PHILIPS MG7962/30

Philips Multigroom Series 7000 All-in-One Trimmer

Model: MG7962/30 - User Manual

1. Important Safety Information

Read this user manual carefully before you use the appliance and save it for future reference. Always keep the appliance away from water sources. Failure to follow these instructions may result in electric shock, fire, or serious injury.

2. Product Overview

The Philips Multigroom Series 7000 is a versatile all-in-one electric trimmer designed for comprehensive grooming of your beard, hair, nose, ears, and body. It features 19 accessories, self-sharpening metal blades for lasting precision, and a robust lithium-ion battery providing up to 120 minutes of cordless use.

This trimmer offers 26 cutting lengths, ranging from 0.5 mm to 20 mm, allowing you to achieve your desired style with precision. Its BeardSense Technology adapts power based on beard density for an efficient trim on all beard types.

Included Accessories

The Philips Multigroom Series 7000 comes with a comprehensive set of attachments to cover all your grooming needs. Refer to the image below for a visual guide to the included accessories.

Philips Multigroom Series 7000 all 19 accessories laid out

Figure 2.1: All 19 included accessories for the Philips Multigroom Series 7000.

3. Getting Started (Setup)

3.1 Charging the Trimmer

  1. Ensure the trimmer is switched off before charging.
  2. Connect the USB-A charging cable to the trimmer's charging port.
  3. Plug the other end of the USB-A cable into a compatible USB power adapter (not supplied) or a USB port on a computer.
  4. The charging indicator light will show the charging status (empty, low, full, charging). A full charge provides up to 120 minutes of cordless use.
  5. Disconnect the charger once the battery is fully charged.

3.2 Attaching and Detaching Trimmer Heads and Combs

  1. To attach a trimmer head (e.g., metal trimmer, precision head, nose/ear trimmer, body shaver, wide hair trimmer), align the head with the trimmer body and press it down until it clicks into place.
  2. To detach a trimmer head, gently pull it upwards from the trimmer body.
  3. To attach a comb, slide it onto the desired trimmer head until it locks securely.
  4. To detach a comb, gently pull it off the trimmer head.
Image showing different comb attachments and their cutting lengths

Figure 3.1: Illustration of various comb attachments and their corresponding cutting heights.

4. Operating Instructions

The Philips Multigroom Series 7000 is 100% waterproof, allowing for convenient wet or dry use. Always ensure the trimmer is clean and charged before use.

Man using the Philips Multigroom trimmer for beard, hair, and body grooming

Figure 4.1: The Philips Multigroom Series 7000 in use for various grooming tasks.

4.1 Trimming Your Beard

Close-up of the premium precision comb with length settings

Figure 4.2: Detailed view of the premium precision comb's adjustable settings.

Illustration of BeardSense Technology detecting beard density

Figure 4.3: Visual representation of BeardSense Technology in action.

4.2 Trimming Your Hair

4.3 Grooming Your Body

4.4 Trimming Nose and Ear Hair

5. Cleaning and Maintenance

5.1 Cleaning the Trimmer

The Philips Multigroom Series 7000 is 100% waterproof, making it easy to clean under running water.

  1. After each use, switch off the trimmer and detach the trimmer head and comb.
  2. Rinse the trimmer head and comb under warm running water.
  3. Rinse the trimmer body under warm running water, ensuring no water enters the charging port.
  4. Shake off excess water and allow all parts to air dry completely before reassembling or storing.
  5. For a more thorough cleaning, use the small cleaning brush (if included) to remove any trapped hairs from the blades.

5.2 Blade Care

The trimmer features ultra-robust self-sharpening metal blades that provide optimal precision and remain sharp as new without the need for lubrication. No oiling is required for these anti-corrosion, easy-to-clean blades.

6. Troubleshooting

If you encounter any issues with your Philips Multigroom Series 7000, please refer to the following common problems and solutions:

Problem Possible Cause Solution
Trimmer does not turn on. Battery is empty or not charged. Charge the trimmer for at least 1 hour. Ensure the charging cable is properly connected.
Poor cutting performance. Blades are clogged with hair or attachment is not correctly fitted. Clean the trimmer head and blades thoroughly. Ensure the attachment is securely clicked into place.
Trimmer makes unusual noise. Hair trapped in the motor or a loose component. Clean the trimmer thoroughly. If the noise persists, contact Philips customer support.
Skin irritation after use. Incorrect technique or sensitive skin. Ensure you are using the correct attachment and technique for the area. Trim on clean, dry skin. If irritation persists, consult a dermatologist.

7. Technical Specifications

Feature Specification
Model Number MG7962/30
Brand PHILIPS
Power Source Battery Powered (Lithium-ion)
Run Time Up to 120 minutes
Charging Time Approximately 1 hour
Blade Material Alloy Steel (Self-sharpening metal blades)
Cutting Lengths 0.5 - 20 mm (26 settings)
Special Features BeardSense Technology, 100% Waterproof
Recommended Uses Beard, Hair, Nose/Ears, Body, Intimate areas, Underarms
Color Black
Dimensions (Package) 23 x 15.9 x 7.1 cm
Weight (Product) 530 grams
Country of Origin Germany

8. Warranty and Support

This Philips appliance comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For product support, troubleshooting assistance, or to inquire about warranty claims, please visit the official Philips website or contact Philips customer service in your region. Contact details can typically be found on the Philips website or in your product documentation.

Visit Philips Support Website