1. Introduction
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your VEVOR 8KW All-in-One Portable Diesel Air Heater. Please read this manual thoroughly before using the product and retain it for future reference.
The VEVOR 8KW Diesel Air Heater is designed to provide fast and efficient heating for various applications, including RVs, trucks, SUVs, vans, tents, and garages. It features an 8KW heating capacity, operates on DC 12V/24V, and includes a remote control and LCD display for convenient temperature management.

Image: The VEVOR 8KW All-in-One Portable Diesel Air Heater, showcasing its compact design and integrated fuel tank.
2. Safety Instructions
WARNING: Failure to follow these safety instructions may result in fire, electric shock, serious injury, or death.
- Proper Ventilation: Ensure adequate ventilation when operating the heater. The exhaust gases must be discharged externally to prevent carbon monoxide poisoning. Never operate the heater in an enclosed, unventilated space.
- Fuel Handling: Use only diesel fuel. Do not use gasoline or other volatile fuels. Ensure the fuel cap is securely sealed to prevent leaks, especially during transport or on uneven surfaces.
- Overheat Protection: The heater is equipped with an overheat shutoff mechanism (≥536℉ / 280℃). Do not obstruct air intake or exhaust vents.
- Electrical Safety: Connect the heater to a compatible DC 12V or 24V power source. Ensure correct polarity. The unit includes reverse polarity and overvoltage protection.
- Exhaust System: Always use the provided exhaust pipe heat sleeve to reduce the risk of heat damage to surrounding surfaces. Ensure the exhaust pipe is routed away from flammable materials and vehicle components.
- Placement: Place the heater on a stable, non-flammable surface. Maintain a safe distance from combustible materials.
- Children and Pets: Keep children and pets away from the heater during operation.
- Altitude: The heater performs well below 9,842 ft (3000 m) elevation. Operation at higher altitudes may affect performance.
- Emergency Shut-off: Familiarize yourself with the emergency shut-off procedure.
3. Product Overview and Components
The VEVOR 8KW All-in-One Portable Diesel Air Heater is a self-contained unit designed for ease of use and portability. Key features include:
- Integrated Design: All components, including the fuel tank, are housed within a single unit.
- High Heating Capacity: 8KW power output, suitable for spaces of 108–161 ft².
- Dual Voltage Compatibility: Operates on DC 12V or 24V.
- Fuel Efficiency: Low fuel consumption (0.04–0.1 gal/h) with a 1.3 gal (5L) fuel tank for extended operation.
- Control Options: LCD display panel and remote control for convenient operation.
- Safety Features: Overheat shutoff, reverse polarity protection, overvoltage protection, and exhaust pipe heat sleeve.
Package Contents
Verify that all components listed below are included in your package:

Image: Detailed diagram showing the VEVOR Diesel Heater unit and all included accessories.
- 1 x Diesel Air Heater Unit
- 1 x Intake Pipe
- 1 x Exhaust Pipe
- 1 x Air Outlet Duct
- 1 x Remote Control
- 1 x Silencer with Accessories
- 1 x Air Filter Element
- 2 x Air Outlet Duct Clamps
- 4 x Intake & Exhaust Pipe Clamps
- 2 x Insulation Sleeve Clamps
- 2 x Exhaust Pipe Hangers
- 4 x Mounting Screws for Base
- 1 x Rotary Air Outlet
- 1 x User Manual
- 1 x Heat-Insulating Protective Sleeve
- 4 x Pipe Hanger Mounting Screws
- 4 x Nuts
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your diesel heater. Follow these steps carefully:
- Choose a Location: Select a stable, flat, and non-flammable surface for the heater. Ensure there is sufficient clearance around the unit for proper airflow and to prevent heat damage to surrounding materials.
- Mounting: Secure the heater using the provided mounting screws for the base. This prevents accidental tipping.
- Fueling: Fill the integrated 1.3-gallon (5L) fuel tank with clean diesel fuel. Ensure the spill-proof cap is tightly secured after fueling to prevent leaks. The fuel tank has a scale to monitor fuel levels.
- Intake Pipe Installation: Connect the intake pipe to the designated port on the heater. Ensure it is securely fastened with clamps.
- Exhaust System Installation:
- Attach the exhaust pipe to the heater's exhaust port.
- Install the silencer onto the exhaust pipe.
- Crucially, route the exhaust pipe externally, ensuring all exhaust gases are discharged outside the heated space.
- Apply the heat-insulating protective sleeve over the exhaust pipe, especially where it might come into contact with surfaces or pass through openings, to prevent burns and heat damage. Secure with clamps.
- Use the exhaust pipe hangers to support the exhaust system and maintain proper clearance.
- Air Outlet Duct: Connect the air outlet duct to the hot air output port and direct it towards the area to be heated.
- Electrical Connection: Connect the heater to a DC 12V or 24V power source. Observe correct polarity (positive to positive, negative to negative).

