MMWOWARTS H2 Hybrid Active Noise Cancelling Bluetooth Headphones

1. Introduction

Thank you for choosing the MMWOWARTS H2 Hybrid Active Noise Cancelling Bluetooth Headphones. These headphones are designed to provide a superior audio experience with advanced noise cancellation, long battery life, and comfortable wear. This manual will guide you through the setup, operation, and maintenance of your new headphones.

2. Safety Information

• Do not expose the headphones to extreme temperatures, humidity, or corrosive environments.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not disassemble or modify the headphones. This may void the warranty and cause damage.
• Clean the headphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause irreversible hearing loss.
• Keep out of reach of children.

3. Package Contents

Ensure all items are present in the package:

• MMWOWARTS H2 Hybrid Active Noise Cancelling Headphones
• Type-C Charging Cable
• User Manual (this document)

4. Product Overview

Familiarize yourself with the headphone components and controls.

Figure 1: MMWOWARTS H2 Headphones. This image displays the black over-ear headphones with silver accents. The left earcup shows volume controls (+/-), a multi-function button, a microphone, a USB-C charging port, and an ANC button. A small blue LED indicator is visible on the right earcup.

Controls and Ports:

• Volume Up (+) / Next Track: Short press for volume up, long press for next track.
• Volume Down (-) / Previous Track: Short press for volume down, long press for previous track.
• Multi-function Button (MFB): Power On/Off, Play/Pause, Answer/End Call, Activate Voice Assistant.
• ANC Button: Toggles Active Noise Cancellation On/Off.
• USB-C Charging Port: For charging the headphones.
• LED Indicator: Displays power, pairing, and charging status.
• Microphone: For hands-free calls.

5. Setup

5.1 Charging the Headphones

1. Connect the provided Type-C charging cable to the USB-C port on the headphones.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will show red during charging and turn blue or off when fully charged.
4. A full charge takes approximately 2-3 hours.

5.2 Powering On/Off

• Power On: Press and hold the Multi-function Button (MFB) for 3 seconds until the LED indicator flashes blue and you hear a power-on prompt.
• Power Off: Press and hold the Multi-function Button (MFB) for 3 seconds until the LED indicator flashes red and you hear a power-off prompt.

5.3 Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the Multi-function Button (MFB) for 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
3. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
4. Select "MMWOWARTS H2" from the list of found devices.
5. Once connected, the LED indicator will flash blue slowly, and you will hear a connection prompt.
6. The headphones will automatically reconnect to the last paired device when powered on, if Bluetooth is enabled on the device.

6. Operating Instructions

6.1 Music Playback

• Play/Pause: Short press the MFB.
• Volume Up: Short press the '+' button.
• Volume Down: Short press the '-' button.
• Next Track: Long press the '+' button.
• Previous Track: Long press the '-' button.

6.2 Call Management

• Answer/End Call: Short press the MFB.
• Reject Call: Long press the MFB for 2 seconds.
• Activate Voice Assistant: Double-press the MFB.

6.3 Active Noise Cancellation (ANC)

• Toggle ANC: Short press the ANC button to turn Active Noise Cancellation On or Off. An audible prompt will confirm the status.

7. Maintenance

7.1 Cleaning

• Wipe the headphones with a soft, lint-free, slightly damp cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Ensure no liquid enters the ports or speaker grilles.

7.2 Storage

• Store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures.
• If storing for an extended period, charge the headphones at least once every three months to maintain battery health.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official MMWOWARTS website. Keep your proof of purchase for warranty claims.