This indicates the device is powered on.
3. Open the Find My Device App: Launch the Google Find My Device app on your Android phone.
4. Connect the Tag: When the "Wireless Tag" pop-up appears on your phone screen, tap "Connect." Then, tap "Agree and continue" to complete the pairing process.

Visual Setup Instructions

Video: An official setup guide from Middle Rabbit demonstrating how to connect the Pet Tracking Smart Tag to an Android phone using the Google Find My Device app. It shows the steps from enabling Bluetooth to successful pairing.

Operating Instructions

Once your Middle Rabbit Pet Tracking Smart Tag is successfully paired, you can use the Google Find My Device app to locate your pet.

• Locate Your Pet: Open the Google Find My Device app. The app will display the last known location of your smart tag on a map.
• Play Sound: If your pet is nearby but out of sight, you can use the "Play sound" feature in the app. The smart tag will emit an audible sound to help you pinpoint its exact location.
• Find Nearby: For closer proximity tracking, the "Find nearby" feature can guide you to the tag's location as you approach it.

Maintenance

Battery Replacement

The Middle Rabbit Pet Tracking Smart Tag uses one CR2032 battery. When the battery level is low, the Find My Device app will notify you. To replace the battery:

1. Carefully open the smart tag casing.
2. Remove the old CR2032 battery.
3. Insert a new CR2032 battery, ensuring correct polarity.
4. Close the casing securely.

Water Resistance

The smart tag is designed to be water-resistant, making it suitable for various outdoor conditions. However, it is not fully waterproof. Avoid prolonged submersion in water to prevent damage.

Troubleshooting

If you encounter issues connecting your smart tag, try the following steps:

1. Check Phone Settings: Ensure your phone's network (Wi-Fi or mobile data) and Bluetooth are turned on.
2. Restart the Tracker:
   • Press and hold the button for 3 seconds, then release. If you hear 2 beeps, it's powered off.
   • Press and hold the button again until you hear a long beep to power it back on.
3. Restart Your Phone: A simple phone restart can often resolve connectivity issues.
4. Factory Reset the Tracker: If the above steps do not work, you may need to perform a factory reset:
   • Double-click the button (you should hear 1 beep).
   • Tap the button 4 more times.
   • On the 5th press, press and hold until you hear a long beep series. This indicates a successful factory reset.

If you continue to experience issues, please contact customer support.

Specifications

Warranty and Support

The Middle Rabbit Pet Tracking Smart Tag comes with a 1-year free return and replacement policy.

For further assistance or inquiries, please email us at vip@middlerabbit.com.