Image: Diagram illustrating the correct setup of the intake, exhaust, and hot air output pipes for secure and safe operation.

Image: Close-up of the spill-proof fuel cap, designed to prevent leaks on bumpy roads.

Image: Close-up of the exhaust pipe with its insulation sleeve, highlighting its role in preventing burns and floor damage.
5. Operating Instructions
Your VEVOR Diesel Air Heater can be controlled via the integrated LCD display panel or the remote control.
5.1. LCD Display Panel Operation

Image: The LCD display panel and remote control for the VEVOR Diesel Heater, showing temperature adjustment range.
- Power On/Off: Press the power button (⚡) to turn the heater on or off.
- Temperature Adjustment: Use the up (▲) and down (▼) arrows to set the desired temperature. The adjustable temperature range is typically 46.4℉ (8℃) to 96.8℉ (36℃).
- Mode Selection: The display may offer various modes (e.g., constant heat, thermostat control). Refer to the specific icons on your LCD panel for detailed mode functions.
- Preheating: Some models allow preheating before driving to reduce cold starts and energy load. Consult the specific icons or manual for this feature.
5.2. Remote Control Operation
The remote control allows you to operate the heater from up to 98 ft (30 m) away.
- Power On/Off: Use the power button on the remote.
- Temperature/Power Adjustment: Use the designated buttons (usually +/- or up/down arrows) to adjust the heating level or target temperature.
- Other Functions: The remote may include buttons for mode selection, fan speed, or timer functions.
Note: Ensure the remote control has working batteries and a clear line of sight to the heater's receiver for optimal performance.
5.3. Fuel Efficiency and Heating Performance

Image: Illustration of the heater's fuel efficiency, indicating 1.3 gallons (5 liters) can provide 8 hours of use without refueling.
- The heater consumes approximately 0.04–0.1 gallons (0.17–0.48 liters) of fuel per hour.
- The 1.3-gallon (5L) fuel tank can support up to 8 hours of continuous heating on a single fill, depending on the heat setting and ambient temperature.
- The heater can reach an outlet temperature of 210℉ (99℃) in 5 minutes and warm a space of 108–161 ft² in about 10 minutes.

Image: An RV in a snowy environment, illustrating the heater's ability to provide instant warmth, reaching 104°F (40°C) outlet temperature in 2 minutes.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your VEVOR Diesel Air Heater.
- Fuel Quality: Always use clean, high-quality diesel fuel. Poor fuel quality can lead to blockages and reduced performance.
- Air Filter: Periodically inspect and clean or replace the air filter element to ensure proper airflow and combustion.
- Exhaust System: Check the exhaust pipe and silencer for any blockages, damage, or leaks. Ensure the heat sleeve is intact.
- General Cleaning: Keep the exterior of the heater clean and free from dust and debris. Do not use abrasive cleaners.
- Storage: When storing the heater for extended periods, ensure the fuel tank is empty or filled with fresh fuel and the unit is clean and dry.
7. Troubleshooting
If you encounter issues with your VEVOR Diesel Air Heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not start or stops unexpectedly. |
|
|
| Reduced heating performance. |
|
|
| Excessive smoke or unusual odor. |
|
|
| Remote control not working. |
|
|
| Fuel line pinched or restricted. |
|
|
For issues not listed here, or if troubleshooting steps do not resolve the problem, contact VEVOR customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | Diesel Heater8 |
| Manufacturer | VEVOR |
| Heating Power | 8 KW |
| Rated Voltage | DC 12V/24V |
| Fuel Tank Capacity | 1.3 Gallons (5 Liters) |
| Fuel Consumption | 0.04–0.1 gal/h (0.17–0.48 L/h) |
| Heating Area | 108–161 ft² |
| Product Dimensions | 15.75 x 9.65 x 12.01 inches (400 x 245 x 305 mm) |
| Item Weight | 17.64 pounds (8 kg) |
| Operating Temperature Range | 46.4℉ (8℃) to 96.8℉ (36℃) |
| Applicable Altitude | Below 9,842 ft (3000 m) |
| Safety Features | Overheat shutoff (≥536℉), Reverse polarity protection, Overvoltage protection |

Image: Visual representation of the VEVOR Diesel Heater's wide compatibility with DC 12V/24V vehicle power supplies, including RVs, SUVs, trucks, sedans, buses, tractors, boats, coaches, and construction vehicles.
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official VEVOR website. Keep your purchase receipt as proof of purchase.
If you require technical assistance, have questions about operation, or need to report a defect, please contact VEVOR customer support. Contact details can typically be found on the VEVOR website or in the product packaging.
Website: www.vevor.com





